Видео

Pella Architect classic series windows. Same exact issue. Pella's response: There is no warranty on the wood sash. 1,000 per sash to change out with new. Other window companies consulted want 30,000 for just four window sash replacements. We have 11 rotting sashes and two doors. I wish I could find a craftsman who could do this for me. I wish I could find a lawyer to take on these thieving, window shysters'.

Nice to see our propeller on such a beautiful airplane!

Geezer, Since yours was fixed, it appears you had to destroy the old sash to remove it. My sashes are movable. Guessing you would have suggested using a hand saw or a vibrating saw to disassemble the mortise joints? Even still they're hard to get apart, esp if trying to save the glass! I'm slo but 2 hours for removing clading, diesel fuel, razor knifing edges, and sawing apart the joints. Only a job for the careful and the most determined among us.

Geezer, is it possible to get the precise sizes of the router or shaper tools you used?

Pella sucks and add a casement window to the equation is pure maddening. I will never own a casement window again. A hard no

your doing the lord’s work. thank you. fire that thing up and show us some operating performance :)

Nice

I was able to cure my shingles completely within just three weeks of using the natural herbs supplements I ordered from Dr Igudia on RUclips

Do you think your wood CAD specs are the same for Pella Designer series?

Most refrigerants are flammable to some extent. They had to incorporate more hydrocarbons in the mix to reduce toxicity and environmental reactions. As you pointed out, it is a very small quantity. Domestic propane has the advantage of having an aroma added, so a major leak may announce itself to your nose. It is also heavier than air, so unless there is an ignition source below the leak, it will be hard to get it into the right place at the right A/F ratio to ignite… Nice experiment!

Thanks to God for letting me knowing about Dr Igudia on RUclips who cured my Herpes Virus completely with his natural herbs medication which I ordered from him with just three weeks of using the herbs supplements

I use this method on my roofing as well. I'm not a contractor, but I have re-roofed my own house (12 square) and garage (10 square) with this method. It allows me to work by myself without exposing the entire roof to the unpredictable Maine weather as stated by another poster. The finished product is exactly the same installation. The only difference is the order in which it is installed.

I sent in all the class action information the first time around including pics and serial numbers. Then I re-sent it all in after the first set of LAWYERS were fired. Requiring everyone to RE-SEND all the details of the claim, which I did. Got no information back, then was told it's over and I didn't send the correct info in. An outrage! Thanks PELLA.

This is a great way I saw to dry soil in a pinch. A Propane Weed Torch attached to a VersaMule modular load harness Have you ever used one? ruclips.net/video/uzz3Cy0IBPI/видео.html

I installed 30 pella windows about 1985 in a house rework and expansion. The are of the the unsealed type. My house was built in the 1949 by a person with a hammer in one hand and a brown bear bottle in the other. We discovered the empty bottle stash during the foundation expansion. The pella list was 20ea. 42x16 swing out casement with rolls screens, 4ea. 42x16 fixed, 3ea. double hung, and 3ea. swing out awning. I bought pella because at the time friends were having having seal problem with Anderson. Every seal on the pella windows leaked. Moist inside air was getting between the panes. So much cold air was coming in the top weep hole going out the bottom holes the the lower inside glass temperature almost matched outside air temperature. Called pella the first North East winter after instillation with moisture problems between and on the bottom inside. The first words out of their mouth was " THEY WERE NOT INSTALLED CORRECTLY." And by the way they would not come out to inspect them. Years later I was going through the paper on the house and found papers from the windows. The papers stated that there was a long term warranty on the seal. The warranty period was not expired. I called pella " we do not make that product any more. Your window do not have a seal that we warranty. " MY REAL REASON FOR THIS RANT IS. I want to get rid of the roll screens. The seal at the top of the window is poor and we never use them anyway. DOES PATTERN FOR ENDS OF THE TOP INNER STOP EXIST.

What kind of gas do you put in it

Break these engines in correctly keep filters clean change oil don’t let it sit with gas in the fuel lines and carburettor during storage and they will run for years. I have well over a hundred hours on my Harbor Freight compactor runs like new.

