- Видео 33
- Просмотров 44 788
ReBuild It - Classic and Modern Cars
Нидерланды
Добавлен 17 мар 2020
Hi,
This channel is a place I want to share the restauration and modification of classic and modern cars.
The plan is to first get the cars back into good condition and then add modern add-ons.
Have fun and enjoy the content.
This channel is a place I want to share the restauration and modification of classic and modern cars.
The plan is to first get the cars back into good condition and then add modern add-ons.
Have fun and enjoy the content.
B1.31 - BMW E24 Project [Update time]
So in this episode we are giving an update of the project. From suspension till the wiring and layout in the cabin.
BMW E24 - 633CSI from 1978 Project:
N55 engine with BMW F20 135i wiring loom to make the car up to date.
When it comes to the electrical system I'm planning on making it a "modern car";
- Added parking sensors
- Adding reverse camera
- Adding prof audio system
- N55 drive train with ZF8HP
- Upgrading the AC system
- F20 body and other controls
The car will be a project when it's finished I will be enjoy driving it in the weekends and during road trips.
Like and subscribe to the channel more content;
Music:
Music track: Make a Stand by Filo Starquez
Source: freetouse.com/music
Free Vlog Mu...
BMW E24 - 633CSI from 1978 Project:
N55 engine with BMW F20 135i wiring loom to make the car up to date.
When it comes to the electrical system I'm planning on making it a "modern car";
- Added parking sensors
- Adding reverse camera
- Adding prof audio system
- N55 drive train with ZF8HP
- Upgrading the AC system
- F20 body and other controls
The car will be a project when it's finished I will be enjoy driving it in the weekends and during road trips.
Like and subscribe to the channel more content;
Music:
Music track: Make a Stand by Filo Starquez
Source: freetouse.com/music
Free Vlog Mu...
Просмотров: 496
Видео
B1.30 - BMW E24 Project [Will it even Crank?]
Просмотров 679Год назад
So in this episode we are reinstalling the engine with all the wiring attached and the modules connected. This way we can see if all the wiring and modules are at least satisfied for turning over the engine. Next steps would be focus on the fuel supply towards the engine. This was already a big motivation so let's continue to make some progress. BMW E24 - 633CSI from 1978 Project: N55 engine wi...
B1.29 - BMW E24 Project [Long-overdue update!!]
Просмотров 7342 года назад
After not posting for 125 days here an update! I did not record a lot of the progress due to less interesting to watch content. Therefore this short update and hope to drop another video every month as wiring goes in a mostly finishing up the body. So in this episode a front to back update on the car and some BMW F20 wiring repairs. Next steps would be to mount brake booster and find a way to c...
B1.28 - BMW E24 Project [Making it a roller again]
Просмотров 5032 года назад
After working on other project back at the E24. In this episode we manage to put the rear drive shafts in and put some wheels on the rear. Then drop the car onto the ground after some years and after check how the F21 steering column fits the E24 chassis and dashboard. BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will be stripped all the way. N55 engine will be inst...
B1.27 - BMW E24 Project [X-mas cooking, Test fitting coolers and rear suspension work]
Просмотров 5982 года назад
Xmas edition with some special Xmas cooking (just 2 ingredients ) A lot of research and ordering parts to get going on the next steps. Unfortently the car is still not sitting on wheels but the parts are ordered! In this episode we created room for the N55 coolers and checked if it would all fit into the E24 engine bay. Also started to figure out the F20 wiring harness and repairing it. Tempora...
B1.26 - BMW E24 Project [Engine and Gearbox in] - WE ARE BACK
Просмотров 9323 года назад
WE ARE BACK! HOLIDAY SESSION IS OVER! In this episode we start cutting out the tunnel and making sure the gearbox and engine fit into the car. The front subframe and suspension with be mounted into it's place and we start looking into mounting up the E34 2.93 diff. BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will be stripped all the way. N55 engine will be installe...
B1.25 - BMW E24 Project [Testfitting the Engine, Will it Fit?]
Просмотров 5403 года назад
In this episode work continues on the front subframe. The engine arrived and had to install N54 engine brackets to clear the steering rack input shaft. This also makes it easier to mount it to the E46 subframe with the originale bushings. As the project is taking some turns it's hard to create content that is nice to watch. A lot of research and thinking is happening behind the scenes. BMW E24 ...
