- Видео 8
- Просмотров 33 799
ProjectZs
Добавлен 7 дек 2019
Nissan Z Enthusiast
350z / 300zx
350z / 300zx
Nissan 300zx STOCK turbos FBO E85 2-3-4 pull!
A quick 2-3-4 pull on a beautiful sunday morning, this 34 year old machine is still rocking the stock turbos with 180k. Recently completed compression/leak down test, the 120k timing kit, gas tank was cleaned and retuned by Sebastian at Specialtyz.🤘🏽
Просмотров: 835
Видео
300zx TwinTurbo vs 2014 Mustang 5.0!!!
Просмотров 6 тыс.4 года назад
Since i been slacking on content heres a quick video of some runs with my buddy’s Coyote w/ 4th gear issues that will soon be fixed so we can see how their top ends compare. 2014 5.0 Intake / catback / E85 tune Vs 90 300zx TT FBO Stock Turbos 15-18 psi
350z HR PPE LONGTUBE INSTALL TIPS!!
Просмотров 7 тыс.4 года назад
Sorry guys for not recording step by step but i hope this helps you guys if you decided to install longtubes on your HR. Thanks for watching!!
370z Upper/Lower Plenums install on 350z HR!!
Просмотров 3,3 тыс.4 года назад
Sup guys back again with another under the influence video, i apologize for all the verbal errors on some of the parts mentioned in this video. However, never seen any video on youtube on what modification is needed on the HR rail to fit the VHR rail so i decided to make one real quick, hope you guys like it! Comment like and subscribe, peace!!
HICAS delete on my Twin Turbo!!
Просмотров 3,2 тыс.4 года назад
Sup youtube friends in this video i go through the process of completely taking out the HICAS system in a 90-93 300zx twin turbo, only other thing i could of done to get rid of the return line was remove the pump and modify it, however it was easier to just loop the return back to the reservoir for the time being. Thanks for watching guys if you have any questions comment below and dont forget ...
350z HR Mod List / Dyno Results!!
Просмотров 7 тыс.4 года назад
Just a quick video going over the mod list that gave me 314whp / 268 wheel torque at Specialtyz with the best tuner Sebastian! Stay tuned for more as always like and subscribe, comment below what you guys want to see, I appreciate !!
350z Cruise Control Install for Uprev ARC
Просмотров 2,8 тыс.4 года назад
just going over the Cruise Control Retrofit kit install on my Base 350z HR, best thing you can give a tuned Z on Uprev to utilize ARC. I apologize for my breathing that can be heard in the video as i was utilizing a mouth mount for the camera. Hope this video helps out fellow Z owners! thanks for watching!
350z HR Bolt On's & E85 Acceleration!
Просмотров 3,9 тыс.4 года назад
just a little pull babying gears 1-4. Currently on an E-tune since recently adding a 3in intake, hitting the dyno again soon!
Nice pull bro love my z
@@joshuasutton4043 thanks brotha! 🤘🏽
Fasttty , how much power is that thing pushing? Boost?
@@JamieGuzmam thank you! Its only around 450whp and a little over 500ft-lbs of torque with tired old stock turbos around 22psi(GreddyProfec).
Damn that's a fast car bro
@@sp3gg thank you! If i would of finished 4th gear and threw it into 5th gear i would of been able to show the top end power, she just keeps pulling.
They just put this on gta 5
Very nice!
Thank you!
Why is it cancelled Is it insecure?
Been years but great video. Did you have any problems afterwards, deleting that connector and just hooking the line straight to reservoir at the end of the video?
@@aarongraybeal5503 lets just say alot has transpired in those last 3 years in my personal life and family life and just cant catch a break financially with the legal system lol. Aside from the personal stuff, the HR was state reffed while driving normal taking my dog to her appointment for being too loud lol. That finally got dismissed April 19th. I was staying lowkey with the car stuff while the state ref was being taking care of by my lawyer, Covid slowed the process down forsure. I did get a new Z so when i make an update video ill touch up on all the aforementioned a bit, the status on the Z’s etc.. Im glad i was able to help you with the HICAS line. I have so many deletes on the z32, ive probably removed over 200+ pounds lol
you add a single turbo to these cars and they will beat almost anything on the road and still be reliable, very strong motors just keep the oil in them.
Could I put ported VHR upper and lower manifold on my HR? Bc I wanna make good power and if Ima get VHR plenums might as well get nice upgraded ones
Yes, thats what im showing in this video.
