Видео

Thank you for making a video about automatic transmission fluid change. All the others vids just focus on manual. So thank you for that 🙏🏼 Like 👍🏼

can you send the link to the speakers?

Hey I could use some help. Has NOTHING to do with terminal but just power overall. I’m having a surging issue. I can’t seem to figure it out.

I actually have a 94 Civic Si hatchback that has a B20Z swapped in, so looking for correct parts can sometimes be annoying on these apps. I bought the filter for the 2001 CRV that the engine came from. Fit perfectly. Only thing is, my fuel filter has an entirely different bracket attaching it to the vehicle, so it looks nothing like the video. The filter is actually completely horizontal with the top end on the right and the bottom end on the left. Previous filter was VMS and we found out how poorly made those are. Was leaking and making whistling sounds after less than 6500 miles. Anyway, the video was still helpful!

I just did this to my car. Afterwards, I decided to change my D4 light that has been burnt out with the D3 that isn’t used. Once I did this, I noticed the gear shift lights on the dash only work when the headlights are off. Do you know what might cause this problem?

Thank you very much. Looks like you covered everything with the camera work being excellent showing every step. John 3:16

Great job bro 😎

She’s a beaut! You want to get that back window changed to glass. Much better view.

Thank you so much for this tutorial. You are so thorough, great voice too. I am going to come back in a couple weeks when I install a double din in my 95 M edition. But I’m going to get a frame so it looks OEM as possible.

video helped a lot thank you , need to do mine for some reason everytime i stop my rpms go up and down from 1k-2k until i’ve fully stopped.. any ideas what it could be?

what gear do you check the oil levels in, neutral or park?

I already know how to do this but this helped me to know what to expect when I start working on my van .. thank you for sharing.

Can you do a full tutorial how to remove front and back driver side doors??

Use a magnetic

Clean Civic, props to doing your own fabbing to getting it installed!

Why does my check engine light stay on when i install a led? On the video yours works like normal

Good job 👍

The link for de led 👍🏼🙏🏼

Omg thank you so much!, first actual good vid about changing automatic transmission fluid I've found, plus you explained everything very well, I thank you for that sir

Great video can you put links for the equipment installed?

Great video man

Did the original radio still work? If so, how much do you want for it? Thanks.

such a helpful video man! could you show the links where you got the harness and head unit

This is the exact noise am getting on my z did you ever figure out what the problem was?

What a useless video

Dizzy recording…

Did it make this sound with the clutch pushed in or with it left as is. Mine is making this exact noise now. And im certian its the throwout bearing. Also should mention its a 6-speed manual.

Bro… talk about getting dizzy watching this!

I had I question bro, I noticed how we didn’t really get to see how you attached the blue wire on the positive terminal and I wanted to know how you would do that? Right now my blue write has the writing exposed and I places to touch the positive battery terminal but I don’t think it’s placed how it should be. If you have any advice or could refer me to a video it would move much appreciated bro

Torque specs are 25 lbs/ft. Thanks for the video.

Way too much for all that lol

Why did you run it to the ECU when there is a fuse panel by up by clutch panel. Can you pull power from there?

0:07 not the air fuel racial sensor, those were outlawed in 2020 nooo lol

The "possessed" noise at the beginning was absolutely comical! This upload came the perfect time. Now, I know aftermarkets are feasible without paying for OEM. I highly recommend you use a "body-cam" setup. Maintenance/upgrade work like this awesome to see up close, and catch all the little stuff you're doing. Us regular folk appreciate you sharing your knowledge.

The rear speaker is 4"

My Grandson and myself done this on his honda. Stopped the chatter. If you have to tighten the gap it causes the valve to open sooner, open more and open longer. Not much mind you, but enough you will notice a big difference in performance...

How do I know what injectors I have? They are off a b series or d series they are Kehin oem brand with tan light brown spray tips.. I know y8 are dark brown so doubt it’s those

If u still have trouble getting fluid to flow. The. Adjust free play rod country clockwise a few turns which will make more pressure when u pump the pedal. Do the procedure as mentioned then when done adjust the free play back to spec.

Its better to pump pedal while bleeder closed, then crack open just a lil bit. Not too much. Pump 5x leaving pedal down when at count 5. Tighten bleeder, refill fluid. (Repeat process 3x) Then done.

i only found this video by trying to figure out where one of my clutch line brackets go for my swap. so you did me a solid there. But oml i was crying watching you bleed that clutch lol. remember to keep that bleeder screw closed when pumping it up. then while the petal is held down then crack the bleeder screw open to let the air out of the end of the line. repeat until you have a good petal feel or no air in line. bleeding brakes is the same process

Any one know the cruise control switch bulb size , I can’t find any led bulbs that small . Tbh they’re even smaller than the climate control ones

Can you please slide over the settings you used on the welder?

Why didn’t you just use the O2 sensor hole and replace the old one? I have a 99 running one o2 at the header and all I did was buy the wide band o2

Hey Mate. Thanks for this video. Did you have to use acetone at the back of the gauge faces to get rid of the amber hue?

Small washer is for the bottom connection..If you check it looks like a cone there. That's where the copper ring sets, sometimes old ones are stuck from the olde filter when removed.

Thank you for telling me how to depressurize the fuel tank. It may be obvious to some folks, but I am not one of them. Another video mentioned the need for this but did not explain how, so I was glad you did.

Why did you put new injectors

I am also having a hard time removing cover. And i dont want to break the panel cover

The “ phone drops” are fine you still helped explain and show to to remember be them, i just did my really easy and quick, thank you happy early thanksgiving 🎉

El bulbo original es T6.5. Se les puede poner T5?. Quedarán?. Todas.las luces que iluminan el cluster son del mismo tamaño?, sin tomar en cuenta las de los indicadores.