![RPM Chuck - Nitrous Chronicles](/img/default-banner.jpg)
- Видео 47
- Просмотров 728 059
RPM Chuck - Nitrous Chronicles
США
Добавлен 5 авг 2012
Hang out with Chuck Scott from RPM Magazine.
Bead Roller / Tubing Bender Combo????
I use a trailer hitch and receiver to create a versatile mount for a Woodward Fab bead roller.
As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Woodward Fab Bead Roller
amzn.to/3EldsIH
Hitch Receiver Tube
amzn.to/3EgNSVi
2x2" Square Tube (if you don't have an old hitch to cut up)
amzn.to/3XKUL86
Woodward Fab manual tubing bender
www.amazon.com/Woodward-Fab-B...
Woodward Fab bender stand
www.amazon.com/Woodward-Fab-W...
Swag Offroad ram mount kit
www.amazon.com/SWAG-Machined-...
#RPMChuck #NitrousChronicles #SwagOffroad #WoodwardFab
As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Woodward Fab Bead Roller
amzn.to/3EldsIH
Hitch Receiver Tube
amzn.to/3EgNSVi
2x2" Square Tube (if you don't have an old hitch to cut up)
amzn.to/3XKUL86
Woodward Fab manual tubing bender
www.amazon.com/Woodward-Fab-B...
Woodward Fab bender stand
www.amazon.com/Woodward-Fab-W...
Swag Offroad ram mount kit
www.amazon.com/SWAG-Machined-...
#RPMChuck #NitrousChronicles #SwagOffroad #WoodwardFab
Просмотров: 650
Видео
Cheapest Aluminum MIG Welder - Part 3
Просмотров 13 тыс.Год назад
I try out the brand new Tooliom TL-250M aluminum capable MIG Multi-Process welder. Part 3 - MIG welding aluminum. Amazon link to the Tooliom TL-250M amzn.to/3uoRCPh As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post. #RPMChuck #NitrousChronicles #Tooliom #MIG
Cheapest Aluminum MIG Welder - Part 2
Просмотров 12 тыс.Год назад
I try out the brand new Tooliom TL-250M aluminum capable MIG Multi-Process welder. Part 2 - MIG welding plate steel. Amazon link to the Tooliom TL-250M amzn.to/3uoRCPh As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post. #RPMChuck #NitrousChronicles #Tooliom #MIG
Cheapest Aluminum MIG Welder - Part 1
Просмотров 11 тыс.Год назад
I try out the brand new Tooliom TL-250M aluminum capable MIG Multi-Process welder. Amazon link to the Tooliom TL-250M amzn.to/3uoRCPh As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post. #RPMChuck #NitrousChronicles #Tooliom #MIG
The Break In / 540 Fabrications Outlaw Small Tire - 660 Live No Prep at Motor Mile
Просмотров 910Год назад
19 cars fight it out in the final 660 Live event of 2022 at Motor Mile Dragway
Junkyard Dog Terry Harris Interview for "The Break In"
Просмотров 356Год назад
I talk to veteran racer and 2 time KOTS season champion Terry Harris about his new Camaro and his old one.
Steve Austin Interview for The Break In
Просмотров 656Год назад
I talk to Steve Austin about the new Nova, 10.5 Outlaw, Street Outlaws No Prep Kings and The upcoming 660 Live No Prep at Motor Mile Dragway.
Street Tease - Lori May Thompson Interview
Просмотров 467Год назад
Getting ready for 660 Live No Prep Racing "The Break In" I have a Chat with Lorri May Thompson, driver of Street Tease Turbo SB2 Mustang.
Interview with Brent Austin "Megladon"
Просмотров 4,5 тыс.Год назад
Interview with No Prep Kings $200K winner and No Prep pioneer Brent Austin.