Nice!! I have a 91 TT with all bolt ons, bigger turbos, 555 injectors and Godspeed intercoolers. I had it tuned at Z1.I just got it running again for the first time in about 7-8 years, I can’t wait to start gapping cars like this again 😂😂
I just got my Ppe headers do I need the 02 spacer extension the angled
nice video I wanted to know if this makes your airbag light blink while the car on
Where u get the little filter bro
Conceptzperformance 🤘🏽
I have a 08hr sedan but man I don’t think this has the potential of the hr 350z 🥲 but I’ll eventually try to turbo myn still running well at 200,000 miles 😂😂 the funny part is I have raced charger rt and scat pack on the street and from 0-60 at least I always take em 😂
I have someone in my town selling both VHR upper and lower for $185 which he lowered the price from $400. So I'm wondering if it's really going to be worth it? I mean that price is kinda too good to be true but sometimes you never know. Is there a way to tell the HR and VHR upper and lower apart from each other?
If you add turbo you're going to have to do this again and put in short tubes. Or you might as well never put in turbo. Has to do with the backflow ruining the flow of exhaust etc
does anyone know how to do it on the 2005 model. thanks
Z1MotorSports has the 03-05 retrofit kit.
Nice video, Helped me out a ton! Does anyone know if the g35 buttons will work on a Z of the same year?
Hi nice job, but where but where I can get the connector that joint the lines once you delete the selenoid
Damn i was just thinking of going with Ported Upper/lower Hr plenums but looking at the commenst i guess you get the same gains with both right? But just with the Vhr Upper/lower plenums it holds power until Redline? I think the 6whp you gained was from the PPE Headers and not so much the Plenums but idk really haha i only say that because 6-8whp gains is what i usually see from longtube headers
I would agree on the 6-8whp gained from the longtubes, the plenums VHR plenums i believe help keep peak power until redline. Combination of parts also makes a difference as well.
@@projectzs1993 foreal you are 👀 i will buy them immediately once you do try and sell them 😂 ill follow you rn 🙏🏽
what gauge wires do you need to make the extension? Is the extension length matter?
Look into Nisformance extensions for longtube headers. Best in the market.
Have you dynod it since?
Dang I wish you were still making videos on the z33
Soon bud, ill get back on the grind.
What Nisformance number did you get? Is it number 3 for the 07-08 HR for 350Z/G35?
Type 2🤘🏽 they finally got them back in stock, mine just came in a month ago, alot better than splicing and crimping and or soldering. Enjoy man!
Did you feel any substantial gains from this mod . I have a G37s and I am very interested.
Its a bigger upgrade for the HR motors since the HR plenum isnt as good on top end as the VHR plenum. So you will get gains doing both upper/lower, however its up to you if you want to spend the money or port them yourself.
I think u used the wrong headers Those differences in diameters make a huge difference. Where is the dyno? It is a waste of money to spend $2000 and only gain 6whp.
I dont have the dyno video but i do have the sheet. I did use DE longtubes as i stated in the video. And the diameter was still larger than oem manifolds plus better runners and collector regardless. It isnt always about peak gains, its gains throughout the powerband. Mind you, before the longtubes, i already had this car tuned FBO with the exception if throttle bodies and cams. No longtube header is going to give you crazy gains after that UNLESS you do longtubes first. Would i buy PPE’s again? No, i think you can get the same gains with ISR longtubes, all depends on the combination of bolt ons. The car is sitting at 320whp/267wtq. Im happy with that.
sick video bro, quick question though I just bought dc shorty headers for my HR, I already have berk non res test pipes, megan y pipe and a single exit exhaust. I’m getting the car tuned in a couple months, it’s running good now. Should I wait to install the headers when I get my tune or can I run with shorty headers and no tune for a couple months?
I would install shorty headers and get the car tuned with all the parts installed. You can drive the car with aftermarket parts and no tune, but its always better to get a tune right after installing all of your aftermarket parts.
This would be the same for g37 base models?
Sorry im not sure if it applies for g37 models, dont they already come with the switches on the steering wheel? Even the base models?
@@projectzs1993 base models here n new zealand don't unfortunately
@@projectzs1993 I got car tuned with uprev but I just put all the features in one tune as unable to change tune haha na in New Zealand most don't have cruise control unfortunately
Even if you lose...this was made to be a canyon car anyways🤷🏾♂️ 330 whp is more than enough in the touge.
Quick question, so I got my base 350 tuned with uprev and ark and have about 5 maps on there. I don’t have the cruise control buttons on my wheel so I can’t switch maps. Since my 350z is already tuned can I just add the buttons and it would work? Thanks guys
Thinking of doing this on my HR. Did you get a noticeable benefit compared to ported HR upper & lower? (after retune)
I got another 6 whp, however that was with the addition of PPE longtube headers. I had test pipes on stock manifolds prior. So after the 370z upper/lower ported plenums and PPE headers the difference was another 6 whp and top end power went from falling off at 6900rpm to holding max whp all the way to redline at 7500rpm. Your combination of parts and tuner will yield different results as well. Car is at 320whp/267torque. Stock cams, stock drivetrain.
