Видео

Thanks for the video. It had been years since I was in one of these and was thinking the steer pulled in forward, and I was thinking the mains pulled back like mosquito legs, but I had to see it for clarification. Thanks again!

Super nice Mooney. You have really made this plane into a jewel sir….

Very nice

... Buddy, you need to learn how to use a tape

Hi sir. How much you selling for?

This Dr. is amazing and love what she stands for! She did my hysterectomy and honestly had no pain after!

Outstanding video!

part 2? this is great stuff

it feels so wrong seeing a cesana with retractable gears

Una delle migliori fuoristrada prodotte da LandRover…se non la migliore

Bruh be dangling like ma balls innit

Well that settlies it need one to move a jet ski around

Did you make a part 2?

Why tow in reverse? Could you use a rear hitch for long pulls, then flip around for pushing... Seems like a possibility of tensioner damage doing it this way unless you have the rear engine version. Either version you'll want to add an oil cooler with thermostatically controlled fan as these engines have a tendency to overheat their oil under high loads or slow speeds.

You’re 400 degree CHT warning, do you have surefly?

A drawer for your Colt 1911?

R1S owner here, also in blue, love the color -- my phone charger works fine while I'm driving... perhaps I have an more recent model or something? (iphone 11 pro)

The number one problem IMO is the door handles. They stick out when unlocked, no secret when's it's unlocked. That design is horrible, cheap, and it looks awkward. Love the R1S though.

I love it. I think the problem with the turning comes from the direct drive axle in the rear. Im not aware of anyone doing this but it should be possible to modify a lawn mower differential to fit and replace the stock axle.

Thanks for the great video Evan, I appreciate the conversation because it adds more context. Couple questions: 1. Regarding the relay; did you use it because you were planning to add a third horn? I was thinking that, if the Rivian had two originally, a relay wouldn’t be necessary. 2. Does the relay add a delay to the second and third horns? I sort of hear the clown horn go before the other ones. 3. I doubt there is any noticeable difference but do you feel that your placement of the horns would make their sound be dampened by the frunk’s container? 4. Did you set the Rivian into any mode before working on it? Idk if it should be in “service mode” or else for safety purposes.

Didn't even realize the SUV version was out as I haven't seen one IRL yet. I see the pickups here & there - which is great. What do you mean the OEM wireless charger didn't work? It was, by design, not supplying power to the charger when the vehicle is in motion or your phone would just fall off so it didn't matter either way?

Does it have a security camera system similar to Tesla's? Does the heated steering wheel warm the entire wheel or just areas, like the 3 and 9 o'clock positions?

You've got to stop saying A-a-a all the time.

Outstanding video! I have found that the factory charger only works with my iPhone 15 pro (with a cover) if I lay it parallel to the dash, rather than perpendicular. This should not be the case, but I just wanted to pass this along to those who want to use the factory charger. Keep up the videos Evan!

sorry, just too long. Detail is good, but too much babble. Thanks for taking the time.

No thanks. I stop watching as long as you mention the Chinese horn.

found it, thank you. Although it could definitely fit in a 20x20 garage, I have to agree with the other comment. If you have about 2 feet behind the R1S, then you'd only have 1 foot left to spare in the front, since 2 feet + ~17 feet for the length of the Rivian would give you 19 feet, leaving you with only a little over 1 foot in front of the Rivian. Thanks though anyway. Pretty cool that the back opens even with the limited space in the back.

Thank you this is useful. You have more space left in the front compared to the back, so your garage depth has to be more than 20 foot. 201” (rivian length) + 23” (space in the back) = 18.5 foot.

Can you please link us to the cup holder system you have in the lower console?

Hope you enjoy your R1S. Fellow owner here, and I love mine. One of Rivian's best unexpected (for me) features (among many) are the regular OTA updates to the software that controls many aspects of its performance. Ride quality was initially one of my few dislikes about the vehicle, and the OTAs have made regular improvements on that. So much so, that it's approaching excellent status imo. Enjoy, and may it serve you as well as your RR apparently did.

This video and the horn video you did later are both spot on. Seeing the engineering that went into Rivian’s charger mat - that thing has to cost them $1,000 and you’re right - it has never worked for anyone. I bought the same TWraps charger mat the same week I picked up my R1S and it works grt but I also hate that both USB ports are filled. I’m not going to take the time to rewrite like you did but love that you’re showing us how to and calling attention to some Rivian changes for the future, ie the little pen holder slot in front of the charger pad???? It holds a few toothpicks in my car. ;) Solid videos!

Great video Evan. I remember folks talking about the change sometime between late 2022 into early 2023 when Rivian took out the second horn and how some were complaining. When I picked up my R1S in the Summer of 2023c I was curious and couldn’t believe the clown car horn they allowed to go in these beasts.No clue how the horn decision passed any team’s approval TBH?? I had to watch your video just to see how to fix this and unfortunately I don’t have the time but grt job walking us thru it. The outlet is another changed that happened to reduce costs, so thx for doing that piece too. Love my R1 and no vehicle can be everything to everyone but the horn was for sure a hungover Monday morning misstep in Normal for someone. Cheers

You could show the mobile charger problem first❤

great video. how big is your garage if you don’t mind me asking? how big would you recommend for fitting an R1S?

This charger cluster frak is why MagSafe is genius by Apple. Magnets, how do they work?

So weird. Everyone complains about the stock charger. Mine works great.

All my iPhones work with the charger.

I'd say problem 1 (phone charger) should be fixable with a software update. How about no hot air from the 3rd row seats.

Thanks for the video. Do you know the size of the washer/nut that you used to fasten the horns onto the Rivian in that spot? I'd like to do the same thing because I agree the horn that comes on the Rivian from the factory isn't very good.

Evan, Thank you... look at adventurehightech stow n charge. also magsafe, already wired for the existing rivian plug and has a nice closeable compartment to take advantage of the unused space. May cost a bit more, but about 10 minutes to install. Best mod of mine so far.

Ceramic Coating would be good to protect your cad!!!

Has Rivian finally integrated Carplay now?

Bro thanks for these updates I’m definitely looking to purchase a rivian soon and this helps

You’re still far ahead of me. I’m driving a 21 year old manual everything car with no AC no stereo.

Doesn't this unit serve another purpose when reprogramming or updating the key fobs? I think there was something about that which is why there is more complexity on the circuit board than would make sense for a charger alone.

I'm sorry, couldn't get through the video.... too many 'umm's and 'ah's and once I noticed them I couldn't not hear them... sorry again. Good content though

Totally agree and maybe they could have removed the wireless charger and leave the 500hz horn if they were looking to cut costs. I bought the hella dual tone horn and replaced it. I didn't even use the 400hz one that Rivian has. Search for the DT connector which plugs directly to the Rivian horn connector. Great video.

The phone chargers work well for our pixel phones. Gotta put them in the right spot which is really easy but my phone stays put. I've heard others having trouble with it as well.

TWRAPS is nice, but my bet is on the S00nish makes a better replacement 3D printed wireless charger using OEM Apple MagSafe chargers.

Love the color, looking forward to your future video's.