JJ da Boss at Motor Mile Dragway - Big Tire Final
Просмотров 3,3 тыс.Год назад
Heifer vs Barry Gladden's Mustang
Intro to Drag Racing / How To
Просмотров 250Год назад
How different trees work. Bracket Tree, Pro Tree and Instant Green Tree
Power Fest 2022 This Saturday
Просмотров 1212 года назад
Motor Mile Dragway 6749 Lee Hwy, Radford VA July 23rd gates open at noon, racing starts at 2
660 LIVE RULES DISCUSSION
Просмотров 2152 года назад
We go over the rules and procedure for 660 Live No Prep events.
Monster Truck Show
Просмотров 272 года назад
This weekend, Friday, Saturday and Sunday. June 24, 25 & 26th
Responsible Brush Pile Burning
Просмотров 2542 года назад
See how I burn debris piles safely as possible. NO GASOLINE.
Renting a Stump Grinder. You Can Do It!!!
Просмотров 44 тыс.2 года назад
Renting a Stump Grinder. You Can Do It!!!
Mustang Suspension Rehab part 1 - EZ Torque Box Upgrade
Просмотров 1,8 тыс.2 года назад
Mustang Suspension Rehab part 1 - EZ Torque Box Upgrade
Custom Vintage Air 3 Knob Control Panel for a 66 Chevelle
Просмотров 3 тыс.2 года назад
Custom Vintage Air 3 Knob Control Panel for a 66 Chevelle
Cheapest Hydraulic Tubing Bender On Earth
Просмотров 343 тыс.2 года назад
Cheapest Hydraulic Tubing Bender On Earth
Staging Duel - Brian Cunningham vs. Matt Lawrence
Просмотров 1983 года назад
Staging Duel - Brian Cunningham vs. Matt Lawrence
Friday Night Fights - King of the Streets July 23rd 2021
Просмотров 4633 года назад
Friday Night Fights - King of the Streets July 23rd 2021
Post Lockdown Return of King of the Streets
Просмотров 2953 года назад
Post Lockdown Return of King of the Streets
Best Spray Foam Insulation in a Metal Garage / Building (Sprayed Thin)
Просмотров 107 тыс.3 года назад
Best Spray Foam Insulation in a Metal Garage / Building (Sprayed Thin)
I TRY THE CHEAPEST 200 AMP MIG WELDER ON AMAZON - $250 TOOLIOM 200A
Просмотров 136 тыс.3 года назад
I TRY THE CHEAPEST 200 AMP MIG WELDER ON AMAZON - $250 TOOLIOM 200A
Easy Air Compressor Plumbing - RapidAir MaxAir 3/4" Master Kit Garage Install
Просмотров 15 тыс.3 года назад
Easy Air Compressor Plumbing - RapidAir MaxAir 3/4" Master Kit Garage Install
Easy 5 Minute Bee Trap (Carpenter Bee, Bumble, Bore)
Просмотров 11 тыс.4 года назад
Easy 5 Minute Bee Trap (Carpenter Bee, Bumble, Bore)
doesnt look very sharp, bouncing alot
Im looking at this welder. Decisions, decisions 🤔. Guess i need another 🍺.
Amazon has this TL-250 now for $349 and a $40 off coupon. So $309 and change. I'm real tempted.😮
@dalee.mccombs8571 That's a weeks worth of groceries in this economy.
So as I understand it, you can't tig weld aluminum with these because it's not AC? You can only MIG weld and it's not nearly as good?
@Dyl_Cam correct. The TIG function is DC only. MIG for aluminum is more functional than cosmetic. Your not going to get the shiney smooth joints like you can with TIG but it still works and functions fine.
Are you using 120v or 220v for aluminum mig welding. Thanks for the videos.
@guybarnett131 220v. I've only used it once on 120 to fix something outdoors. It definitely runs waaaayyy better on 220. It basically only has half capacity on 120. The digital display won't allow you to turn it up higher than the power supply permits.
Him and Larry are two of the nicest guys you will meet. Miss seeing them get after it at New london
what is the cost to hire stump grinder wigan
Perfect video, i only realized aluminum welding was happening in video 3. 1 and 2 was just steel.
These are not easy to run , smaller cuts and maintain blade speed is the key
I'm going buy one for my boat project thanks your video help me alot . Thanks
bed frame rails have a high carbon content to support fat people which becomes very brittle and prone to cracking after welding.
