Видео

@Jon-dz2cl this was bare body only, wearily they don't offer this with batteries as a package in the uk!?

Buy it bro, they either sell tool alone or with one 2ah battery and charger seen for 198eur. You may find cheaper. Worx seems won in this tool. Makita choose cheaper version, milwake made horible tool. Worx did great my mom pro with plants loved it. She started pruning 3times biger branches than in video with my very old bateries. 1,5ah battery ok, but pick 2ah battery same size bigger battery too heavy. It will easily cut fingers. If branch is big click coyple times and it will do the job. Also ir has option to make scisors biger or smaller useless iption not using. Open fully. Irs with button to cut. Buy great tool.

@kevingadson9315 2 years now solid 24/7 running, I can report back it still works very well, it does make some funny noises every now and again and seems to be dropping a degree or so on 30°+ days in the van when left on batteries, internal is still in great shape me and my wife have cycled somewhere near 200 soft drink cans a month through it, I have distributed about 20 cases of water on hot days to my team and it also has done our camping holiday last year in Wales, and once as a substitute freezer when ours needed defrosting, all in all I have worked it as hard as is physically possible, I dint think worx ever expected someone to run it for 2 years 24/7 maybe occasionally but never constantly! :-P I did Need to defrost it once when I put in some very warm cans and it created a huge amount of condensation that then froze. Other than that a monthly wipe down with a microfiber cloth sees it great.

@@mikesptworld that's good to know 2 years is a long time for everyday use i only had mines for a few days and the paint is chipping on the inside of the cooler trying to contact worx tomorrow

@kevingadson9315 just remember tomorrow is a bank Holiday and I doubt they open then :-P even I get bank holiday off :-P

i was always taught a micrometer is like a horse shoe with a screw going through the top with about 99% made by moore & wright, and being about 50+ years old; place material uder screw then screw down and take your reading, a vernier caliper is a sliding jaw set with either digital or manual reading it has ability to measure external, internal as well as using the tail to measure depth too, they are tpically less accurate than micrometers being only accurate to within 1/100th of a mm where as a decent micrometer can be as accurate as 1/10,000th of a mm.

me too, i must have got an older version

Seriously? That’s insane! Definitely a red flag. WTF Worx...

Yes, you can. Anything is possible with enough patience, I personally wouldn't reccomend it based on the stress factor involved :-P

Hey :-) the nitro range now comes with a 5 year warranty and the brushless motor is backed by a 10 year warranty, just make sure you register within 30 days of purchase, :-) with regard to the battery mod.... probably not without fairly extensive modification. The wg633 comes with a waterproof battery case enabling it a higher ip rating you would need to explore removing the case and modifying it leaving behind the contacts removing the water proof box, if you did this it would likely void the warranty - that said a 5 year warranty is pretty strong so take it as a bold confidence boost to the quality of the products. I have over 70 worx tools and have had 2 arrive DOA, both were maker x products, one a soldering iron with a misaligned screen the other the mini angle grinder that worked for two seconds went forward then flay out backwards and stopped!? both were replaced within 3 days, all the other tools, mowers, batteries, chargers strimmers, chainsaws DIY tools etc all still work just as well as the day I bought them, some have cosmetic wearing and dirt in their crevices, and some have scuffed and faded writing and labels but on the whole still function and are just as powerful as the day they were made, overall are amazing for their cost vs longevity - a fact that I can only see getting better and better over the years I have had my worx tools. Indeed the wg633 is now a good year and a half old now and it is still strong as an ox and works just as good now as it did when new (probably upwards of 90 x 4ah batteries used through it including fence panel prep, car and bike washing, patio care and hot tub cleaning along with filters and internals too.

@@mikesptworld Thanks you for your nice reply. I ordered wg633 today :) so it is better to buy additional worx battery, some changes and modifications make in the future when guaranty ends.

@@JustxxxRaV its worx nitro so if you register it within 30 das of purchase you get 5 year warranty......... you may be waitin a while!!

@@mikesptworld yes , true long time. To use my dewalt batteries I ordered one more tool: dewalt vacuum dcv501 :)

​@@mikesptworld Mike, there is no wg633 on the products list to register my nitro worx 😢 The serial number and purchase date is correct.

Dried paint is far more entertaining though especially when it starts bubbling and blistering! :-D

just using a pre adapted hose is probably smarter option. though when i get my overhead extractin tubing system in place it may be a smarter option though for an average joe setup this is more than adequate, i mean if you have a 6 foot tal dust extractor then you most probably also have enough room for a smaller size shop vac too 😛 - the bag it comes with is sufficient for most peoples use. you will always get dusty, it is nearly impossible to negate every last speck of dust - if you know of a way to make wood work meet a rolls Royce factory then please take my money! :-D

Define 'power' it has a more powerful brushless motor and chucks a bigger diameter twin string cassette compared to the wg163 with it's single string casette, it will run for approximately 30minutes on a full 4ah battery. I use it to do approximately 400m of the perimeter of my property, and it does it just fine. It's very capable and an ideal upgrade to the wg163, it is just that though an upgrade, rather than a brushless version of the wg163

@@mikesptworld thanks....how i understood it slightly powerful against wg 163...that is what i need..20% more power will do the job

@ivangolem1459 it's about 50% more power in Fairness to it! :-P

@@mikesptworld really...then it's more than perfect... thanks again

It has real easy one touch removal, small keyway on the base, flick it open and the brush and one end cap pulls straight out, super easy, it has spiral cut outs to run scissor blades or the hilt of a knife down to clear it off, though generally speaking it's only real long human hair that ends up wrapping round the brush.

