Видео

good fun!

These drones are great fun. Practicing aircraft formations. The camera protector and wind tips help protect the camera and battery ejection.... mostly they look good and help identify each other's drone.

where did you get the little wing attachments

did you assemble your qdx yourself? looking at ordering one but the wait looks to be 6 months and the assembly looks to be a little over my soldering skillset

I have a flex sdr and 2 other sdr type radios and several ubitx txrx rigs SBITX: Overall it worked very well. I had few issues and worked many many contacts - mostly FT8 - 24/7 The ssb mic supplied is not good. I had to change the cartridges for a more sensitive one and then it was fine. My original main goal was to test it for Digital modes and run ssb remote via a web browser .. Unfortunately there is no TX ssb audio available , they are still working on that feature. The 7 inch screen is ok but to small to run most external digital pgms like wsjtx etc , so an external monitor was used. It does remote via browser for Dgital modes fine. When the software is modified I will likely purchase another Board only (cheaper), so i can mount into my 3d printed case Joe VE1BWV

Very cool! What software tools are you using to display all of that information?

Just started with the chat.openai.com. This stuff is amazing. I remember spending days and sometimes weeks trying to figure out code. Now just a simple statement and then keep telling it to add new features to the first code .. I also use Grammarly ai... Makes once look like a english master. One word to change tone - etc friendly, or confident and it rewites it completely.... Age is 72 is got to keep my brain active lol..

Hi Joe looks cool. My son is getting me into AI help for code writing as well.

Very nice build

Interesting....thanks for the tip on Mouse W/O Borders. I wish it would work across some Linux/Pi machines I have, but still very useful.

I haven't tried, but doesn't SDR Radio Console allow up to 32 receivers (within the 2 MHz bandwidth)?

Pretty cool. I don't have the land for the antennas for ALL of the digi modes I'd like to do...simultaneously, 24/7/365. ...then we can throw in some other digi modes OUTSIDE the ham bands to receive like WEFAX.

Excellent VE9TN

looks like you have a nice stand that leans the unit back, is that 3d design published somewhere?

SOLD

Very nice video Joe. Thank you! Do you run the sBitx into an external amp because you are afraid of damaging the sBitx finals at a higher power with the high duty cycle of FT8? I know my sBitx gets way to warm after just a few QSOs at just 15 watts.

Hi ! Very informative, useful information. I’m waiting for delivery of mine. Can you please describe how the additional apps such as grid tracker are installed. Thanks.

Excellent video, fun to watch. Do you start to run out of memory after installing the extra software? The grid tracker and WSTX-Z, do they take up a lot of space?

Very cool

tnx and 73

Great topic, but Your hand held camera makes me dizzy and the whole first intro is out of focus and so much of your video is out of focus too, I would recommend that you put your camera on a tripod and re-shoot a new video. I don't want to throw water on your production but I want to help you to make a better and more watchable show.

DETAILS on how I did it. SBITX WITH WSJT-Z (EXPERIMENT WITH A SPARE BACKUP SD CARD) 1. Download WSJTZ ------ sourceforge.net/projects/wsjt-z/ ----- use the pi armhf.deb version 2. Open a terminal on the sbitx 3. Enter sudo upgrade ------------------------------------------------wsjtz-------------------------------------------------------------- 4. Enter - sudo dpkg -i wsjtz_2.3.0.81_armhf.deb (latest version at this time) 5. Enter apt-get install.git -----------------------------------------------hamlib------------------------------------------------------------ 6. Download hamlib-4.5.5 - hamlib-4.5.5.tar.gz 7. Extract hamlib 8. cd /Downloads/Hamlib-4.5.5 9. ./bootstrap 10. ./configure 11. Make -- takes a while 12. sudo make install -- takes a while REBOOT Sbitx radio

Current drain comparison for large display vs standard?

I got a similar problem with engine #3 :(

ρгό𝔪σŞｍ

Need to move the antenna...

Outstanding functionality with low cost components. The hackable nature of this hardware and software with modern technology is the part of ham radio that really excites me as a new operator. Don't understand why this isn't a more popular build. I will be trying something like this with the current 1.6 and Nextion display. Another idea to take it to the next level would be to integrate something like the APM2 DSP module and program it with Sigma Studio to have audio compression and EQ for first class audio. KI6UML

Very nice. Which is the nextion firmware used in display in video?

Same thing happened to me on same esc. Must be common. Any videos on the fix or did you buy a new board?

The recording is done with a PowePlay Recorder.. Does a much better job than recording with my Fatshark HD3 goggles

Just finished modifying my Tiny hawk 3.. Added a new headlight - a must when doing inside line of sight. TBS Crossfire - no worry about controller range now. and a Caddix 1200 Turbo micro F2 camera - much better than nano 4 The eye's are just for some personality. Flight time with a 1S GNB 660 battery doing some racing around is around 4.5 min with battery at 3.6v or 5.5 to 6 mins at 3.20v Just need to do a vtx antenna mod next

oh wow, so you using a nuts/bolt storage case with 2 sides for your projects! What a freaking awesome idea!! I will look at those storage in a total different way when I go to homedepot next time! Thanks!

Can it stream video to iphone or ipad? I have it working on the big screen but don't know how to stream to other device through raspberry pi's wifi.

Awesome project! Planning on doing something similar.

Hi Joe, i am getting the same results, very pleased with this softwars, waiting for Android release of DigiView then will have more options when in the field.

Was Trying to run the system for along time to see if it would hang up or degrade....Rock Solid! I let it sit, then moved the camera around then let it sit , and every time it worked exactly the same from beginning to end... The Pi4bB 4gig mem is running the Cosomo streamer software. It provides the interface to the DJI goggle usb connector to the Pi4 usb connector. The Pi serves also serves as a video streamer, Wlan, and Access Point.. Also provides recording. So basically, you can view video locally or over the internet , and also via direct hdmi output from the Pi--low latency and also view via Windows, Phones and Tablets... Great Software!

my project is 8g with 256gb fast SS drive. Nice case also. Still waiting for the case. www.ebay.com/itm/174499077337

Cool functions... but the colors...!!!

How much would you charge to print me one sir?

Yes it works with the CEC firmware, setting the baud rate to 38400, emulating the Yaesu 817

6

What a headfuck trying to get the "Correct" firmware. It's a bloody nightmare. My display will be f@##in hard.

Hi Joe Thank you for this excellent video. Can I get the filter diagrams. I received my ubitx in February 2020. I have so far no suitable reception except a lot of loud noise (probably due to the lack of AGC) and an unbearable sizzling sound over the entire 20 and 40 meter band without the possibility of hearing the real signals while the rest of the other bands I receive them in excellent conditions. 73's! from TOUFIK / 7X2DE

Joe, I'm amazed that your vid has such low views and likes. Even though we've moved on to V6, your presentation is still very instructive and germane. Go figure? My plan is to replace the V6 display with a 3.2" Nextion and add a plug for my 7" RPi4 display. The RPi4 is currently connected to my VizioTV. I'll move the 7" display from Idle/RPi4/uBITx on any whim that hits me. Thank the Good Lord for all these HiTech Toys that provide so much play time and self improvement.....

Display looks great but the quality of the rest of the build lets it down badly.