@@projectzs1993 wow, only 6 with PPE? However 320whp is crazy with stock cams. Are you running e85? As far as the chr manifolds, how was the torque difference? ie was it less torque down low, more power up top or more power through out?
@@ryanscanlan9875 yes only 6whp gain, however the PPE’s really cleaned up the graph and torque kicks in quick and top end just keeps going. Im sure if i had another tuner that “pushes” the limit for clout #’s it would of made more. However, im happy with my tuners been with them for a long time, my single turbo kit actually comes in today so the PPE’s will be for sale.
@@ryanscanlan9875 and yes on the E85
@@projectzs1993 Amazing - r u going rear mount or boosted performance mid mount?
Did you wind up having any leaks after you removed the collar and went with the more direct route for the lines?
No sir no leaks at all and it looks more clean without the collar👌
What you have under hood? Im looking setup for my 300zxtt too!!
All the breather mods, boost controller on stock turbos and E85, in this run i was around 16-18psi i believe.
@@projectzs1993 were you on e85 during this run?
@@austinweippert4065 its flexfuel yes, E82 is about the best we get where im at.
Yo G does the motor need to be taken out to take power steering pump out?
No sir it doesnt, its easier if you remove the intake/intercooler hoses/vac/boost lines and remove radiator, plenty of room then, the radiator can stay in, but since its so easy to remove i personally remove it, perfect time for a coolant flush🤷🏽♂️
Did you have to get new injector clips mine won’t go on because it’s turned and not straight out
@@projectzs1993 what about the back metal hoses that also go into the throttle bodies did you take them off the hr and swap them over to the vhr?
@@F30caleb the metal hoses that go into the throttle bodies are coolant lines that run hot coolant through the TB’s to help them function during colder weathers, but are a common delete for HR’s. I have the delete on mine where i re-routed the coolant lines so i have nothing going through the throttle bodies. With that being said, the HR and VHR should have a similar throttle body coolant line system. It can be deleted and re-routed or hooked up the same way.
We're you able to still use the stock HR injectors with this 370 upgrade?
HR, VHR or GTR injectors fit just fine👌
@@projectzs1993 what year of 370z do you have to find to fit you HR ? My Z is a 2007 roadster so what used 370z do I take from?
@@divahairline Any 370z/G37(VHR) plenum will fit the HR model, but you also need the lower plenum and fuel rail so it all bolts up correctly and modify the fuel line like i do in the video. One other note, some intake manifolds come with longer bolts, mainly the newer models, so if you get a used plenum, make sure you also get the bolts it came with.
@@projectzs1993 what year is your Z and what year 370 parts did you buy?
@@divahairline my Z is an 08 and i used 2010 370z UPPER and LOWER manifolds + fuel rail.
Had to sub love the Z you got an ig by chance brother?
Appreciate it bro! And yes its _gp93
Would I have to get 370z throttle bodies? And if I wanted to go bigger injectors would I look them up as 370z injectors?
No throttle bodies are the same i believe, i have HR throttle bodies and fits like oem. Might as well get GTR injectors and run E85.
I definitely recommend anyone else reading this to take off the steering U-joint too (as he showed). You don't need to take the rack off, just 2 x 12mm bolts on the joint but paint mark the rack/blue plastic thing/U-joint in a line FIRST ! If yours is like my one, WD40 the threads, pry open the joints and it WILL eventually go upwards and it'll just give you that little extra clearances you need.
ik that’s the stock speedometer and the tt z32 has a post gauge under the mph (like the oil is under the rpm) and in this vid i couldn’t see any kind of gauge it ain’t tt
How many miles on the z?
When you did that tune
@@lajoya9002 when it did 314whp i was around 50k. At around 52k i went back with longtubes and got 320whp peak but gained alot more along the power band.
Thanks bro the explanation on the process really helps 🙏💪
@@projectzs1993 yeah bro like how you got into detail alot of video don't do that I appreciate it brotha
Vg power baby
Alllll dayyyy🔥
Yeah boy!!
Hahaha! Dude you got so much shit under that hood. 😂😂 and I’m Z boy, this is awesome bro, but still this ain’t stock
owning the stangs
Yo followed these steps and had no issues other then my o2 sensors being melted on the threads did it in 4 hours 👌 make sure to buy a 1/2 flex head or 3/8 flex head extended if your gona try this
omg it was red... and it’s been painted black?? red is the best colour on a z32 says the guy with a blue one lol
So did you ever get this car tuned I wanted to see how much of an impact 370 upper and lower manifold had on the hr..?