B1.24 - BMW E24 Project [Preparing Front Suspension]
Просмотров 7783 года назад
In this episode working on the front subframe. Trying out some different weelhubs/king pins and then preparing the subframe so it's adjustable for when the enigne comes. Sit tight the engine arrives soon. BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will be stripped all the way. Engine will be rebuild and improved where possible. Still thinking about the Turbo setup...
B1.23 - BMW E24 Project [New Engine and Gearbox]
Просмотров 6273 года назад
Hereby a short update video with no intro and outro on the new engine. Can you guess the BMW engine and are you as excited as I am?! More progress on the suspension and body repairs soon! Like and subscribe to the channel more content; Weekly updates (Wednesday 12:00 CET)
B1.22 - BMW E24 Project [Testfitting E34 Rear Subframe]
Просмотров 1,1 тыс.3 года назад
In this episode working on getting the E34 rear subframe to fit onto the E12 based E24 and also getting started on the front suspension by dremeling out the front mounting points for the E34 coilovers. Next we will work on getting the E46 front subframe to fit with the E34 coilovers. BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will be stripped all the way. Engine w...
B1.21 - BMW E24 Project [Floor repair and engine update]
Просмотров 6673 года назад
In this episode last floor parts and jacking points get welded in and an update on the engine.. No good news tho.. BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will be stripped all the way. Engine will be rebuild and improved where possible. Still thinking about the Turbo setup but need to dig more into that for this engine. When it comes to the electrical system I'...
B1.20 - BMW E24 Project [Undercoating removed]
Просмотров 9933 года назад
In this episode an update on the body repair; welding in new floor pan and marking the rusted spots for repairs. Are you also intrested in also buying BMW replacement panels for you classic? I have ordered mine at ValcasGarage Have a look at: www.valcasgarage.com/ or on the facebook page: valcasgarage BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will ...
B1.19 - BMW E24 Project [Body repair update]
Просмотров 9583 года назад
In this episode an update on the body repair with some new body panels. Are you also intrested in also buying BMW replacement panels for you classic? I have ordered mine at ValcasGarage Have a look at: www.valcasgarage.com/ or on the facebook page: valcasgarage BMW E24 - 633CSI from 1978 Project: I have some big plans for it. The car will be stripped all the way. Engine will be reb...
B1.18 - BMW E24 Project [More welding, 3D printing and new parts]
Просмотров 6763 года назад
Again I am sorry for the delay on this video but I have some other priorities and stripping the undercoating is time consuming... In this episode we are welding in more fresh metal. And 3D printing some concepts for reinforcement plates for the rear subframe. Next we do more body prep work and start welding in new body panels/repair pieces. BMW E24 - 633CSI from 1978 Project: I have some big pl...
B1.17 - BMW E24 Project [Welding in some fresh metal]
Просмотров 1 тыс.3 года назад
B1.17 - BMW E24 Project [Welding in some fresh metal]
B1.16 - BMW E24 Project [Body Prep] - There's no way back now
Просмотров 1,9 тыс.3 года назад
B1.16 - BMW E24 Project [Body Prep] - There's no way back now
B1.15 - BMW E24 Project [The Shark lost his nose!!!]
Просмотров 8204 года назад
B1.15 - BMW E24 Project [The Shark lost his nose!!!]
B1.14 - BMW E24 Project [Disassembly of subframe]
Просмотров 5384 года назад
B1.14 - BMW E24 Project [Disassembly of subframe]
B1.13 - BMW E24 Project [Stripping The Engine] - !!!! What? 6 holes inside the engine? !!!
Просмотров 5154 года назад
B1.13 - BMW E24 Project [Stripping The Engine] - !!!! What? 6 holes inside the engine? !!!
