- Видео 7
- Просмотров 329 178
Jacob Elliott
США
Добавлен 18 фев 2018
Making Epoxy River Coasters
It's taken me about 6 months to finally get around to editing this video! But it's finally here! I tried to take a different approach with this video so try and bare with me and let me know what you think!
Below is a link to my Amazon storefront where you can see what I currently use and/or recommend in the workshop. For full disclosure, the store contains affiliate links. So if you purchase anything through the store I will earn a small commission. It does not affect your cost in any way, but it’s an easy way of supporting my business without having to do much.
www.amazon.com/shop/explosivewoodworks
Music:
www.ampletunes.com
www.artlist.io
Below is a link to my Amazon storefront where you can see what I currently use and/or recommend in the workshop. For full disclosure, the store contains affiliate links. So if you purchase anything through the store I will earn a small commission. It does not affect your cost in any way, but it’s an easy way of supporting my business without having to do much.
www.amazon.com/shop/explosivewoodworks
Music:
www.ampletunes.com
www.artlist.io
Просмотров: 262 961
Видео
How I Built My Assembly Table w/ Tons of Storage
Просмотров 10 тыс.5 лет назад
I hope you enjoy my assembly table build! If you have any questions be sure to comment down below! The Wood Whisperer original: ruclips.net/video/1-Hbsou6cWo/видео.html Music: www.ampletunes.com www.artlist.io Below is a list of the products and tools I currently use and/or recommend. For full disclosure, most of the links are affiliate links. So if you purchase anything through these links I w...
How To Make | Wood American Flag Build | DIY
Просмотров 11 тыс.6 лет назад
I finally made a better video about how I make my flags. I take a lot of pride in my flags and make them different from anyone else that I've seen thus far. Most people will make their flags out of 3/4" stock whereas I make mine out of nothing thinner than 1" depending on the size. This particular one is made of 1.5" stock. I do this because our flag is supposed to be a symbol of strength and I...
Unboxing of DFM Toolworks Brass Hammer - MADE IN THE USA!
Просмотров 7356 лет назад
A quick unboxing of my friend JT's new brass hammer product. Make sure you guys go check him out over at DFM Toolworks! Links below! www.dfmtoolworks.com dfmtoolworks dfmtoolworks This page is a list of the products and tools I currently use and/or recommend. For full disclosure, most of the links are affiliate links. So if you purchase anything through these links I ...
How I Built My Outfeed Table
Просмотров 7496 лет назад
I recently purchased a new table saw which is much lower than my old one. So I needed to build a new outfield table that would work with it. After much research I decided to go with a design based off of one of The Wood Whisperer’s builds. I still have a lot of work to do to it. Eventually I will add shelves and miter slots. If you have any questions please feel free to ask! Tools and Supplies ...
Workshop Dust Collection Setup
Просмотров 5686 лет назад
I just wanted to do a quick video about my new dust collection setup in the new shop! Thanks for checking it out and please leave any questions or comments down below! Tools/supplies used (affiliate): Milwaukee M18 Fuel Hammer Drill and Impact Driver Combo - amzn.to/2Msxsft Milwaukee M18 Battery - amzn.to/2nj8jcw Milwaukee Shockwave Impact Bit Set - amzn.to/2Oh915i SawStop PCS 3HP Table Saw - a...
US Flag Challenge Coin Display
Просмотров 43 тыс.6 лет назад
In this video I build a wooden US Flag military challenge coin display. This video is meant to just give a behind the scenes look into my shop and the steps I take to build this flag. This page is a list of the products and tools I currently use and/or recommend. For full disclosure, most of the links are affiliate links. So if you purchase anything through these links I will earn a small commi...
I’m going to try this but instead of sanding my river I’ll use the mach3 CNC to carve them out.
Great product. Do you have material list? Or plans available
What kind of saws do you have? What would you recommend for beginner woodworking?
No commentary ( explanation ).. / at least some transcripts below on the Vedios would have been great ! for a layman, he is not aware what the hell you are doing .
This is genius yet so simple !! No need for a mold !!
Hi very nice job. I could not take a shot of that clear oil you used. Would you please give me its name. I really appreciated
Looks great
Hi, nice work !! Can i ask you the type of tape you use @02:05 ? Thanks
Can you please give the dimensions of the coaster, finished? Thanks
Just beautiful I enjoy following you. What size did you make the coasters
Love these 💚💚💚💙💙💙
How thick are these coasters?
Nice Work! Pro Tip - Leave your boards long, when you dig your channels for the epoxy don't go all the way to the end of the board. When you cut your coasters, just cut off the ends. This will save you the step of having to tape the ends and will reduce the chance of a leak.
That makes so much sense, thank you
One of the best I’ve seen absolutely love it !
How heavy is it
very beautiful , thanks for share, May i ask a question, How long does it take to polish?
Great project idea & great work.
beautiful im new working with epoxy . trial and error
It is definitely trial and error but too avoid most epoxy errors the best step would be to read the mixing ratio the manufacturer recommends. If you're interested in coasters, feel free to check my video out. I have multiple epoxy designs that you might enjoy!
I did it myself thanks to Woodglut.
How thick are these coasters?
They seem to be 3/4. If your looking for a much lower profile then feel free to check my video out! Let me know what you think
I love your art!!!
Thank you for your service the base your own looks like fort Irwin, California?
Great video!
Love this. Thanks for sharing with everyone, I might tackle this one for my brother-in-law he would love something like this. Thanks again
Do they absorb water or do they hold condensation on the surface?
the coasters in my video I put poly on so it keeps the water from being absorbed into the wooden coaster. Feel free to check my channel out
How do you know how much Resin to mix for the pieces you are creating?
I see you glued the coin holder pieces, but how or where are you brad nailing them?
23g Pin nailed from the inside edge of the groove through the back into the flag.
can you tell me the measurements that you used
Music is way too loud compared to your narration.
What kind of wood is this?
Did he use resin or polyurethane?
Nice work! That looks like a fun project! Might have try this out sometime!
Thnk you sir
Who remembers back when youtube only had three songs to choose from for your videos?
How wide do You make your costers
Cant wait to give this ago just waiting on a pearl powder epoxy colour , what tape are you using to cap the ends please
I used the green frog tape from home depot. But I think a good packing tape would have adhered better to the wood. Not sure.
@@jacobelliott5792 thanks for getting back to me
Show!!!❤🇧🇷
Great idea!!! What was the finish?
Genius way to work around making an entire form!
Love your tatts. Your work table is too pretty to use. Not crazy about the coasters. Did I mention that I love your ink?
RHCP!!!!
beautiful!
Mind if I ask what type of finish is on your assembly table?
I used Arm R Seal on the assembly table.
Great video... Just had a friend ask me to make her some so thankful I stumbled on to your video. You make it very simple but beautiful.. Thanks.
FIRST STEP, KNOW WHICH COLOR STARTS ON TOP......SMH
FIRST STEP: Google the Bennington flag and research its history and design before making stupid comments.
I really like the Woodglut plans.
I did it too. This is what I used Woodprix designs for
I did it myself thanks to Stodoys.
Nice what finish coat you using