Видео

Would it be possible to not use the upper pole so the whole height could be reduced by a couple feet? We’re trying to find a good model that is under 72” but all we see are these that are 88-90” tall.

How long did this take you to assemble the one rack?

Just got this for Christmas, big help thanks!

Can’t take the music.

The reason the winded was pointing the direct it was, was not due to pointing north, but you had the station on an angle while on the table, and one end of the windex was heavier than the other. Gravity of he situation

Why are you talking so softly?

Great vid!! I’m planning on building the same thing for my above ground pool

Wow!! POS is up and running 😂😂🤦‍♀🤦‍♀ Wish I would have found this before I pulled all the batteries to see if they were burnt up (again!). Thank you SO SO MUCH for this video!!!

Can't thank you enough. Mine came without instructions. Found your video and it helped tremendously.

Worked like a charm, cheers!

Hi thanks for the video, it's very informative. I'm looking for your video on the solar kit. Have you posted it yet?

I have this heater and the hardest part of the assembly was peelling the blue plastic off. Mine was very thin and difficult to remove. The rest was easy. It works very well.

We are looking into getting this shed as well but are hesitant due to the missing parts issue. By any chance, do you have the contact information for the Costco liason who assisted you? I am glad everything was resolved. Shed looks beautiful!

Very nice work!! Love the solar and lights. Thanks for putting the check list for completing the shed... Mucho Helpful!! Inside and Flooring paint - great idea!!

Hey how you doing is there anyway you can do a video on how to keep the white led light on cause I can’t find a video on it or can you guide me on how I do mine

Great idea to paint the inside. Looking to get the 8x12 from Costco currently on sale

Can anyone mention what size screws, nuts, bolts used for this installation, especially the bolts going into ceiling. I’d like to just go to Home Depot and get my own instead of buying their kit.

Where is the link to the fb group?

Thanks! Mine was doing the same thing and when I got in there the connection seemed loose and after pushing one of the wires a little further, it's back to working without having to make the switch.

It is worth mentioning that you should check with a Honda dealer parts department on what exact plugs your vehicle takes. This is done by using the VIN number when speaking with the parts department. I say this because my Honda Accord takes the NGK IZFR6K-13 plugs gapped at .052 and not the NGK IZFR6K-11 plugs, gapped at .044. This is because my car is a SULEV and PZEV model. The car and emission system and tuning were designed for this plug. Without using the VIN to check I would not have realized this because NGK's site lists both plugs for a 2007 Honda Accord.

Soundtrack slaps.

Did you build it on top of 4x4? I have a concrete pad and I’m thinking about not building it with those 4x4 mentioned in the instructions.

Just ordered an 8x12 version of this shed, and I'm pretty worried. Have you thought of insulating it? It looks like the studs are 20" on center. Is that correct?

Good job but music was way hot

Mine came with adapter

I just wanted to drop back in here to thank you so much for this battery replacement video. I replaced the one that led me here. And then I just replaced a 2nd one. The first was really difficult, took 3 days with breaks. The 2nd I just did, and it took an afternoon. Unlike this old picture I have on this account, I am actually 66 yo. Again thank you so much. edit, wrong video but you know the one you did.

How much did it cost?

Thank you very much for posting this video! We had the same situation and we switched the 2 wires like you mentioned. Our mower is now working perfectly.

This is weird. Last year i changed my batteries to lithium ion, and this year I slid the tray out and charged all 4 batteries to full individually and restored the wiring, slid it back in. An hour later, I decided to plug the aftermarket charger in I have, and POP! Loud spark at the charger port and now the mower is stone dead. I tried bypassing the lockout circuit by snipping off the red, yellow and black connector and when I simply touch the red and yellow it arcs again so the fuse I put in will likely blow. EDIT: I put a 5 amp fuse in the connector RED and YELLOW wires like this video and it is holding fine. I can't charge out of the original connector, but I can charge directly on the end of the 4 12v batteries so yeah, crazy that this connector runs the whole mower.

Part is discontinued

Bloody hell! My wife was also not-so-merrily doing the seat dance, recruiting handy neighbours (we live in the middle of nowhere, so no hope of finding a local repair shop) to look at the mower, and punching the side of the mower until her knuckles bled... praying to get one more mow out of what is otherwise a brilliant piece of lawn equipment. Thank you so much for the link to the FB group and for doing this nifty little video. Much appreciated.

Thank you so much! I have a lawn that's barely enough for a rider and I didn't want to go out and spend a G on batteries. This did the trick. Thanks again man!

Thanks for the info. I had called Ryobi and they shuffled me off to a non Ryobi website at a cost of $40. They were no help as they did not know the machine, however the guy happened to mention that there was info on utube. Thanks again for help.

Charge port is discontinued- anyone having luck finding other replacements?

Get to the point quickly

Good job going to attempt 😊

Thanks! I wouldn't have thought to switch the order of the wires. Nice quick fix

I've read that when the temperature sensor is embedded in the weather station, the readings can be abnormally high when in direct sunlight.

Nice video. Did you end up getting a battery box or holder?

Is there another fix just checked the links and there discontinued

Thank you

I love the internet. This worked. Thank you.

Thanks! This is exactly what I needed to fix my mower.👍 Really appreciate you making this video.

So is it because the switch is acting up and needs to be replaced? Mine first turn key sometimes does not work and I have to try the second time. Need to change the switch or do as the video shows?

This not starting on first turn of the key had worsened last season to the point of turning the switch off and on 20 times or so before it would start….for some reason when damp outside it would also cut the blades off and or stop running. This 5-minute fix cured what I thought was going to be a much worse problem and plagued me for more than a year! Thank you!

Your back fence is awesome! I am impressed

A HUGE thank you for this video. My husband bought our 38" Ryobi mower 3 years ago and it barely has 30 hours on it as of today! It had the exact problems you described with the ADDITION of throwing the mower into reverse while he was on it moving forward. BIG SAFETY ISSUE. We had it in an authorized shop THREE separate times for months each time. Guess that is what you get when you send an ELECTRICAL ISSUE to a shop that only understands engines. Thank goodness we got the extended warranty! They finally said they would reimburse us for the cost of the mower ($3,500.00) but they would not come and get it. So we were stuck with this thing that he just couldn't trust getting back on. Then........... he saw YOUR VIDEO last night. First thing this morning he did exactly what you said to do and NOW we have this great FREE $3,500 mower. The batteries are doing great as well! So THANKS SO MUCH!!!!

Wow, so easy. Worked great. But I ordered a new switch, and I'll swap it out, but I'll keep the old one as an emergency backup. Thanks. The Ryobi tech said it was the relay, a lot harder to replace. Back in business for now. Love the mower, but Ryobi needs to develop a better servicing network.

It’s alive !!!!!

Sound is not the best.