Видео

No, thank you. My channel is about learning, not about flowery BS. I don't need to show closeup of clowns and catchy titles that has nothing to do with my videos.

Great!

It worked for me

That's odd. What browser are you using? Try a different browser.

@@efrenplaza Tried with Firefox first, no luck, tried with edge after, still no luck...Help Plz

@@immenseTie did you try using Google chrome?

@@efrenplaza google chrome is no luck either

@@efrenplaza tried with Chrome: no luck either.

Did you follow exactly this video? The size of USB drive formatted to FAT32? Did you download the correct BIOS for your motherboard version?

Yes, lots of memory.

It's been a while now that I played with SQL because not too many are interested with it. Judging from the error, maybe you are trying to connect to a SQL Server instance, but the account does not exist or have no rights for that instance. Make sure the user has admin rights when logging in to your windows workstation or file server where your SQL reside.

Glad it helped!

Isn't it ridiculous? Anyway this is what my channel is all about. I create videos like this to help others and also, so I don't have to go through it again.

Sorry to hear that! It works just fine on my system.

I installed GNS3 on VMware Fusion 3 years ago. It was difficult to get it running because they were version specific. I have to mix and match the versions of application that will work. If you have downloaded the latest version of Fusion and GNS3 and still unable to get it to work, I suggest to install them on Windows OS or Intel based system.

This video was created around 3 years ago where there were far too many issues from compatibility, versions, and so on, just to get up and running. I'm hoping that these issues should have been fixed by now. If not, it's better and a lot less headache installing it in Windows. If you already have a hard time installing this system, what more if you have to design or simulate an entire network.

Did you download the correct BIOS for your motherboard?

What are you doing? Updating your BIOS when you got the error?

I haven't work with Cisco for awhile now but what's going on?

BIOS (Basic Input/Output System) is specific to the motherboard rather than to a particular microprocessor. The BIOS provides the fundamental low-level control for hardware components, including the interaction between the operating system and the hardware. While the BIOS does interact with the CPU, its primary function is to initialize and manage the motherboard's various hardware components, such as the chipset, storage devices, and input/output interfaces, rather than being tied to a specific microprocessor. Updating the BIOS to the latest version can be beneficial. Manufacturers release BIOS updates to fix bugs, improve system stability, enhance compatibility with new hardware, and sometimes even boost performance. I always update my motherboard to the latest BIOS particularly when I'm having unexplained issues with my computers. If you talk to a Tech support, the first thing that they're likely to ask you, if you have the latest version of BIOS.

@@efrenplaza My motherboard came Rev 1.2. Why should I update the BIOS? And what version of BIOS do you recommend? Should it always be the last one available?

Are you talking about the Task Manager? If so, sometimes when you can't run Davinci, it's because it's already running. You have to shut it down by selecting the app and End Task this from Task Manager

Thanks! Okay, I'll wait. Hey, I gave you an outstanding review. All 5's, including some (bolang) comments that you went above and beyond your job description. lol

Great!

Although I've never done it, Certain Gigabyte motherboards support a feature called Q-Flash Plus, which allows you to update the BIOS without needing a compatible CPU installed. This feature is particularly useful when you need to update the BIOS to support a newer CPU that the current BIOS version does not recognize.

@@efrenplaza thank you, I was interested in that Mobo but with 14th gen ready

@@unknowsisoi7866 idk if you got your mb already but you can use q flash plus to update to 14th gen that’s what I did with my 14900k

You're welcome!

Welcome

I created this video for Mac M1 only. Yours is Mac with Intel processor. I just looked at the VMware website, the latest version should work on both Intel and Arm based Mac. So Download and install this latest version and follow their procedure. Fusion 12.1.2 and earlier The following processors are supported. Processors on all Macs launched in 2011 or later except for the Intel® Xeon® W3565 processor when used on the 2012 Mac Pro Quad Core Processors on 2010 Mac Pro Six Core, Eight Core, and Twelve Core The following Metal host graphics rendering engine requirements apply. Hardware Requirements MacBook, Early 2015 or later MacBook Air, Mid 2012 or later MacBook Pro, Mid 2012 or later Mac Mini, Late 2012 or later iMac, Late 2012 or later Mac Pro, Late 2013 or later See support.apple.com/en-us/HT205073 for information about Mac support of Metal. Software Requirements macOS 10.12.5 or later macOS 10.15 Catalina and newer versions for the host OS. Operating system installation media (disk or disk image) for virtual machines. Windows operating systems are available separately from Microsoft and other retailers. Important: Fusion does not provide any operating systems for installation on virtual machines that you create with Fusion. You must provide the operating system installation media. 4 GB of memory, 8 GB recommended. 750 MB of free disk space for Fusion, and at least 5 GB of free disk space for each virtual machine. Note: You must have enough memory to run macOS, plus the memory required for each guest operating system and for applications on the Mac and in the virtual machines.

Watch the video.

Thanks!

It's been a while but the previous video showed you the Headquarters building. The Multilayer switch is in the ISP/Telco building.

Sampling Rate and Buffer Size in the AXE IO interface follows the settings set in your applications . You don't set Sampling Rate and Buffer Size in AXE IO interface. What ever sampling rate and buffer size you set on applications such as Amplitube 5, Digital Audio Workstation, Reaper or video editor, Davinci Resolve Studio, those will be the settings of your AXI IO interface.

Well, it's been awhile. This docker network has already been deleted on my GNS3.

@@efrenplaza can i setup dcoker0 bridge to use /24 subnet mask?

@@jirehla-ab1671 Sorry it's been awhile, my Docker network has already been erased but It's important to understand Docker default Bridge network interfaces.