These have gone up in price since then. I have used similar machines in Chicago to prepare sidewalks or drive way pours. Awesome machine.

Getting paid by the hour 🙌

This is a great machine

That looks like the soleous air dehumidifier that was recalled. Same problem lost refrigerant charge and compressor would not kick off. Really badly done friction welds on these. They work ok on 134a after you solder over the welds. All of them...🤓

I watched your video and while there may be a couple small advantages to this style I think it is a style that I would NEVER use! Quite frankly there's no way in hell I would do a roof that way!!!!

Thank you so much for this detailed description. I was ready to pay someone to do mine. But I think with this I can do it. If I make the parts ahead of time, I can see having the pane out for a very short period. Is it possible to get a PDF document with the drawing, rather than having to take it from the video clip?

I own one and this thing starts with one pull in the middle of the winter, I can move it around by myself

This is a pize a cheets

Elenberg

geezeguy: Thank you for this video. I have a Pella Double Hung window. the bootm rail of the upper sash is rotted. I'll follow what you have done here. But can you provide any helpful hits for the Double Hung ? It would be very much appreciated. Pella says they no longer manufacture repalcemnt Sash for this year window (1994). The only option they offered was to remove the entire window and replace it with a new unit. The costs is $2,000. But the skill and labor to do that will require more expenses , as the outside Cedar House trim must be completly removed to get to the Nailing Flange. Thank you much in advance.

Just repaired 8 of my 16 windows. I caught a few early enough that I could just use wood putty. Some I needed to add wood. The lower sil rot called my attention to the issue. My 1-2 day job started last week. Turned out nice. Gmail DrColg8 if near Reading, PA & need help ;)

Anyway to seal it before it get this bad?

I have stumbled upon your videos and appreciate them so much, I'm disappointed there aren't more. You strike me as someone who regularly DIYs. Please consider videotaping future projects. Even small projects are teachable opportunities. Your voice is pleasantly modulated and directions methodical, were you a teacher before retirement? Perhaps a math teacher?

I have pella proline casement windows and they are total junk!! Do not buy you will regret. Lots of excuses from pella. Viewed to be the worst!!

I really like your straightforward candid comments great video thank you very much

Where are you located , I have work for you if interested.....smile

Watch video Masterpac plate compactor -ruclips.net/video/xGVX5kNLqEs/видео.html

What was the material to cover the loose row for rain ? Does it cover to old shingle row below?

I saw this in the harbor freight website and was like what kind of weird no tires lawn mower is this haha so I had to youtube it. Ok cool I now know what it is lol

Same thing has happened to me ... 5 windows... ROTTED Sash ON BOTTOM. Pella says over $1000 per windows to change a Sash only!! Sister has same age home with ANdersen. No Rotting. Pella says the old class action law suit is now closed and it's time to screw a new set of existing Pella customers.

It's great to see others who have found this method valuable! One of Fine Homebuilding's most trusted authors, RI builder Mike Guertin, uses the top down technique all the time, and he documented it a few years back on our website: www.finehomebuilding.com/2016/10/17/upside-down-roofing

I think I have the same machine and same problem. Is it r22? Liquid propane? Vapor? how did you get the propane in? Propane from 20 lb grill tank? I love the idea and would do the same. Thanks!

Dam you did good work come do mine ill pay you

Mine did the same they should get sued

15 dollars a window and 2 weeks! There are easier ways sir. But if you have the time and a shop your good to go! Have fun!

Excellent job but how the heck can a regular joe cut thoses cut from the dwgs or is there a short cut ?

I have a casement windows which rotted out the bottom rail what I need to do is replace it can I do this and do you know of any videos

Mine is over seven years old and on it's second engine. It's had a lot of hard use. My only complaint is that there isn't a wheel kit for it

anyone use a coupon?

Mine didn t work for very long. It doesn't walk itself in soil. You had to push to get it to keep moving. I sold it and got a better quality one.

Is that to hide all the bodies?

How can Pella be so hideously cause so many people, who pay top dollar so much trouble and expense and stress. No soul! Evil greed! What are they still doing in business!?

I have one. Runs great and works excellent for packing dirt.