Видео

I can’t stand flat water and I don’t like soda drinks.. but I like the bubbles so bubbly water is fantastic

The packaging job is next level, with wood inserts. Got mine assembled and bolted down. Very solid. Added vibration sensor and door sensor connected to Apple HomeKit. As well as a rechargeable motion activated light from Amazon. I opted to cut out the baseboard around the cabinet so that it would sit flush to the wall in the closet. Mine has the new keypad with biometrics. It’s a nice touch.

I really like your videos. Clear and easy to follow. Been having fun with my Lee Load All ll and AA hulls like yours. Found that some load combos leave a horizontal seam where wad meets inner shotcup. Learning my way through this! Will look at the slugs in time when I find the right fixins.

Why not just use at least 1 of the suggestions like windex

One thing I realized over the last 5 years is that the same tools you use to work on your vehicle or do home repairs, you can use on your firearms. Too many people believe that you have to buy special hand tools from firearms focused brands to be able to work on firearms you own. I was reminded of this when you said you specifically purchased a set of ring pliers from Warfighter Tactical. Obviously, any set of ring pliers would have gotten the job done that can be purchased from Home Depot, Lowes, or Ace Hardware.

Great product 👌🏼thank you❤

👌🏼👌🏼👌🏼👌🏼

I'm going to leave the coating on mine until I get ready to use it. Then I'll clean it off with lacquer thinner (I just have that at hand and it dissolves grease) and apply some Johnson wax to it to keep it from rusting. Wax has the added benefit of repelling dust. I'm not even going to bother with setting up the laser, just bring the bit down and see where it hits the wood, then adjust it as necessary till it lines up where I want it. My garage isn't heated (unless I'm working in it) or insulated so I doubt any batteries would last very long anyhow.

I have to buy one of this 🤌🏻🤌🏻

Wow👌🏼

Now there 300+ almost damn near 400

I have a question. I just bought a ADM ar-15. It says it’s a 10 position buffer. But didn’t see any weights or anything to adjust. Just want to learn about it before I buy a suppressor. Their website doesn’t say much.

I hate it when people crap on 308. The Federal Premium 175gr Sierra Matchking is a fantastic cartridge and pairs well with the 1:8 twist of the MRAD.

Great video. Any other issues that I should be aware of besides the lug nuts on the Ford Raptor? I’m thinking of buying a 2024. Thanks!

Thanks bro before watching the vid was struggling for 20 minutes. But u helped me get it on in 5.

I noticed the costco prime new york strip is a big difference but not as much with the ribeye.

Spray some hairspray in the inside of the grip and slide it on. Trust me, you will thank me later.

Been struggling with this for an hour now and finally decided to check the tubes. Thank you so much for posting this. I would have never thought the hair dryer would allow the material to stretch that much…but it worked with a lot of pulling and huffing and puffing. Thank you for putting this together and sharing!!! Appreciate your time.

Where did you get your 50ae ar rifle?

What’s the fixture you’re using?

I need the control / display board for this unit Part # G1202KXT it is unfindable lol I have been looking for weeks the double door unit

I just ordered some of this after watching your video. Thanks buddy

Odin makes some great stuff. I have one of their .223 Wylde barrels, tube and forend.

this is an excellent! thank you for the link def just picked up.

Why not just get an adjustable gas block?

I love the minus connectors. They came stock in my 17L, 24, and 34. I put one in my 17C, 19 gen 4, 19gen5, 40,41, 44, and 25. I don't why more people don't do this instead of paying loads of money for a new trigger

Got on my canik da in like 2 minutes

why did you wet it?

What size diameter is the cup holder? My wife and I have water bottles that measure 3 3/8 inch wide? Thank you!

Great review! Thanks for sharing. 👍

Hey guys i have a question. I consider to buy an lmt. What is the barrel life of lmt rifles 556? how many rounds can i fire before i have to change the barrel? Can anybody help?