What is the difference between a 250M and a 250A?
I just used my Tooliom 250m on steel for the first time and i love it.
It smokes some thick steel fo sho.
@@rpmchuck-nitrouschronicles oh yea it will
How do you feel about longterm usage?
I've had my Tooliom 200 mow for 3 years. As good as it runs and cheap as it is , I wouldn't be mad at it if it quit this weekend. I doubt it will though. They might cut a few bucks with the torch but for the rest of it, the quality is on par with units costing 3-4 times more.
Damn, everything this cat has looks like some shit he's pulled out of a dumpster other than the things that looks like was given to him, that bender and the kit from Swag Offroad!!! And BTW, I highly doubt it's the coupler that leaks, my money is on the hose clamp tha's on that patched up air hose. That air hose was most probably found in a dumpster as well!!!! The way this crappy video went I wouldn't let this clueless fool assemble a spoon for me!!!
Once you switch the liner out for aluminum can you go back to steel without switching the liner? Or should I just buy another torch gun for steel?
I probably wouldn't. I'd keep that liner for just the soft aluminum to keep any cross contamination away and keep from snagging in it since it will be easy to gouge.
I removed my Chinese bender from the vertical riser and added a piece of receiver tubing and mounted a few receivers around the shop and this way it can be mounted all over the shop. Also mounted other stuff( vices and the like) to receiver, making the whole mess more versatile. Can even slide the stuff from the shop can in a pinch be slid into the rear of the truck…..end of many problems…
I actually added a receiver to this bender stand to add a bead roller. ruclips.net/video/Jhokq_UAYF4/видео.htmlsi=l6Jnmi4W1Us257xu
I just bought me one LT-CT5200 tooliom. Didn’t burn 7018 1/8. Plugged to 110 🤷🏼♂️.
You lost me on the swapping the cable bossman sorry lol
If I have to buy one witch one would you choose for the price?
If you don't need to weld aluminum, I'd pick the 200.
can you do this just for the seams for a better seal and vapor barrier. Then add fiberglass batts for a much higher R ?
I’m gonna tell you the same thing I tell my dad when he’s working on his hot rod. “What, are we building houses here!?” 😆😆😆
How thick can this mig welder weld im looking for a budget welder
Just based off of you throwing the bag over your head and continuing the review, youve earned a subscriber lol. That shit had me in stitches.
Thanks brother. Have a good one.
I read that this 250 machine has the fully manual adjustment for amps and wire speed and the automatic/syn setting. And from what ive read, the 200 only has the automatic/syn mode with the fine tune + or - 5 amps. Is this true?
Yes, that's right. At first, I was gun shy of the auto settings, but now I am a fan.
4T sounds like casting with fishing rod. Hit the button, whip the rod, but the line doesn't feed out till you release the button. I don't think I would use it either.
Oh.... gee whiz, pnly known that for 60 or more years. Cotter pin.
Nice to see a torsion bar type torque wrench sill being used
I like them for a lot of stuff. You can actually see how far away you are.
Can you do a vid with the machine, tig welding aluminium. I'm wondering is it a dc or ac machine to know what sheilding gas to get, between argon and helium?
I have a crows foot 10-50 3 pin 220/250 amp range plug outlet. Do they make an adapter to hook this 220 adapter to it?
I really appreciate all three of your videos especially the part where you screwed up and left it in there. I can relate with that. I’ve been trying to find a welder for aluminum in your review. Sent me to buy this Tooliom 250A welder. I saved your videos and subscribed, so I can keep going back and look at them. I can learn more on how to use this welder. Thanks again.
Thank you, all your vids part 1 TO 3 on the tooliom 250 was very informative 👍 i just bought one toolion 250a
Thanks for watchin!
