Видео

Good video, I did this today on my 2.7 petrol hilux, i didn't take the fan off, just unbolted the shroud and pushed it over the fan and had enough room to remove and replace the radiator, cheers for your work with the video mate! it helped heaps!!

Hi mate! I have the same noise, did you find the problem?

Thanks Anthony very appreciative of your efforts to make this video. I could not have done it without your ‘help’. For any future readers, if your hilux has 3rz with passenger airbag and ABS, you’ll need to remove the engine management and ABS modules, but otherwise follow the process outlined in the video. Cheers again to Anthony , a Champion.

its probably not going to last more than a few days. sometimes i have a noisy tappet for 10 sec on cold starts after car stood still more than 1 day. i've tried the liqui moly tappet noise stopper and the next day it ticked for 1 minute and the next 20 starts i didnt came back and i.really thought it fixed it but after i while it came back. i think one of the tappets is not holding the oil as it,s supposed to due to age and mileage. m52s are known for those temporary loud tappets especially after doing donuts or abusing the engine.

You should look at two step garage for the steering kit and the other options that he has on the site.

Love the vid, Ant!

Great tutorial 👌. I have the 3l toyota hiace, but would this be a similar process behind the dash? Would love to have my heat and aircon working again

Nice video mate!

If any of those interior trim are in ok condition they are sought after on marketplace if you’re ripping them out anyway. 2.8L is more than enough to slide. Following the build mate. Lets go! 🤙🏻

Hello, I am Sakib Ahsan Tamim. And you? Hello, I saw that in your content quality is good, but not getting much engagement, Then, I analyzed your YT channel and I saw that in your channel have some problems, that's why your channel is not growing. Your videos is not reaching to targeted people, not getting engagement. Do you want to know these problems? If you can give me permission I can tell here, . Where Can I tell? here or email? fb, twitter, telegram, Instagram, anywhere I am available, also here. Where you want to gain this knowledge? And also a question how are you>? I am good

just do a 6cyl m52b28 bmw engine. easy to swap, lots of support and parts available, they handle boost very well.

Yewww! I’ve missed this series.

Did you figure out problem after i took off my sway bar and still hitting on my frame thinking if spacers might help out havent got to that point yet 😅

Hello i have the same hilux . But i have question . Does this model has the cabin air filter For Air-conditioning? If yes then where it is i cant locate it . Thanks

Too hard for me mate...just going to undo the hoses and block them with bolts and screw clamps and go without a heater...just be using a blanket for those winter drives...as long as i've got air con for the summer that'll do me!

Is this on the coast or Melbourne ?! Looks like Melbourne weather.

YEEESSSSSSS 🎉 ❤❤❤

Thank you so much for the video followed it pretty much step by step took me roughly around 4.5 hours from start to finish note if you have a 5le you will need to remove the computer to allow the heater box to slide out

same model 323ci don't know why the reverser gear don't work anymore got the car for 2800 ways fine when I got it left 5 days parked and boom no reverse

Good video, where is the heater valve please as I need to replace mine and toyota can't find it.

So much work to change out something that was working good enough 😂

Hi.please sizes

How long did it take from start to finish

Hey ! Where is the e46 ??? I bought a 323ci this year and turning it little by little into a drift machine. I love your videos, inspiring. 😊

Super simple, cheap, might actually keep this in mind just in case I decide to start to do catless headers.

🤦🏻‍♂️ at least you earned +10xp

What material piping is this? Did you have a resonator delete done aswell or just rear muffler?

Love the videos

Will it be able to come out drivers side so i dont have to regas aircon..

yewwwwwwww

Looking forward to this. 👍🏻 Have a squiz at Kazz Engineering. He Specialises in E36 bolt ons and is a local buisiness in here in Queensland. My mates E36 has angle kit and lca’s from KAZZ and they’re pretty good. Already posted this but I think YT took it down because I added the link. Love ya work. 🤙🏻

id go for a 6 cyl bmw engine. KISS= keep it simple stupid! i kid but you get what im saying., get to the track as soon as possible you can always turbo it later. don't spend stupid amount of time and money.

LS the world!

It’s been a while Ant!

Top tip using the funnel to eliminate air bubbles from the system! Great video, thanks.

Man I am spewing I didn’t see this before I bought my hydro 🥲 Just out of curiosity where do you get the bubble flare adapters for the 3/8 fittings. Do you have a link of the bubble fittings by any chance? I’m in Australia too and having a hard time finding any.

Those lock adaptors work much better if you just extend your lcas

Beautiful job

I salute you and love how you learnt from mistakes ect best guide look forward to more

Hello thanks for sharing your experience, i just wanted to ask where i can find that “ t pieces 19:43” or what is it called? Thanks

THANK YOU 👍👍👍👍💯💯💯💯 just done the same job but got stuck last hour on the plastic control arms. ( I took them off ) Life Saver

Where did this guy disappear to…?

Top legend for this!

does this metod possible? MC to ebrake ebrake to abs?

Cool, beautiful done

Hey mate does the air con evaporator have to come out first?

best video i’ve seen on this so far cheers mate

We're abouts did you get the heater core from?

Hey where are you in Aus? I’m having exactly the same problem as you and need that 3/8 bubble flare adapter this weekend🤦‍♂️