Видео

How did you set you saddle up? Flat 0 degree from tip to tail?

Good job… but those brake sensors are sketchy 😂

Thanks for the vid. I have a 142mm axle and am using the Lekkie 42 tooth narrow wide Bling Ring. It's made just for this, perhaps an oversight on Bafang's part. It's made of 7000 series aluminum and is offset is approx. 12-13mm (difficult to measure when installed). Barely clears the frame, but it clears and the chain line is near perfect on a 10 speed cassette. I have about 3000 hard miles on mine and no signs of wear. I think it was $70 or $80 which seemed high at the time but it is worth it. My clearance looked about like yours with the stock chain ring, the 2 tooth smaller diameter of the Lekkie make it work. Regarding the battery mount, I would try reversing it (180 degrees). Counter intuitive as that may look when standing still, once your thrashing around on the trails you realize the lock is what holds the battery in place, not gravity. Also, the two water bottle bolts were designed to hold about 3 pounds, so I use straps like yours, but not elastic.

My dura ace is saved

Can you recommend a kit for a 11x1 with a 30 tooth chainring? I’m assuming that my small chainring was engineered to the 11 cassette

Thanks for the video. I didn't know that bridge had a bike lane.

I've Tried a few seats and got on ok with Fizik I just got this I'm hoping it will work I always get pain where the cut out is so I hope with this cut out it helps Thanks for the review.

When is the step by step installation coming? :)

I've been contemplating buying some HTZ rims for touring and bikepacking but the offset presta hole might effect going with tubes.

Hopefully replacement parts are available.

Pedal power did you buy from Alibaba, and if so which shop?

I 3d printed some that screwed into the presta valve Thank you for your video it let me to the right thing I needed to print

Have you tried contacting their support? did they respond?

Is it true these motors does not work with a rear hub brake?

Well done! It worked in theory and you proved it in practice, now you can head for the hills with confidence!

What is that blue sticker with four circular lens type 1:54

Excellent work! Great wire placement! Do you have a video showing the ride ability?

The window in the box appears to have been placed via employee with hangover.

I can’t get my sram apex with 42t cassette to work properly with an extender. It is ok with 32t in front, but shifting at 50t is horrible. I can’t understand what can I do. Maybe shorten my chain a little?

It's such a beautiful thing watching the chain shift like that.

Nick thanks alot bro I was wondering why was it not shifting sigh guess I have to download the app so that it can work thanks again can you send me the link for the app so I can download it ??

How can I get the accmlolic

COMPLIMENTS ON THIS VIDEO WE ARE NEW TO EBIKE HARDWARE AND TERMINOLOGY. PLAN ON TWO BIKE UPGRADES WE WANT TO DO A MIDDRIVE TO A VIRIBUS TRIKE AND FOLLOW WITH A JUNKER TWO WHEEL BIKE. YOUR UPACK AND SUBASSEMBLY LAYOUT AND MEASUREMENTS WERE MOST INFORMATIVE, FOR WE THE IGNORANT,. HAVE SUBSCRIBED. DO YOU ALSO BUY/SELL BIKE COMPONET PARTS, THE EXTENT OF YOU VIDEOS SEEM TO IMPLY THAT, BUT NO WEBSITE LISTING. PAST THAT YOUR VIDEOS ARE FOR ME VERY EDUCATIONAL IN THIS SUBJECT AREA.

I sanded the molded seam on the underside with a Dremel tool. Much better 👍

Great review thank you!

Are you still using the Bontrager Commuter saddle? I'm interested in purchasing it.

Thanks for creating this video, very helpful.

Thank you for this. I managed to incorrectly use a pump and deflated my whole tire until I found this video.

I check all my quick release levers on my tires and seat. They might get bumped loose especially if you have to transport your bike.

He forgot about the bike lock if you don't want to walk back unexpectedly.

1. I have a proper road bike. Damn I can't find any battery on it. Where did they vanish? 2. 4.5 bar is jokingly low. I ride my 23mm tires at 7.5 bar. I don't love the sound of curbs smashing my rim. 3. I don't clean the drivetrain. The rain does that for me. Contrary to youtube wisdom superficial dirt doesn't matter. 4. I live in a civilised part of the world. Shops are everywhere. I con't care what I eat. 5. This is actually indeed a good advice. BTW. Mini electric pumps turn out to be working great. 6. Red mini backlight is good. 7. Why is everyone pushing those silly styrofoam placebos as protection?

For the quick link, i use this on same chain on my mtb 11 speed. I take off the chain every time i get home from a ride, so far i have removed the quick like probably more then 120 times never had it do anthing weird when riding. I mtb some pretty rough turrain and climb alot of big hills. I do carry a spair quick link in my back pack. You do not have to replace the quick link after one use trust me it a selling gimmick.

Duh, Pick your bike everytime?

If you wax your chains then no cleaning needed!

they '' leaving the bag open '' is a really smart move

Well done. I enjoyed your video a lot. I liked the choose your bike portion as well because I have that issue frequently being that I own several bike with different tires and wheel sizes and set ups for road gravel or mountain biking.

bro is so authentic and sincere, great video

Fun video. But dude, you need a track bike, and a TT bike :)

One e-bike check

wow. nice bike collection. great tips, pedal power. thanks!

Do you Yanks ever do something without GOING AHEAD first? You must have used this useless phrase a hundred times and it adds NOTHING to the commentary!

Magkano yan 9 speed na alivio

None of the instructions online mention pairing the shifters wirelessly. Seems obvious afterwards but not if you are just following the directions. Thanks.

Hey man, I took the black clip off my pump and now won’t go back in. Any ideas?

Lebih baik m7000 atau m5100 ,Bro?

You had the trail to yourself, so cool! I gotta try it one day. I know you mention your neck is neutral so you don't experience any pain but for some reason, it reminds me of a performing a hollow crunch and my neck def. gets annoyed there. Was there an adjustment period with your neck?

Grin makes a rear hub that fits your trike.

What do the :bv, bk & bj initials on the cogs mean??

holly molly, man u help me so much, thank you

Instead of 2 small pieces of tape on either side, you could take one longer piece of tape & put a hole in it for the presta valve. Helpful info on how to adapt a presta tube to use in a rim with schrader hole. Thanks. I can't get this adapter anywhere. I'm sure other hacks might work, such as cutting a hole of rubber out of a used tire or other source, to make a sort of 'disk' at the base of the presta... maybe stack a few of them... or wrap the base of the presta with duct tape.... or search the hardware stores for odds/ ends to devise a solution.