Hello sir.. your video was one that inspired me to buy this great machine...... I watched dozens of video reviews. I'm a first time welder. running a homestead... Always had a lot of tools, but never got into welding.... I'm as old as you are probably older. lol. but I'm very confident I got the right welder. amazing price of 292 dollars, and I'll save that much the first year, maybe triple that much on my rural property it's going to last a long time. I may not use it every day, but when I do, it will pay. I love the color / design. so easy to use. I am impressed with the quality, and clear controls, display I can grow into its full capacity as I learn. I'll do flux core first, then stick welding. I may never try Tig. but I will try aluminum, perhaps with a spool gun.
Good deal! Do yourself a favor and get some MIG gas and solid wire. It's much easier and cleaner.
I gave up on the rental companies around here. They always have bad cutter teeth. Found a guy that grinds stumps for cheaper than I can rent.
I did great bender
Hey Brent after long time, u have been not seen on RACE TRACK, well I hoping to c ur upcoming races is that u gonna change the combo like run on procharge hemi big block or gonna put a hemi promod setup 🤔🤔🤔 ,so u have small tyres and big tyres, what it gonna be plan A plan B 🙋♂️🙋♂️🙋♂️🙋♂️👍👍👍👍
That was simply painful to watch. Some ppl simply shouldn’t make You Tube videos. There’s a reason to do time laps . And use proper tools for the job, an extension socket driver for a punch? Really …….
Good video. Not many people don't make any assembly mistakes so don't feel bad about any of those parts. It did sound and look like you need a more CFPM air compressor to be able to run the bender any faster thoe. Over all good video and enjoyed watching it. 😊
I currently have team z relocated upper control arm kit with standard location lower control arms. Also, have team z drag spring which makes it sit slightly lower than factory. Do you recommend keeping that upper kit or going with standard style upper control arms? Its a stick shift drag fox body.
Relocating the uppers higher on the housing accomplishes basicly the same thing if you keep stock ride height. If you lower the car much, the upper bar angle will be pretty steep, and the instant center will be real short. Stick shift cars are pretty violent, so I'd have as many adjustment points as possible. Those springs work pretty good and don't lower it much. I had some back when they first came out years ago. There are plenty of fast street cars with that Team Z set up. If you really start getting serious, I'd do the upper and lower boxes and go to a coilover with the longest travel shocks you can fit. Then you have the luxury of trying different rate springs. I like using the lightest and longest spring that will hold the car up and go low enough to get the ride height I want with the shock compressed almost all the way with only about an inch left at ride height. That way, you have maximum extension. Then have a good double adjustable shock to control how fast it extends. You want maximum separation over the longest time. If you want to see how a stick car should work, go look up Jonathan Atkins Grubworm Camaro.
Hey wtf chuck!
Where's the girl????
My boss just bought one of these so we can weld our own aluminum . I never weld aluminum before Thank you for the videos very helpful
No problem. Good luck with it. It has taken a little trial and error to find the sweet spot but I've been happy with it.
Hello Chuck. What ports are you placing your ground and electrode in when mig welding aluminum? Thanks!
Pause the video at 32:21 to see the configuration. The ground cable goes closest to the torch.
Perfect, thanks!
yeah man....that saves a lot of manual labour...if you have the ...POWER.....wondering if you lie it down and use your body weight...might work too...electrical work...craft on guy...
Terrible video, its like a vid, saying fastest 55 chevrolet on the planet, then the video talks about the tires the whole time. It would've been better if you talked about the 66 the whole time...
can you run steel wire through the graphine or will that shorten its life?
Probably not enough to mater, but you don't want any steel wire transfer / contamination on the aluminum wire. Just like how you save a wire brush and flap wheel just for aluminum so you don't get any cross contamination into the aluminum. Aluminum is not forgiving at all like steel. You have to keep it super clean.
I *LOVE* this and it’s exactly what I want in my 67. I feel like I could maybe tackle this, but do you have any interest in making another? 😂
Got this one coming and looking forward to messing with it. More mig and tig for my fishing projects. Almost got the plasma cutter to go with it but went a different brand. Thanks for the video 🤙🏻
Amazon wh0re. Harbor Freight wh0r3. Thumbnail doesn't match video. No sub here. 👎🏻