B1.12 - BMW E24 Project [Prep engine for inspection]
Просмотров 6694 года назад
B1.12 - BMW E24 Project [Prep engine for inspection]
B1.11 - BMW E24 Project [Removing subframe + Project Action plan]
Просмотров 1,2 тыс.4 года назад
B1.11 - BMW E24 Project [Removing subframe Project Action plan]
B1.10 - BMW E24 Project [Underbody inspection + Engine out]
Просмотров 1,3 тыс.4 года назад
B1.10 - BMW E24 Project [Underbody inspection Engine out]
B1.9 - BMW E24 Project [Removing Hood + External Engine Parts]
Просмотров 7924 года назад
B1.9 - BMW E24 Project [Removing Hood External Engine Parts]
B1.8 - BMW E24 Project [Windshield trim + Shop upgrade]
Просмотров 1,3 тыс.4 года назад
B1.8 - BMW E24 Project [Windshield trim Shop upgrade]
B1.7 - BMW E24 Project [Last interior parts + E24vE63 functions]
Просмотров 1,2 тыс.4 года назад
B1.7 - BMW E24 Project [Last interior parts E24vE63 functions]
B1.6 - BMW E24 Project [Rear bumper and trunk trim]
Просмотров 2,1 тыс.4 года назад
B1.6 - BMW E24 Project [Rear bumper and trunk trim]
B1.5 - BMW E24 Project [Remove Body Trim and Panels]
Просмотров 5 тыс.4 года назад
B1.5 - BMW E24 Project [Remove Body Trim and Panels]
B1.4 - BMW E24 Project [Dashboard and Controls out]
Просмотров 8 тыс.4 года назад
B1.4 - BMW E24 Project [Dashboard and Controls out]
B1.3 - BMW E24 Project [Seat and Lower Interior out]
Просмотров 4 тыс.4 года назад
B1.3 - BMW E24 Project [Seat and Lower Interior out]
Nie Juan
👍👍👍👍👍
Nice informative video, keep up the good work.
What a wonderful project and some research you have done. You actually designed a car. Will it be a street car of circuit verdien? Good luck with your project and keep us informed of the progress.
😮wouaaah good job!!!! Salut de france👍
lol i just began to work on my e24 after a year of sitting i get it bro
Just bought an 83 633csi. Keep the content coming
I need this my E24 wiring is all over the place 😢
I enjoy your content. I have owned a 1985 M635csi I imported to USA when new. I used for many years as my daily driver. Now due to age, restoration of certain things is required and your videos are helpful.
Have you made any progress on your car?
This is great stuff thank you 👍
👍👍👍
Nice content, Hard working.
Could you enlighten what offset the holes in the big Are? E34 vs e28? 25mm either way?
I think old Honda pickup tricks used similar motor different head but early rangerover motors were identical as I bought some for same reasons as you
Wow this is next level engineering 😄. Have you also considered using the E28 front subframe with E34 shocktowers? Read somewhere that should also fit the E12 type chassis with some modification.
Guess i know the answer already lol you didnt want an old style steering box most likely 😄
Thanks! Yes I have seen that as well. I am using E46 front subframe and suspension parts 👍
By any chance do you have a e28 trunk interior removal , much appreciated
Aaah sorry no I don't have that. Maybe have a look into other E24 removal projects as the 2nd and 3rd gen share the same chassis and design might be the same.
Here is the work!!!👍👍👍🔥🔥🔥
💪💪💪💪💪💪✊ I have dreamed of such a project for a long time, but in Ukraine e24 is a very rare car, and you need to have a reserve of funds for such a project.
Keep up the good work this thing will be badass
Awesome job,
Subscribed. Fantastic job... 👍👌N54 into E24 wow👍👌Hope that ECU wiring and instrument cluster will work smoothly for you as everything else. Watched all yours E24 videos and your working precision on E24 (amazing job on wiring diagram schematics/plans) is absolutely amazing... I Can't wait for your next video, wish you all the best. 🇮🇪 👌👍
Hi is there a way to remove the carpet without removing completely the center console? Thanks!
Hi, I don't think it could unless you want to cut away parts of the carpet. So I would to recommend that.
Are these E46 CSL wheels?
Hi, these are replica from E46 CLS wheels. 19" but I want to get 18" and different design. Just had these still laying around.
Congratulations on your useful work! Unfortunately, I was stupid and I pulled out the cable harness without being able to put everything back on. Do you have an electrical drawing? I only found it for a second series. Thanks to Csaba
Hi Casaba, I did not continue to work on this anymore as my project took another turn. But maybe if you want I can help out somewhere with my drawing.