Not sure if you still use your channel but is this vice able to hold an AR so you can level in and install a scope/dot. Not shoot from it but so long as I can clean easily and have it hold my firearm level I'd be happy. Thanks in advance!

Can you provide a link to the snap ring pliers that you show in the video or can you describe the type of snap ring pliers that is needed. I know there are different types of snap ring pliers that will only work up to a specific size in mm. Some work to expand and some work to compress.

Couldn't get them to connect to campground wifi. Brought home ans quit working after two years.

If you get the Magpul base plate extension it will expand the grip

How about the ever trusty stand by most folks have under their bed, KY jelly. It’s water based and hypoallergenic. I think it’s better than using windex with ammonia. Petroleum based lubricants are no no since they won’t dry out. You grip will be moving.

The shovelnose is perfection with a Riflespeed gas block on 16" mid length barrel. Looks awesome, and protects the adjustment wheel on the gas block.

Have you liked the Annex brand plate so far? Great video!

I just put one on and I as wondering about the hump

Replace the plastic trigger housing with an A&S enhanced trigger guard housing, which is made of aluminum and is shaped to make loading the shotgun faster and more smoothly.

Look all you have to do is spray the gun handle with winded and the inside of the grip slides right on. Let it sit for a few minutes done!

I see you used pure lead to cast your slugs. But then why would you water drop them to make them harder? Shotgun slugs should be soft pure lead.

It’s the best mineral water why because low sodium very good if you have high blood pressure 👍🏾

William Shakespeare was here ❤

No thanks Part of the Nestle Group who support Israel. To bad , great product. Here comes another Fatwa !

Dude, I appreciate the video. I was worried I was doing it wrong and was going to break something. I did figure out it was easier if I soak them in hot water first, if that helps anybody.

So bought this for my Mac running Sonoma on Intel Mac. I run a two 27 inch and a 34 inch ultrawide. One of the hdmi ports worked on the dock the second wouldn’t work until I realized you had to download software from j5create issue resolved I thought. Nope. Then I plugged it in to my computer third monitors lights up then goes black. Laptop detects the dock but no picture black screen ok. After research I found out I had to enable screen recording. Ok so I did but nothing in the manual or answered online said otherwise ok. Once I did that then unplugged the hdmi from the dock and replug back in booted up. Fixed right nope. Third display would let me drag a window to it then it would freeze and lock up. And when it was usable if at all the curser was so laggy and not lined up at all so when I click it would click way at the top screen when my curser was half way down the page oh and forget the third monitor actually being usable I was hoping that the hdmi was usable nope not even close it’s basically a expensive one port usb hub with 100w power pass through. Second hdmi runs off an app on Mac and windows known as usb video adaptor and isn’t a true hdmi. Basically is a single hdmi port usb hub with 100w power delivery. Don’t buy the second hdmi port runs off an app that is crazy laggy on Mac and windows. Freeze the computer and locks it up. And worst you have to have screen recording enabled and yes’s screen recording in Mac runs while second hdmi port is used recoding and eating all your hard drive space and cpu and memory in seconds while not being used the screen recorder flags windows or Mac that storage is full and ramps up fans like crazy on laptop due to over heating. This intern freezes the laptop or desktop locking it up once unplugged the computer goes back to normal again. Again it’s usable works good if your using one hdmi port and the three usb ports and the power pass through to charge a MacBook. Just understand it’s a 1 port hdmi dock the second port runs off an app and usb A controller not c on the docks motherboard sucks I was hoping to get away with only using one cable to my MacBook don’t buy. Over all if you need three extra usb ports and a second monitor then by all means give it a go but for a product to have two hdmi and only one be usable and for me to have to enable screen recording and have it running the whole time the monitors on is a big no go for me. Who knows what data or things there getting off my computer from screen recording my screen. For what it’s intended for and the second hdmi port being unusable that makes it’s a no go for me so for that I give it a 1 star rating.

sights a re removed from left to right, installed the opposite

I have this gun and the creep is bad.

Wanted to see the gas tube, looks clean