I am so glad you find yours so handy, I was using mine to trim some brambles at the back of my boundary fence...... I then realised "some brambles" is a pile 8 foot tall.... the secateurs had used 1 of 5 bars of battery :-)

😆 if you use excessive pressure then yes it will stop, it's like trying to do a burnout in a ugo and claiming it stalled because the engine wasn't powerful enough, it's about portable convenience, its not a mains power substitute. One day maybe but not today.

Sounds like a primary fuse has blown though I have never experienced this first hand I have noted in the new batteries they feature a fusible link between the positive final terminal and the main board has a narrow section to act as a fuse if ultra-high current is discharged. Any battery post 2021ish has this feature I believe. Another thing that could have happened is the commutator on the brushed motor could have been fouled - a simple(!?) Strip down and electrical contact cleaner spray could solve it or if the brushes have been singed then they may be sticking in their tracks, another job for isopropyl alcohol or contact cleaner and a gentle swipe with fine abrasive if the brushes are removable to remove any burrs, after that I am a bit out of ideas, apart from looking for SMD's or following where the uncapturable white smoke has come from I am at a loss, poor soldering connections, loose wires, attempt to trace the circuit..... long arduous process after that I fear,

www.ebay.co.uk/itm/235555090230?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=qNQKS0orTka&sssrc=4429486&ssuid=eFMOgh4XRbi&var=&widget_ver=artemis&media=COPY Assuming you are uk based, try these :-)

@@mikesptworld I'm grateful for the link you've provided, thanks. I'm just a bit wary of using an unbranded product. Might it affect the warranty? May I ask if you've had to replace the spool yet? Sorry so many questions! It's just that I ordered this grass trimmer yesterday at what appeared to be a bargain price. I believe that the machine does come with 2 spools supplied, but I have no idea how far they'll take me? Just to be on the safe side I thought I'd stock up with some extras in advance, but it's proving harder than I thought!

I can't honestly say for these exact ones, though I bought some (6) for the wg163 that were aftermarket specials - 4 years later Iater I have given my wg163e to my father in law and still have 2 reels left! In honesty I only managed to use 1 reel a year! Though the wg173 is a bit more of an animal, I am still on my first reel :-) these are the ones I have earmarked for purchase, they don't affect warranty as long as they are classed as a consumable item much like petrol in a car, you can also keep the old reels and re wind your own reels with 1.65mm cluparis trimmer line, though the pre wound ones tend not to self bind and lock on the reel as much.

In my use I fond they max out right at 26mm so are bang on par for their claims.

I have not seen them for sale separately yet myself, well worth while as the wg761 is certainly a beast to behold!

I have used a 4ah and a 6ah, they both fit and work, are rather heavy on the unit and compromise that ultralight feel - honestly the battery feels like the heaviest part - this weight is then doubled with a 4ah and a 6ah pack (weirdly they weigh similar weights - see my battery video for more details) the only down side is they don't fit in the upright charger slot with the 4ah pack however it does fit in the above charging slot though if you own a 4ah pack you likely own other worx tools so have a stand alone fast charger so this really is a matter of minor inconvenience.

@@mikesptworld thank you for your reply. I’m glad to know that the other battery amps works. I have nitro share and I mostly have 40v 4ah batteries. But I also do have some 20V 2ah powershare ones too. I’m excited to try it. I’ve been using a handheld that only lasts for 20 minutes. I actually spend more time charging it than using it. The one I bought from worx is just the tool only because that’s the one that was on sale. I have more than a couple chargers and a few of the 4 Ah/2 Ah so I think I’ll be covered.

all you need to do is to unclip tyhe orange shield from the base of the head, it should be fairly easy to locate as the buttons / recess presses are on the side of the reel near the exit holes, remove that and either manually unwind or push the small black nub on the side of the rrel to allow the reel to move forward a little bit and dispense a little more line for you to thread through the hole, failing that remove the line, unravel a small length and thread it back through the holes, make sure you put the orange case cover back on too. hope this helps, Mike

Hope it is right for your use, I have certainly not had any issues with it. Its insane chain speed and virtually no boflg down even if you push on it with your full weight - which in my case is alot :-p certainly a flagship product.

Many thanks for tgevpositive vibes :-) I do think it is slightly non descript in the instructions - I struggled to muddle through it myself so I thought a video may help a few consumers out :-)

I'm so grateful for your comment and I am glad it helped and was of use to you :-)