Видео

Thank you so much. Hot water restored on daughter's birthday!

thanks for the video ! :D unfortunately my valves are not indicated by any way. I turned them the other way then they were , when I try to bleed it out, the water does not stop :D its coming out very slowly but continuously.

You should just turn off the cold wateer supply to boiler

From looking at the brown water I'd say The system could do with flush.

You know what’s poor about them, u fit one then the customer gets messages on the app from who owns them trying to take your future work, no other smart stat does that I don’t think, moved to Tado just for that reason.

Great tip thanks

nice and neat, thanks for sharing, great tips, i learnt a lot.

No trap

This is not multitasking idiot

Thank you. This video helped to restore the pressure, however i find that I'm having to do this often, almost every week. Is it normal for a boiler to lose pressure so often?

best explanation ❤️

The fresh water will have been rotting the hell out of the system, hence why it's orange, the sensor is probably full of gunk.

Was that poop ? Or rust water

💩🤢🤮

My arse after last nights 2 pints of bovril

Full video on RUclips

Aslaamoalaikum.brother im sorry but i couldnt stop🤣🤣 this has happen to me countless time.jzk for sharing your knowledge it helps alot.

Good work. I was screaming take the pressure out of the pipes 1st 😂

My tip is never to leave the aav open after venting the pump, it's only there for commissioning!

Looks really good. Its called having pride in your work. I hope i can one day do lovely neat pipe work like you

This looks really good

Don't do a wham bam thank you mam job!!

Please put benny hill music to it 😂. Great video but feel a bit 🤮.

This has been a very informative video. I am a newbie 😂

This is an attention issue…

Can you do this in Portsmouth? Got one that needs fitting too

Thank you!

Flexi ....when you've got plenty of space for solvent

This video is a life saver. Had one of these boilers installed recently. I presume the pressure dropped because the radiators were bled. Thanks for your informative content.

If using the 24v RT do you just wire as a switch between the two 24v RT connections. Can it be better linked to the relative terminals on the CP4 obviously without 230v links????? You help me greatly appreciated.

Mirror should on top of the sink . Not on top of a toilet. this redesign was a total waste of money. after spending all this money. they didnt move the toilet to the center and sink to right. not sure if the plumber was drunk when he did this.

I used to work in social housing over 12000 properties 90% Worcesters. Dealt with their aftercare quite alot and I agree they're really good. They would come out the same day if not the next day. I never fit Worcesters because of all the leaks they have but the Worcester 1000 is by far the best budget boiler. Started fitting them instead of Main now.

Thank you….

Up to 10miles from Coventry. £350 inc vat. Drop us a message or call on 02477360101 📲👍🏽

Hi Waseem, just to say, great video and you've certainly done some research to put this together, but just wanted to correct you on a couple of things regarding the TPI DC710 and DC711. The DC710 actually has a 12 Year Warranty and you mention that it does pressure but doesn't have a timer. The DC710 doesn't have pressure, but you can either buy the DC710C2 Kit or the TPI SP620 (manometer) separately, and that will allow you to do pressure. In the View app, you can connect the SP620 while the DC710 is on the screen, so you can see the Flue Gas Readings and the Pressure readings from the DC710 and SP620 at the same time. In fact you can connect 2 of the SP620s to the app at the same time as the DC710 and that allows you to see and record the pressure at the appliance as well as the pressure at the meter and create a pdf report. Also with the SP620 manometer, you can time the Tightness Test in the app, and this will also create the same report as the flue gas reports. The View app also has some Job Management so you can put all the reports created with DC710, DC711 and Smart probes into one place as well as creating a Landlord/Homeowners Certificate form the readings taken for that property. The DC711 has a 6 Year Warranty, not 5 as you stated and both Models have a "skip" option which cuts the Purge Time down to a couple seconds so you don't even need to wait the full 30 seconds. Sorry for such a long comment but hopefully this helps both you and your viewers. If you need anymore information or clarification please do not hesitate to contact us, or Nigel, as you have his details already. We're always happy to help!! Keep up the good work.

Great explaining 👏👏👏👍

Brilliantly explained. Electric wiring bit confusing. I am d. I. Y. Man.

Kane got the best service interm of annual calibration. Second day delivery

The Anton sprint pro 5 and 6 are £213 including vat for year 1, 2, 3 and 4. Year 5 is £278 (ex vat) or £333 including vat for year 5. Crazy when you think of it.

I've been using Telegan fga's since 2000, currently have Evo 3. If I were choosing my first fga, I'd go for the TPI. If money was no object, the Testo. Had a Tpi digital thermometer for over 22years, still accurate. Have only had good experiences with Anton and gas detection is great. I'd advise anyone to spend plenty of time doing comparisons and consider your personal needs. Thanks for a great presentation.

Any thoughts on the EiUk fga? Heard good things about it.

Thank you so much! Your video was incredibly detailed and made the process of changing the diverter valve on my Vaillant Ecotec Plus 837 so easy to follow. I couldn't have done it without your step-by-step guidance. Truly appreciate your effort and the clear explanations!

Top demo ☝️👍

Yes

Did one last week but just replaced the head. Allowed water ingress so kept tripping the board. Found a brand new head from a local guy. Boiler too old for all this trouble Would love to see full vid though

Main issue is limescale buildup causes not letting pressure into the system through this loop as it can get clogged easily

Error removed but my boiler pressure not getting up. Please help.

Jet wash the extension lead box too lol😊

Just sent my 456 in for calibration £286 well and truly feel they have had my pants down 😢 mine is 7 years old now, I reckon next year I’ll be in the market for a new one due to its age definitely won’t be a Kane, to be fair the do offer a good service, but I can’t justify the service cost anymore

Beautiful and very clean 🔥🫧