Видео

Can I use this mode to test alternator??

I just measured my plugs today . All 4 of them show as if there is no continuity. I measured by touching the end of the plug with the red lead and the negative terminal of the battery with the black lead . What would that mean ? The car starts , it doesn't rattle, no bad idle , no lights on the dashboard.....I am confused .

2013 model kuga için bi resetleme alabilir miyiz ? bu olmuyor

Close, but no cigar. My 2020 Lincoln Corsair (American) is similar, but the buttons on the steering wheel are different. Also, mine is a SYNC 3. Wish I could find someone with something similar that could show me the way.

Nice to see content on the newer Ford vehicles

I can't understand what this function is for, initialization of what, what for?

So why didnt forscan read all the modules as i cant find apim on mine

The voltage on my 2021 puma is low, ive charged it, would i benefit from doing this?? Or is it just when a new battery is installed?? Thanks 👍

👍👍🇩🇿🇩🇿🇩🇿🇩🇿

Cheers for the video mate. Had stop start issues in mine since 2021 and did this yesterday on a whim. Now all working fine again, appreciate it!

Thank you so much for the video 🙏🙏🙏

I had the same problem . Stripped timing belt tooths . I timed the engine the fuel pump . Now it cranks but won't start. Does anyone knows why is that ?? I dont think it has broken valves because this engine from what i heard is a non interference engine more precise 2.0 tdci 7tma

Thank you, very useful video. Putting it back is somewhat harder than removing it!

Thanks for this info found it really useful good video 👍🏼

Mine doesn't work. Maybe American version is different?

If you have the 13.2 inch screen and the B & O audio system and the above does not work, here is the solution; 1. Press the START button without having your foot on the brake. 2. Press the power button on the center console to turn off the Infotainment system at the same time you press the VOLUME DOWN buton on the left side of the Steering Wheel, hold them until the dash goes blank and the Speaker Test starts. This puts you in Bezel Diagnostics mode. You can go to Display Test and select it, this will leave a choice on you menu screens to go into the test mode whenever you want, without repeating the above steps.

Thanks!

Biri bunu bana türkçe anlatabilirmi çok acil lazım teşekkürler

Hi Dan thanks for sharing. i have got this issue on my ford kuga 2017. how do I connect my laptop to the car? do i need a cable or is it via wifi?. sorry am not tech expert.

Thank you.. Just changed the battery...... This saved the day for us. 😊

Lifesaver! Cheers 👍🏻

Great diagnostic and fix. I have a similar issue for the exact same car. Where about in London are you? Thanks

Can you change the theme to a different vehicle like sync 3

Hello, I did run the initialisation, but it doesn't work. My motor has been replaced, is it possible to causing the problem?

I have an escape 2018 but similar issue. My sunroof does not move forward or backwards at all. I tried to reset it and when I press the button to close i hear two click and nothing else. Any ideas?

Semmi nem latsik

Thank you for this very helpful video!

Does it work on Kuga Mk3 2021? My driver window won't go one touch UP, but goes down OK and all other windows are fine both ways.

Is there a way to disable the start&stop? I hate it

Hello I’m having the same problem with my car, would you be able to repair for me

What a star!!

I've just tried doing this but it doesn't seem to do what it does in your video 🤷🏻‍♂️. When I've got it on vent, I press the close button once and then press it again and hold the button(way past 20 seconds) and nothing happens.

I have SBS and SCBS and parking brake and Camera sensor malfunctions on my CX5, but the only code shown is P0504, nothing else. The switch seems good because it turns on the brake lights and the pushbutton start has no problem. Any ideas?

Hi, I just did mine as it had a leak, only took to top cover off and pinned it now just wondering if I should have made sure the bottom lined up aswell. Like 180 out might cause a problem??

Thank you so much. Been sat in my car for half an hour trying to do this!

Great vid

Hi do you think that’s what I need to do as my brake light just stays on. And I have too keep lifting up with my foot to cancel the brake lights

I've just reset bsm on my 2020 st focus and straight away auto stop and start is working and smart locks on both doors are working. My battery is 3 years old so should have set bsm as my cars bsm will think my battery is new ?

Might be a stupid question, but where does the black multi meter wire go? So the red multimeter is connected to battery ground but not sure where the black one goes whilst using the test light on the plugs.

Good

My 2012 Kuga does this but also sometimes won't say key not detected just does nothing. Any suggestions?

Does it have Bluetooth?

Brilliant video as always Dan.. very informative!

How did you manage to get all the options for the service procedures ? Many Thanks

Would this fix the global windows ? They open on unlock but don’t close on lock

My 2021 Focus has a near identical issue, but when this warning comes up on my screen, it's usually followed by a warning straight after about the collision sensor. Drives me nuts, as it can be fine for days without any issue, then it might happen up to around 100 times in a 2 hour journey.

What a bodge

Brilliant video and thank you however,not sure how showing how to donthe module initiations would be against copyright, showing the drawings i get but not a video demo/tutorial on how to do it! Regards Jay

It's getting the light back on that's the hardest !