Видео

Thanks for watching. The wheels are 20 inch. The specs are 20 x 9.5 on 245/35/20 front & 20 x 10.5 on 285/30/20 rear on AWD set up.

I think it would be similar. I would suggest non-resonated if you will not be installing downpipes.

​@@javtheautoenthusiast6418 10" with non-resonated?

@@123B012N yes, the Q’s are very quiet and I would recommend non-resonated. Still very unobtrusive when cruising and you will enjoy the sound when you get on the throttle.

No issues at all. Simple bolt on.

Without resonators if you have the VR turbo motor. Even without resonators there is no rasp and the volume of sound is just right in my opinion.

It’s a muffler not a catback.

@@javtheautoenthusiast6418 bought mine yesterday and bolting them in tonight 😭😭 I appreciate you sir

@@timm1349 congrats! Let me know what you think. Btw…it might sound boomy at first but it will settle in.

This is the axle back.

Thank you. I appreciate the feedback.

I had it professionally blacked out along with the grill.

Non resonated is a little louder than resonated. I went with non resonated at the suggestion of Fast Intention and it ended being perfect. The Q50 is very quiet stock and even with non resonated it still is not that loud, it’s perfect in my opinion. Should have come this way stock.

14” touring non resonated.

Hey, it is a Kranzle 1122tst. I purchased it a couple of years ago. It’s probably over kill but I love it. Works really well. Link below: www.obsessedgarage.com/products/kranzle-k1122tst

@@javtheautoenthusiast6418 Thanks I appreciate the info. Keep up the good videos.

@@bowlingbob4300 thank you.

No, I had my local shop do it. If you have a nice Jack and the tools, it wouldn’t be hard to do by yourself.

For me, it has left a nice natural finish not matte or shiny.

I just bought it leaves an original finish and smells leatherette as if the car was new. My wife even stated the car smells new.

Thank you. Yes, I love the stuff. Easy to use and great results. Didn’t think about using blue shop towels. I might have to give it a shot.

@@javtheautoenthusiast6418 yes they work great and you can get a 6 pack of them for $10 at Walmart. My Lexus is a 2002 model. The leather is in excellent condition but it's a bit hard. After using this product 3 seperate times my leather is much softer. The product really does work. And Ive tried a few different conditioners that have not even come close to these results.

All stock mid pipes and just added the axel back.

@@javtheautoenthusiast6418 thanks

Just the Helmholtz axle back exhaust. Everything else is stock.

Yeah, when purchasing it from Fast Intentions you select your drive train. Not sure if there is a difference in the exhaust layout from RWD though.

Yes, I did.

@@javtheautoenthusiast6418 i like it 👌🏻

Everything is stock other than the Helmholtz.

Congrats! Let me know what you think once you get it installed. Just know that it may be a little loud/boomy sounding at first. Needs to settle in. After about 500 miles the carbon sets in and the sound is much better.

@@javtheautoenthusiast6418 thank you man I sure will comment back 🔥💀

@@javtheautoenthusiast6418 I installed it and man I love it not to crazy not to quiet it’s perfect. Definitely wakes up when you step on it that’s for sure 🔥🔥

It is part number B0100-Q50S2. I bought it used locally from a guy who switched to a different exhaust. You might want to check eBay or there is a q50 Facebook group. Otherwise you can check on the Infiniti site if you want new.

It’s not bad for an axle back but it wasn’t my favorite either. I switched to a full catback exhaust from Fast Intentions which was definitely the better way to go.

Lol. I know what you mean. This was one of my first videos. Learning as I go. Thanks for checking it out though.

Congrats on the QX60! Definitely does not hurt to keep the leather maintained. I apply every three months just to keep the seats cleaned and conditioned.

There is a little drone in the lower rpm’s between 1,200- to just shy of 2,000. You notice it mostly when city driving when at low speeds. But no drone in highway driving.

It is much louder compared to stock. You will definitely notice the difference on startup and when you get on throttle. It is quiet when cruising but wakes up when you get on throttle. I came from the Infiniti Helmholtz Axle back exhaust which was way louder and when I first switched to the Fast Intentions I thought it was too quiet. However, I really like it now. It turned out to be the perfect exhaust for me and what I ultimately was looking for. I would recommend you go non-resonated on the touring muffler which is what I have. Trust me it is a nice setup and not loud at all. It is very tasteful and in my opinion this is how it should have come stock in the Q. Has a very nice tone. I think it would be way too quiet if you went resonated with the touring muffler. If you are planning on adding lower down pipes then go resonated. Or, If you want something a little louder you could go with their 10” sport muffler with the non-resonated x-pipe.

@@javtheautoenthusiast6418 Thanks for the answer good sir, yes I've heard the Helmholtz Axle back and it's way toooo loud, I'm looking for a deep tone and not obnoxiously loud, when you say this is how the Q50 should've sounds from factory I'd assume it's at a very good sound level, but as you mentioned I might get Lower downpipes, so I'm really not sure what do get. If you can post more video clips of the set that would really helpful, Again thank you for your help

@@javtheautoenthusiast6418 thank you man I had my q for a while now and I still have it stock because I don’t what an exhaust that is obnoxiously loud by just cruising. So appreciate the info I’ll be doing that set up.

No drone at all! The FI exhaust is great!

100% Agree with you and it is much nicer as a daily driver. It's present when you want it to be and quiet when just cruising around. I love it.

Hard to say as it could be a combination of factors from the type of towel being used to the type of protection on your vehicle.

This is with the resonators.

Thanks

A local shop did it for me.

Part number is b0100 - Q50S2 I just got mine few days ago installing it today

@@lvl-savage-lvl6659 i dont think thats it.. i feel that he got some downpipes or something

@@moeasadi3449 nah man that’s it he was the one that told me I just installed this today and it sounds good nice growl

@@lvl-savage-lvl6659 congrats bro, how much did it cost you?

@@moeasadi3449 this ran me 800 got it in 1 day others were charging me 715 but I had to wait 4 months.

Thanks for watching and for your feedback. In this video I was giving an update on some things I experienced after first installing the exhaust. I have another video with just sound clips.

Lol. The FI exhaust is perfect for me as well. The Helmholtz was loud especially on a cold start.

i dunno, i have a 14 resonated FI on my g37, it is loud when i start it in the morning on cold start... btw i leave my house at 4am to go to work, poor neighbors..

Thank you! I’m hoping to creat additional content soon. I just haven’t had the time and I have been lazy. Lol.

@@javtheautoenthusiast6418 I know all about lazy lol. I am right there with ya!

I had the chrome vinyl wrapped. I also hated the chrome. Lol. Especially the grill.

The 10 inch will give you a louder sound.