Видео

I love youtube

Do you recommend this fujimac 80 for koi pond aerator? I am deciding between this one and a Medo-80bn. My pond is 10,000 gallons 6 feet deep and I'm planning to spread amongst two 9 inch dics diffusers (matala). Located in NC. Among the koi hobbyist everyone knows and trust Medo for longevity, but not many talk about fujimac. But this one you talk about sounds pretty comparable, if not better.

24:20 most important part and he's starts talking like biden. WTF?

Hi, can i use the same diaphragm for the xp80, than for the hp80? Thanks, Good Job!

THANK YOU SIR! CLEAR,THOROUGH, AND CONCISE. I APPRECIATE YOU.

Any videos showing how to rebuild one that has a safety screw?

Replaces my effluent pump, have this model dose timer. Pump is hardwired, and runs when the orange and green led is lit up. Only shuts off when the low water cut off float switches to off not by the timer. Is there a video that goes over possible trouble shooting of this timer? Do I need to reset the timer some how?

how close to the edge of the tank can a riser be?? I thought is should be no closer than 3", is that good??

Amazon , Thanks

After I put the kit in, it runs but no air comes out

Just rebuilt my Clearwater Pump. The orange gasket was not there but it in now. It works great. Bought the kit from Wholesale Septic supply.

Which horse power is good for a residential Septic tank .3 or 1/2 hp and what’s thermally protected means

My Clearwater pump is moving air out of the intake and the out also. I Ordered a kit for my clearwater CS103E. Will be rebuilding the pond aerator tomorrow. Again, GREAT VIDEO!

Great description video.

Thanks buddy !!!

Awesome real-world video! Actually on a used pump. LOL! I am also in South Texas. Shroeder area.

My aerator was off for 2-3 months and I didn’t know it was off. I repaired the aerator and plugged it back up. Minutes afterward the house began to smell badly inside. How long will this last?

Will the primary control float stop the pump from coming on even in override?

1. Does it hurt a grinder pump to never really grind while used in an Effluent application. There's occassional scum floaters in the effluent tank. 2. My effluent tank pump is at 6 or 7ft below street level in the side yard, but pumps efflent to the backyard, uphill with elevation gain of about 25 total feet from pump to drain field and run of 40ft to 50ft tops. I want a pump what's overkill rather than underkill that can't keep up with the dose timer with what's supposed to be pumped. Prefer metal fins/vane. And upper and lower ball bearing bearings. Any suggestions make/model. It's a 120v system

which pump is best for rental business? 4 people in a house?

Adam, Thank You so much for posting this. You are my Savior. The typical white to black kicked my breaker!! I searched the web to find out how to hard wire my float/pump!! Thank Goodness I found you!!

Help!!!!!

Mine has a run/test switch on the side. Tried it and still not working! 😢

When alarms goes off should light still be red

which one is best? fujimac, HiBlow?? Whirlwind?

Just wired up my pump and alarm I’m i required to put in a disconnect?

Ok kit was $59 hiblow oem on amazon. New pump was $265 on amazon. Kit worked great🎉🎉

Thanks for the video. Just what I was looking for. Take Care

Hi. I need to pump some 500 gal per day of barely turbid water from a holding tank for a distance of 400 ft to an elevation of 30-40 feet. Which pump should I use? Jose.

This is eye opening. Thank you for this video. Great information. Do you ship to Canada?

This guy is great

Thanks! Very clear and helpful... appreciate you!

I rebuilt one of these today. Lasted maybe 4 years 2 months before the alarm went off but I’ve noticed for a long while it wasn’t as loud as it used to be and when I was standing by the aeration chamber of my septic tank I didn’t hear the thumping sound like I used to when it was new and for a couple of years. I hear the thumping again after the rebuild but I swear standing by the aerator it’s no where near as loud as it used to be with the humming sound. Any reason it wouldn’t hum as loud now after I changed out the two diaphragms? I didn’t buy new chamber blocks though. Does not changing out the chamber blocks affect the humming level noise?

Your videos are very useful and informative! Would you please consider making one with all the bells and whistles???

I’m thinking about buying the hp-60 instead of the hp-80,will it supply enough air to my septic system? I’m wanting the 60 because it uses less wattage.

What’s the brand of the 2nd one from the right? The one next to the hiflow

What if the sprinkler doesn't come on

Great video. I just replace my pump diaphragms but the pump still wasn't working. Watched your video and went and reset the switch and the pump works perfectly. Saved me having to buy a new pump for $400! Well done.

I have a question whether the hiblow hp80 membrane fits the hiblow xp80

The solution for a one tank system is “Septic Genie”. They work with one tank system. Been around about 20 years. Cost about $2000.

Mine went out and i rebuilt it using a kit. What no one told me was the "screw" on top was a breaker and i had to align the slot with the arrow. Once I did that it worked. Only took about 20 minutes.

Would bad diaphragms cause the micro switch to throw causing the unit to shut down ??? As if the magnet goes too far in one direction.... thanks

I am a septic newbie and this is so helpful and explains what is likely wrong with our system. Now I know how to have an intelligent conversation with the repair guy tomorrow. Thank you!!

So, good information, however, I as a designer and an operator would say that the panel itself is "lacking" as it has No pump cycle counter, no pump elapsed time meter, all of which provide excellent diagnostic information for the service provider. I also prefer a panel that the Hand / Off / Automatic switch is INSIDE the box so it cannot be "accidentally" tripped to OFF or HAND without opening the box. AND Silicone filled wire Nuts !!! too many DIY's use regular wire nuts that are NOT designed to be used outdoors or in a wet environment!

Serial 0811sch 220v how to connect terminal block bottom side

You need to use blue lock tite to hold the diagram nuts or or they will come of in about a week.

mine is coming on every 1 and fifty minutes not matter what I set the dials at...shutting the breakers off before i set it,,,is it broke? its 20 years old...

Maybe I missed it but model and brand you are working on in the video?

Any links to the safety switch and diaphragm kits? I have that exact unit.

Great video and it is obvious that you are a seasoned journeyman. Just wish your camera person was the same. lol 🤣