Bruut project! Ben benieuwd hoe dat er uit zal zien met een F21 interieur..
Just notice this Video and amazing progress! Can you clarify me the Benefit of the E34 Rear Subframe on the E24?
Hi Shark E24, the big benefit is the diff options and strength as of different way of mounting the subframe. Also now I have bigger wheel hubs and brake options and bit more modern ABS systems to convert into F serie canbus.
Was wondering what you did with the diff mount. Is this still the original E12 type? Which is known to sometimes tear out on high horsepower builds. Looked like there's a plate on it but the camera passed it too fast for me to clearly see it 😅. Thx.
Sorry for late reply! This is super interesting and would love to try to do this with mine also cause it truly would benefit In many ways on the rear suspension. And I have a spare E34 subframe so I’m Very tempted to do this. Thanks for clarifying this. Hoping to see it finish and new updates of it 💪🏻 Cheers 🍻
It's been a while since we've seen an update. How is the car progressing?
Hi Henry, sorry I have been very busy with other project. Just released a new video this week. Have a look :) hoping on getting more time on the E24 project coming period.
Amazing 🤩
What you think about VanVezel Rear fender? How does it fit?
They fit up pretty well. Should have maybe not cut it untill the "line" of the side of the car but let's say we all learn.
hi, I'm also restoring my E24 right now. Can you tell me where you take new seals between the chassis and the back lights? BMW has no parts left..and also the aluminium edging on the rain-trim?
Hi David, yes I notice that as well. Will be a (another) challenge to make those but we will manage. Else scrap parts it will be.. if those are still around.
This is a Series 1 car on the E12 platform . Harder to get parts than the Series 2 E24 version.
Yes indeed. so I am happy I got a lot of spares with the car and now converting a lot of the things to modern platform (E34,E34 and F20)
Can't read the action plan. Light color not good on my phone. But glad to watch the rear removal
cool videos... I am considering an engine replacement in my E24 and was wondering if you think it is possible to remove the engine from the top instead of dropping it out.
It is, but you better have a good engine crane. If you are planning to do engine repairs, I'd start by removing cylinder head while it's still in car - it'll be easier to remove.
Thanks for this! It was a happy surprise to see you have an E12 based car. Not enough documentation for our early E24s.
Excellent video and awesome project. Look forward to seeing it come together.
You broke the cluster screen.... next time remove steering column first
Jep, unfortunately that happened. Luckly I am going for a new design. First the F2x cluster and later maybe redesigned E24 cluster👍🏻
Shyte Music
There is a mistake on this video as the bolts holding the seat frame to the floor are 13 mm and the bolts holding the seat to the rails are 10 mm NOT the other way round as in this video
Thanks for your comment and yes I think I mixed up the note there ;)
@@ReBuildItClassicandModernCars The reason i mentioned it is because i recently bought a 1977 633csi and your videos are a godsend for which i thank you so much as without them i would be up the proverbial creek without a paddle and i appreciate you getting back to me and keep making those videos.
Good job 👍👍
Wow!, respect hoor hoe ver je hiermee gaat!
👏
Can't wait for the next episode! When it's finished I'll see you at the shark meetings 😁
Aaah yeah let's see when I can attend the first with this car. Please also feel free to share any and I will still come by BMW ;)
Love the project, the E24 is one of the most beautiful BMWs ever build and having such a classic with added modern parts surely improves it by a lot.
Keep up the good work! Excited to see it! I’m getting one next week :D
I seriously love watching this build. It’s all custom built. You’re going to have a one of a kind e24 🤙🏽
Bud.. you should be working for BMW what a nice job
I was wondering when someone would n54 swap a shark
I’m loving this build. Always look forward to seeing the progress. You’re killing it 🤙🏽
Thanks voor the love! I am enjoying creating a nice vlogbook for later and sharing the build. Enjoy
Mijn hoed af voor de perfectie om te restaureren.
Hi Pierre, bedankt! zo'n auto verdient gewoon beetje liefde he. En het is voor mij een heerlijke hobby om te ontspannen en leer ook veel van wat hoeken en draaipunten van het onderstel. Ik hoop er straks iets van 15 jaar op vooruit te gaan betreft onderstel en motor.