Yes, you're right, I didn't see rev 1.1 either.

Z790 AORUS ELITE AX (rev. 1.1) is no longer in Gigabyte website. I've just upgraded my motherboard, Z790 AORUS ELITE AX (rev. 1.1) BIOS using Z790 AORUS ELITE AX (rev. 1.x) from version FDd to FH. So far it's working good.

Your frustration and inability to get your system going don't take it out on my video. How can you fake a video like this? If you noticed l've mentioned the versions of files needed because at this point in time getting this to work was version specific.

Ha-ha!

Maiha na, hindi ko na matandaan, pasensya na la baying.

@@efrenplaza ok la po sir ..basta it na m tuna mayda interesado nakadamu na pasingadi haak pagpakiana, ginsugo man ngani ak ni ma'am Aida magmessage haem Facebook kaso dri pa nim ginseseen ak message

@@WarayEnglishCoupleVlog diri ga ubos nga tuna hatag ko la iton kan Don don. Basta kausapin nyo na lang si mana Tessie.

@@efrenplaza sir nagkita po kmi knina ni mana Tessie didto han Iya trabaho kinadto ko po hiya,,an presyo nala it ginhuhulat ak buyer Kay waray pa hiya pagsiring haak han presyo po..salaamat sir plaza..

@@efrenplaza napakiana ngay an hiya kun san-o ka daw anay mabakasyon..?

oo, magpakiana na la kamo kan mana Tessie Plaza ha Borongan.

@@efrenplaza ok sige po, sir plaza kakadtuon ko nala po buwas, haen po it balay ni mana Tessie?

@@efrenplaza maaro Kunta ak hit number ni mana Tessie kun pwde para makaistorya ko po hiya..salmat po sir plaza

Its been a while but it doesn't hurt to try. My laptop with 4 cores and 32 GB memory was already very slow. The router also requires will require more memory.

I'll definitely do that. Its just that I got too many projects lined up but we'll see. Thanks for your support!

I have this guitar! My only thought: the pickups, along with all the mahogany, gives the guitar a pretty dark sound. On my Fender Blues Junior, I had to dial out all of the mids to get a brighter tone. As cool as these pickups look, I will probably try some brighter ones. Otherwise it’s a fantastic guitar!

I just got this guitar so I have not played it much nor cranked the volume up. I recorded this song the moment I got it without any adjustment, connected it straight through my AXE IO interface to Reaper. I did not notice any hum when playing the guitar but what I've noticed though is when you touch the master volume knob without touching the strings I get a buzzing sound. Just on the master volume knob, other knobs are okay. I think I've seen this issue before when I built my hollow body guitar and to fix it was to ground the bridge to the volume casing and that's a lot of work.

If you cannot open Waves Central, try to uninstall and reinstall it.

@@efrenplaza did this many times

@@kapilkevlani1079 did you run the installer as administrator?

I don't have the z790 aorus master motherboard but it should be the same process. I suggest before upgrading go to your BIOS screen by tapping Delete, as shown in my video and get familiarized with the Menu. Look for a way to save your existing BIOS. Save it before upgrading. Make sure you download the correct BIOS for your motherboard, z790 aorus master.

@@efrenplaza keep getting BIOS ERROR CHECK ID ? I currently on BIOS FG version means i have rev1.x (1.1) i am trying to to upgrade to FH version but it fails I am using a 15GB fat32 usb flash drive, move the thing main file Z790AORUSFH to the root of USB still it fails.

@@YashvirGaming you may have a revision issue. Can you visually verify your motherboard rev is the correct BIOS revision you downloaded.

@@YashvirGaming I'm looking at GigaByte, USA website. There's only one z790 AORUS MASTER and the revision is 1.0 and its latest BIOS is version F12. There's no motherboard ver 1.x nor BIOS ver FH.

Glad you liked it!

BIOS updates are based on your Motherboard's version and not based on your CPU. Go to Gigabyte select your motherboard and ensure you select the correct version, which is located on your motherboard.

You're welcome!

Thanks for the comments, I really appreciate it!

Leave 1/2 for them, start the kick at 3/4 and go from there

It should, but I have not tried it yet. Waves has a version for Mac that came out on November 2023. Here's a summary, How to Install and Activate Waves V9.92 Nov 08, 2023 To install and activate Waves V9.92 plugins, use the following offline installation procedure. Important Notes: V9.92 plugins can be activated by Waves Creative Access subscription licenses and perpetual (non-subscription) V14-V9 licenses. Products released after May 3, 2018 are not part of the V9.92 installer. To check if a plugin exists in the V9.92 installer, visit this page. Sample libraries for Waves instruments must be installed manually. For V9 SoundGrid Applications (SoundGrid Studio, MultiRack, eMotion LV1, and StudioRack) - please use the V9 SoundGrid applications offline installer. This article covers situations such as: You have newer licenses but need to install V9.92 software due to system requirements. You have V9 licenses and wish to install V9.92. On Windows 7, Windows 8.1 and macOS Sierra (10.12) and below: On Windows 10 or macOS High Sierra 10.13 Here's the website: www.waves.com/support/how-to-install-waves-v9-92

thanks bro youre awesome @@efrenplaza

I appreciate your nice comment! Thank you!

I will always use the latest BIOS for my motherboard.

No problem

Thanks Bro!

Glad you enjoyed it

Are you sure you downloaded the BIOS for your motherboard?

you have the wrong BIOS version. Make sure that you have the correct one and try again. Be aware that there are Elite AX, Elite X, Elite DDR4 and many more including revisions. You need the exact one fitting your motherboard. bios ID errors are there to prevent you from destroying your motherboard with the wrong bios version