Видео

Perfect, thanks. I needed to replace my wing mirror and had to take the panel off...which I hadn't realised before starting

My timing pin is stuck and won't come out after belt back on 😢

Whou to remove the amarok proshaft

Good if you mentioned the tools needs given VW need specific tools. I think a M10 spline and 13mm ratchett spanner is needed here. Thanks heaps re the AP vs AN- VW gave me the AN even though i asked the AP had to show them this video before they believed me. What tools needed to het alternator out?

Can you explain reason for this and what symptoms you were having to skim rear drums on amarok please

Thank you very helpful, 👍

Fan belt and tensioner keep on breaking after replacing. I am in JHB can you recommend someone that is clued up on this?

Why some amarok.have 2 batteries?

Greetings Willem do you have a trusted mechanic in and around JHB that is clued about the Amarok especially the belt issue? I have replaced my belt three times already and I think I need to take the vehicle to someone that can offer a permanent solution.

Willem, tänx for Your video!

Hi Willem! Hoe kontak ek jou? Ek sukkel deesdae met my Amarok. Voel of alles so stuk-stuk begin op pak. Ek weet nie veel van karre nie en sal graag wil hoor of jy dalk kan uithelp. Dankie, groete!

0:28

So my red wire that comes off the RCA lead at the stereo needs a 12v supply then it should work? Thanks 👍

Thanks mate great video.

Absolute legend! Thank you so much!

Thank you so much! You have no idea how much this has helped me along with your head unit removal video. I'd buy you a beer or a good feed if I could. Wish you and your family nothing but more blessings in life. Love from Australia :)

Amazing, thanks for making the video and helping everyone docthe job themselves ❤

Stupid place for the bracket having to loosen off the ecu, good job I watched this !

Nem mutatta hogy teszed vissza biztos kinlótál vele kabd be akampóșt

Hallo Willem hoeveel ure is die werk op die Amarok

Is the V belt and the timing belt, the same, my car's V belt snapped but the car could still start but it showed the car not charging

Thanks for making this video

Hi thanks for sharing such informative video very precise I have a question do I need to remove the cam gear in order to remove the cam sensor

I wish I can find someone like you near me. The guys coming over to see say that they couldn’t do it without getting under the car, ie ramp. The car is sitting on my driveway 😢

Damn, what a mission. Everytime I think I can do this myself, I come back to your videos and immediately decide this is a job for my mechanic 😂. But I enjoy watching these nonetheless, thank you.

Nice video, the cut before the panel fell off again had me rolling 😂

thanks man,very helpfull

Thanks Willem, very informative, I’ll be doing mine in the morning 👌👌👌👌

Thanks great help for changing my damaged wingmirror and how to access the connections 👍🏼

Hi Willem, my belt starts making a noise only when I turn sharply in either direction. When the wheels are straight there's no noise. Could it be a tensioner issue or maybe the belt being stretched?

Great video thanks, did you support the engine when you removed the mount?

Hi Willem. I have just bought a 2016 amarok. It has the updated cover around the serpentine belt. There is a whining sound and an unpleasant harshness which changes with rpm and increases with power-steering load. It also increases as the alternator switches o n and ramps up after starting the engine. I suspect a worn out serpentine belt causing vibration and micro-slippages on the pulleys. I can feel the micro-slippages through the power-steering feedback on idle. I have had similar micro slippages and whining happen on a BMW i had long ago which was solved with a new serpentine belt. In your opinion would this be related to the belt only or a combination of the belt and tensioner?

Thanks a lot for making this video. Very helpful.

Although I am fairly versed with working on VWs the first part of this was a bit tricky. Thank you very much 🤙

Thanks for the video. Do you perhaps know where the reverse light switch is located? Seems like my switch is faulty.

Just finished changing my battery thanks to this video.

Great vids I'm doing my own clutch currently I find some steps not needed bu I thinks that's mainly because I have diferent tools like I never had to remove the engine mout to get the starter off and the bolt under the starter for the bell housing

Just wondering why you have to put engine in top dead centre for the rear main I have my clutch to do I plan on replacing the rear Maine

50,000 km is ridiculous.. Mine went at 185,000 but it also damaged the idler. I tell you what, removing the front cover is an absolute pain the ass. Took me hours, I had to cut a screwdriver, grind it back to thicken the flat edge, and clamp it with vice grips. So far I haven't had to remove any coolant hoses. Waiting for new pulleys. I though it was my alternator pulley that was noisy, so I bought an alternator. Mind you the alternator pulley does have a wee bit of a tiny squeak to it, but flows freely and clutch works really well. So I will change it, just in case.

Very helpful

What size spline u using on the flywheel too take it off

Hey man, how do I locate engine mount on amarok 2014 tdi 2.0...I can't get oil pan out. It was leaking before ... after undone I can't get it out... Please help me as to how to locate the engine mount so I can lift the engine to access the sum and clean it out...

You need use the computer programmeing software to enable ignition sence for the radio to power on using the gpio pin 10: …

I have 1 to do tomorrow wish me luck

Thank you for making this! Using it real time while changing out my battery😂😂

I'm surprised that the German engineers envisioned the removal of the engine mount to fit one F'ing bolt.

Nice one ,I think the manual states the the light can be removed by gently pushing it back. That is why people are having trouble I think.

hola, puedes indicarme cuantas libras pies de torque le diste a los tornillos de flywheell ?

At 1st glance it looked like a big task to replace the battery on my Amarok but your video made it easier by knowing what to expect and where to loosen everything. Thank you very much.

Wheres ya shoes sir 🫣🫣