Видео

I appreciate the length of the video, no 🐂 💩

What is your measurement behind you ears ? Mine is 8 1/4 inch and according to Shokz, I would need the Mini and not the Regular. What do you think?

Thank you, I’m getting the mini

This helped thanks! I was trying to figure out if mini meant like kid sized but it just means a smaller gap for the loop.

Now this is a proper review. 0 fluff just the facts and perfect video

How much lift did you add with the ome lift kit?

Do you feel that the mini is hugging your head too much than the regular?

I was unable to "loosen the clamp holding the airbox onto the throttle body." I believe it's part 90005-RGA-000, which is a 4 mm hex and a phillips or JIS head as well. I stripped both of those methods of loosening through various idiotic methods (I did not have the correct tool for the job, a 4 mm deep socket probably would have saved me a headache). However, I was able to just manhandle the airbox off. I'll have to drill out and replace the poor destroyed bolt eventually. Also it was not in the same spot as in the video. The clamp had rotated so it was in a difficult location to access. It's funny how a 5 second clip in a video can turn into an hour of sweating lol!

How can I contact you for better info

How many kilometres does the engine have?

what a pain every 30k miles. I thought changing my trans and rear diff fluid every 30k on my wrx was a pain (and it was), but this somehow seems more painful. I'm all for doing simple, minor service yourself. of course I skipped my 30k mi fluid change and did it at 60k (oops). Thanks for the video. 🏁

Very helpful! Just the video I was searching for. Thanks

quick and very informative

last time I tried to get Patagonia to honor their lifetime warranty, I sent in a favorite 7 yr old pair of Baggies ( in a color no longer available) and got a really disturbing letter back along with a coupon for $15 store credit. ONLY problem with the Baggies was the elastic waistband. Never again. I think LL Bean is the only company still honoring their "lifetime" warranty

Make sure you trim your bump stops

Very helpful thank you

why helmet straps OVER headphones?

Thank you. This was the fix that worked for me. 2010 Honda fit sport

The mini one fit me so much better

I see too many guys scewring around with these valve adjustments and end up burning out a valve. Especially the exaust valve. I leave them alone unless absolutley needed.

I generally dont screw with the valve adjustment unless absolutley needed which is almost never. For plugs, use only NGK and a tiny dab of antisieze and hand tight only. (No torq wrenches). Replace plugs and coils as a set every 2 years.

This helped me determine that the mini was the one I wanted. Thank You

Very helpful

This was helpful

Do you have an instagram account for those builds ?

Thank you so much for this video!

this is great, thanks!

This really helps me choose. I wear a medium helmet, so I’m going with the mini. The pro sticks out way too much.

I really appreciate clear calm naming of parts. Thank you!

What size socket?

Great job, great pics and illustration/explanation. Thanks! 😉👍🏻

what if they both slid out? i was changing the hubs on my 2013 fit and this very thing happened just today when i went to put the hub assembly back on on both the driver and passenger sides.

I've spent 4h trying to figure that out when replacing the lower control arms in the past, such a pain

I measured 10" behind ear to ear and regular size is very tight. No gap between the band and head, device is actually sitting in my ear. Box has no indication of Mini so I assume it's regular.

Thanks for the nice review, I am ordering the mini

I have both😅

Finally someone addressing this. Thanks

Can't believe how good the sound off these are! Especially classical music. I was going to send them back but now I can't bare to part with them.

This was so useful. Thank you!

Hello there ! I have a 95 Montero LS. I’m trying to get parts , can you share spring Coils P/N?

Thank you :) very helpful

Thanks for the video! What's your head size (in cm)?

I took the bellow off to align the shaft. Can I get a metal band and replace the bellow? Will it cause any problems?

Once I get to the step to remove the manifold plenum - will removing it give me access to the camshaft cover?

Good job very direct

How long is your bed lenght?

Does the mini press onto your head more?

About to do this on my car. You said park for an automatic, but does the car need to be powered? Last time I parked I locked the wheels. ( battery currently isn’t hooked up, but can if need be )

Thanks for the tips

How to tell which are intake and which are exhaust valves?