Видео

Just cleaned the filter after a long hard rain and some run off went into the pond. The filters were filthy!

One of my goldfish is white wuth an orange spot on its head too!

Blue pond dye was added to pond

I switched back to using all three filters. Each time I opened the bucket the water was greenish in color.

UPDATE**: The native bees filled 22 tubes that I have saved for next year's hatching in spring.

Please give me your review

Within 5 minutes the foam was gone.

I can even put gravel or other rocks on top to camouflage the patio block.

Bought dye on Amazon: Total Pond-Pond blue. Safe for plants, fish, animals.

The dragonflies and frogs approve.....😁

Those always look tacky, especially when they're not done by a professional designer.

Man I have been searching for WEEKS to figure this out. Thank you so much for this!!!

Dude beautiful setup

Are you on bobistheoilguy ?

Probably time for a stereo upgrade. I'd recommend Crutchfield they been in car and home entertainment business for 40 years now.

Hello. Why use limited slip oil with aditives?

Super helpful… bought the I-wave and wasn’t about to pay the HVAC guys 1k to install. Watching this made it a super easy install 🤙🤘

Did u buy it off the offical site? How long was shipping?

The mud is clay as Mason bees like using clay soil to seal their chambers. Leaf Cutter bees will also use the house but seal the chamber with pieces of leaves. Native bees are much better pollinators then honey bees. Their bodies are fuzzy and hold lots of pollen that they spread from plant to plant.

Thanks for this I'm hoping it's the same on my 06 Avalon Guess I should have a fresh hose ready as well since the rubber is 18 years old 😅

Have used Filter Mags for years. They work...period. Except for purchase price, no downside to them. My UOA iron measurements lowest I've seen in any UOA's from anybody. (Purolator Boss; Pennzoil Ultra; 6,000 intervals)

Thank you for making this!

Cool

This kit was 165.00. Expensive compared to other Amazon cans but spread out over the life of the vehicle it isn't unreasonable.

I put a quart in it and it's not coming out the fill hole. Do you remember how much it should take?

I might be doing this tomorrow, thank you for the video!

It's not like it seems thank you very much it works perfectly with your suggestion

How to fix when the CD function doesn’t even turn on?

You can add new fresh oil to flush it while leaving your car running, and then you won't need to do it again for the next year or so ,😊

4 years later, Thank you for this video 🤝

It worked!! Thanks so much. Had to try 6 times to have it accepted, but your example encouraged me to continue. I am delighted.

Those wheel hubs should be brushed off. Rust will prevent correct seating of the wheel

A bad pcv can throw a P0430 code

Thank you so much! I’ve been having exactly this issue on my 2010 Santa Fe! You saved me a trip to the mechanic!😊

Thank you for actually showing how to replace the bulb. I've been fighting with the connector for 2 hours trying to get this bulb out without breaking it, and dealing with my phone not wanting to connect to the internet, then I get your video to buffer just enough to skip to the part I would need just to find out you didn't show shit.

Crazy thing is i can’t get it back in now! The angle by the dash is crazy

Thank god

Thanks! I changed my valve cover gaskets because of the dreaded oil leak and needed this pointed out.

Thank you, you Zz Man lol. Appreciate it.

Thank you for this. I was searching RUclips to see where the PCV valve is on my 08 Hyundai Santa Fe is. Honestly I would’ve preferred if you did a full video and showed disassembling, changing the valve out, and then reassembling. But at least I know it’s not upfront like the other video I saw for an earlier model Santa Fe.

I wish i could even put in my cd. NO CDs will go in.

Thank you brother man

For about 2 years, the left turn signal was not totally out, maybe 15% of normal light, and flashes very fast, so I was too worried if I got pulled over by a cop. 2010 Hyundai Santa fe. Was searching the Web again today and this video led me in the right direction. I again switched right/left bulbs and sockets until I saw that the brass​/copper​ piece on the ​left socket was 'IN' too much and probably was not making a connection. I didn't have to drill a hole like he did, I used a tiny screwdriver and moved it gently about a fraction of a millimeter outwards (the brass/copper piece). Thanks very much for posting, it didn't cost me anything! Cheers

I just wanted to thank you for posting this. I had replaced both front headlights due to a collision and then experience fast flashing on both the right and left sides. Hazzard worked fine. The issue was with the turn signal bulb socket. I had used the new ones that came with the new head lights. Luckily I kept the old bulb sockets. Once I put the old ones in the normal flashing was fixed.

My 2016 camry, I simply pulled that clip back along with the pillar n reached in with 2 fingers n unclipped it at the base

This is a good video, and thank you for it. But it would have been way more helpful if you had someone hold the camera while you did it from start to finish.

Do you notice any improvement with iwave-r installed?

I changed my alternater put belt back I thought I put it right turn engine on belt ripped..I put a new belt now its loose what you think happen?

Thank you bout broke mine

Well ongoing trouble with my 2015 SE 2.5L. Will crank over when it wants to. This time it cranked over but not always. When I do manage to start it sometimes will die. Got it at auto electric shop. They said it might be the mass air flow sensor or air temperature sensor. But that wouldn’t cause the cranking problem?