Видео

I tried looking up a part number, not finding anything at the moment. Looks like 6 solder points

@@cosmicgamingunlimited I contacted anbernic and it seems they are not selling that part. I think i might resolder those joints to be able to get the sound back.

if you have only one sd card, yes. if you have two cards like me then no. you can always move the games to your computer and put them back on the sd card.

I thought about doing a custom one. 3d printing and a raspberry Pi.

Heat up the screen with a hair dryer or heat gun. Don’t get it to hot. Just enough to melt the glue on the adhesive tape. I don’t do this part on camera because it’s loud and not good content. Once the screen is removed, you can use Goo Gone or similar glue removal. Then purchase double sided phone repair tape and tape the new screen on.

yw

Already did one. Was one of my earlier videos. It’s for replacing the analog sticks, but to replace them you have to do a full teardown. ruclips.net/video/ZwNsXYAyIq4/видео.htmlsi=Ra7f165wfuK7Ibgb

It’s a good deal. I sent out an email to the winner but haven’t heard back, going to redraw on Monday when I am back from vacation.

I am out on holiday until Monday. You may be able to go into the RA settings for N64 and set the buttons up. Also keep in mind the original controls of Mario 64. I can’t remember if the ⬆️⬇️⬅️➡️ were used in it. I know the C buttons were used for basic camera control. Z, A, and B. The Analog for movement. Not sure if the R button was used, but pretty sure the L was not.

Check the membrane and if the plastic rocker is malformed.

I am in the middle of contacting the winner. If I don’t get a response I will draw again. After the X55 is given away, I will give away the RGB10Max3 then the RG35XX H. I’ll see where I’m at subscriber wise after that to see if I will continue to perform give aways. Good luck to you!

Kept them. That data was kept on the games sd card. If you only have one card, you will lose the data. I suggest backing up your card to your pc

@@cosmicgamingunlimited thanks dude, yeah I have a dual sd card powkiddy (x55).

@@theautomator2001 Nice! It’s a good deal. It fits in the hands better than the RGB10Max3 and has an easier to remember name.

Did you try holding the button rather than tapping it?

I was disappointed as well. I wanted to test to see how the Anbernic native android version would hold up against the Nintendo switch version.

@@cosmicgamingunlimited I was actually considering buying this device because of the Android (and thus possible SW Hunters) compatibility. Am still going to buy, but too bad its not compatible. Thanks for this test though!

You will need to do everything in the video PLUS removing the screen. You will need to heat the adhesive with a hair dryer for about 2-3 minutes before removing the screen. Gently pry off the screen with a plastic expunger tool. If you are gentle you can reuse the adhesive. If not, you will need to buy new. Don’t overheat the screen, it will burn the oled and cause your screen to be brown.

They are great for the money! They are very similar to the RGB10Max3. If you can get it cheaper than the Max3, I say go for it!

I have a video where I swap the factory sticks with gulikit sticks. Gulikit sticks have swapable caps, not just covers. I have black, white, red, and blue to choose from!

Thank you for this!

In this particular video, I paired it to a Bluetooth controller. What this does is tells the game a controller is connected, but you can use the built in controls after that. There is a team working on spoofing a Bluetooth connection so you don’t need to use this work around. But what really needs to happen is to get the game developer to fix the issue. This issue exists on usb controllers as well, not just integrated controls.

Thanks for the reply, I shall give it a go tomorrow. I really hope they sort something, it's a real bummer it doesn't work out of the box. Thanks again 👍

When I did the test, only one stick was really bad. If you are in this situation and only play retro games, you should be good. I stream games to this device and I couldn't select certain items from weapon wheels in pal world until I did the replacement. Also, if you do the swap to both sides, the stick caps are removable from gulikit, so can remove the cap and get more space for hitting the abxy buttons.

Yes.

Pretty smooth. I haven’t done any endgame 100 enemies in a screen with 4 people spamming spells or a raid, but the city seems smooth and everything felt good.

​@@cosmicgamingunlimited Make a new video about the game's performance when played for a longer period of time, and what configuration it can run without losing fluidity and good graphics.

@@jonesdaluz9061 I have another account that is higher level, I can make a 3-4 minute video for you.

@@cosmicgamingunlimited pls make pls

$14-20 bucks for a screen when a new one is $43 on sale. Understandable. I am guessing the price will drop once the demand for the screen has ginned up. Other screens are $7-8 in this category. I think $7 is worth putting the effort in. Or you may just want to turn it into a tv only device and not repair or replace at all.

Done!

Done!

I have an affiliate link in the description if you’re interested in the future!

Yes, but should I? If everyone else is using it?

Yes

Just change it

@@Somekidsingingsomethings I had to disable it for another longer video. Just doesn’t work great and you can’t show off that the controls are indeed working.

@@cosmicgamingunlimited ok

Hey! Will do!

No problem!

Reaching out to powkiddy for a good distributor for replacement screens. The part number on the back of the screen googles to nothing, bing doesn't get anything off of it either.

@@cosmicgamingunlimited ok ,thanks

This is default settings, but you can lower them a bit to get a more stable gameplay experience. Hope this helps!

I only really had issues with this game. This is what I did. I went to the AMD website and got the drive update software. Windows Update and the Armory Crate Update was NOT updating the chipset on my ROG Ally, and a few other drivers. Once I had the current Chipset updates it has not crashed once. I showed in the video that my Ally was reporting everything up to date at the time, but it actually wasn't. The setting to run as admin was a fluke, it crashed about half the time when running as admin.

Done! I’ll have a short video on the 16th. Keep an eye out for it!

Yeah, you can see it’s running sub 30 while driving. It’s disappointing. I used aether and it runs well at about 1.5x. I’d like to purchase the android version that’s not the definitive edition to see how it does.

Mobile works, but warzone does not. Any game that requires the device to use a validated version of android or not be rooted will not work. COD:Mobile will not natively work with built in controls. You will need to pair a Bluetooth controller and that will let the built in controls work. Or you can use the keymapper feature, which I find to not be accurate enough to play competitively.

@@cosmicgamingunlimited that sucks, thanks bro

I’ll add you to the list.

@@cosmicgamingunlimited thanks! 🤞

They make retro gaming handheld systems. They used to be cheap pieces of plastic that were overpriced, but now make quality products that are reasonably priced. I really like them.

I think mine was rated in top condition. I saw some around $400 last week that were rated lower. I would be interested to see what a $400 looks like.

Yes. I recommend it. It would be great if they just fixed the problem at the factory. If anyone has purchase one lately let me know if the factory sticks still fail to hit all corners.

Thanks for the sub, I subbed back. Good luck!

@@cosmicgamingunlimited 😝

I didn’t know that at the time. I had just did a search for RG35XX H on AliExpress. This screen came up as the one from that seller. Oh well, got the screen correct screen in and made another video.

Yes ,I saw on your second video that you ordered right versions 🎉😊!

If you need other any lcd screen you can contact me 😊❤

I’ll give it ago when I get home

ruclips.net/user/shorts3nqAxsrprJc?si=YcYTzrRNvT99NoPv

Any thing on the device, not just games.

X formation? I’ll keep that in mind. Thanks John!

ruclips.net/video/wn2ln04dquM/видео.htmlsi=JYlaJ8HtGX2di-YE

They are Hall effect sticks from a different brand, not potentiometer based like Nintendo official sticks.

No problem! Good luck with the dark and the chaos and all that.

You’re welcome