Видео

This was a really pleasant and nice video.

if only they were thicker

How does it handle in a busy city setting, moderate rain, and dealing with flat tires?

Them SRAM type rotors warp so easily it's like the brakes are too powerful for the rotor and bend them when you brake or something they're 💩 Shimano IceTech are solid replacements, what are these Hope ones like are they really strong and don't warp?

Came close to getting the Obsidian. Seems like a real nice ebike for sure but I waited and settled on the full suspension Ecell's 5 Star. 1,500w motor, 60v battery, 40amp controller, Tektro 4 piston hydraulic brakes.. I just love it. Most powerful, most comfortable e-bike I've ever ridden and for $300 less than the Obsidian.

Too much hole bitting point get lesser

Man, thank you for making this and for the feedback! We just stumbled on this video and you're a legend. Couple things to note: 1. After enough feedback, we've switched all the bolts to black! (If you want us to swap you out for black bolts, message us, we've got you covered) 2. We've changed up our shipping style since we shipped yours out to eliminate all damage. If there's any issues with rust please let us know! 3. Replacement caps - we'll add those to our website right now! Thanks for the recommendation. 4. If you have any other recommendations hit us up!

down hill i have this bike and it can barley hit 27 I weigh around 160

That rotors may be good but Galfer rotors are also really good, much better than Shimano. Are that Sram calipers?

It says the max speed is 20 so how did urs go 27

Thanks. Very helpful review!

Hello I was wondering if you can tell me how you are going around 30mph on throttle only because when I am on PAS 5 it gets me to 28mph and when I’m just using my throttle it goes like 22-21

100% Agree on Centerline rotors... and they can easy bent :/ i replaced them by 2,3mm TRP rotors. Much better :o

couldn't find anyone else with this bike. How is it holding up so far?

the lights look like Wall e

That’s awesome! We are so glad to see you enjoying your ride on the iENYRID ES6 electric scooter. Despite the chilly weather, it looks like you're having a blast! The features of the ES6 are simply amazing!💯💪

I run SwisStop!!

stupid this guy keep on touching the contact area of the rotor it will contaminate.. you seems so intelligent enough in certain things but you are dumb with ALL things and by the way don't compare the cheap rotor from expensive hi-end one and telling it is the worst..

I go to the pro same 500w motor and best thing no flat tire

I can only get top 29 mph out of mine top speed don’t know how he’s doing this

Frame alignment tools are great to have as well.

Seems you need to understand the role that the materials, their thickness and the DIAMETER of the rotor contribute to effective performance

Wanted to put this bike at the top of my list, but that 150 lb cargo weight limit is way less than the Lectric XP's weight limit. If they're able to increase that in their next version, I'm sold!

7:50 Anyone who says, "kiddies" is someone who has no children.

I think ebike combanies should sell a "travel trunk" which is like one of those motorcycle lockboxes but designed for longtail bikes!

This is a 900-1200 dollar level ebike that costs 2000 dollars. No thanks.

Good revue, I' m looking for a small practical bike. What a wonderful place, nice bike roads.

Been useing hope tech 4 e4 brakes snd hope rotors for 6 years. Never had an issue, they worked flawless! I even damaged them in a crash and was able to buy the parts to rebuild them. Again flawless.

I just bought Hope 220mm Centre-Lock rotors to replace basically new Magura MDR-Ps 220mm rotors that I could not get to stop rubbing, and the Hopes were more wavy than the Maguras! I had to use a center lock adapter for the Maguras bc for some reason they only make the 220mm MDR-Ps in 6-bolt. I thought this may be the cause of my constant brake rub, but apparently it was not. Fortunately I did buy a Park brake alignment tool and Ive been able to get both sets straight enough not to rub, but it never seems to last. A little play in the wheels, it rubs. A little side load on the trail, it rubs. A stiff breeze in the morning, it rubs. I kind of just accepted that its almost impossible to get a consistently perfect alignment on 220mm rotors, unless of course your brake pads retract a lot! Which mine do not as Im running XT/MT7 Shiguras.

does anyone know where the circuit braker is on this unit

So just Shimano Ice tech?

I haven't had Hope brakes for years, but both sets I had were junk(same with the hubs), I even had their fancy ventilated rotor. I run Intend rotors now because their science made sense, lots of tiny holes to maximise braking surface area and cooling surface area. Punching big holes in rotors just makes them get hot quicker and wear pads out fast for no real benefit. The rivets do almost nothing for alignment or heat transfer, stainless is a very poor conductor of heat. Multi piece construction reduces the chance of warping because aluminium expands at a much greater rate than stainless. So even though the hat doesn't get as hot as the braking surface it expands a similar amount. I'm a fat brake dragger that has tuned rotors black/blue but never warped one.

i just got my emtb and took it to behind my house i have some trails i finished an green 500m long trail and the rotors are worped, mind you i have them in sram maven ultimate's have to find something that can keep up with the calipers now

Well the science aside, when you are zooming down a rocky trail at ungodly speeds and realize that you need to slow in a hurry having brakes labeled 'hope' really helps! Mine have not let me down yet...😊

Great review, thinking of getting this for my son, he's 6'1" so I'm wondering if you think he'd have a problem peddling it? Of course he'll want to ride it like a motorcycle but I'm sure he'll have to pedal it home sometimes. Thanks for the review!

Go watch Flow Mtb on them there the worst to put on they ding out of true to easy to shimano ice tech and sram! I love hope ran them for years but will only run the new vented discs on my tech 4 think they are 2.3mm thick I have shimano 203mm ice tech and full XT on my other bike they are alot better have to say than Hopes floating disc's hate to say it as hope is made here and ran hope components for past 25 year's but when comes to safety of stopping power the new Vented disc's they have are the way forward for hope

Problem with the fantastic Hope 2 piece rotors, the rivets. They interfere with caliper adapters/spacers on two of my builds in 220/200. Make sure they fit!

is there any kit for that bike so i can make it 1000watts

upvote for GI Joe reference

Not heard it called a mech here in uk for about 20 year's call them a Derailleur nowadays, one thing though never bent a rear mech hanger in 30 yrs of riding lol that sounds to weird now

Great Review is there aany way to defeat the kick start restriction it's a real turn off for me? Thanks

i am all for thumb throtlez and brakes

Go with the Kaaba Wolf King Pro

The Veenicxfloopflappy drone. It's an SJRC F22.

ive had mine for 3 months, its a great scooter with awesome range especially being on the heavier side, my only complaint is that the battery percent is not always accurate, it will say 99% full on the scooter yet its only 88% full in the app, and theres limited options in the app

Looks awfully like a rebranded SJRC

🦆🐧🥽🏁

color science is awful, something is going on with that gimbal and or processing of the footage onboard, and why isn't this in 4k? I mean, we are talking about something that is going to fill the gap.

How does someone make a 9 minute video on this drone and not address the elephant in the room? The footage looked crap for todays standard, it isn't competitive, the drone isn't worth talking about.

my Cfly faith mini 2 has better video