Видео

like two weeks ago just wrecked my q60 it was my pride and joy it made me a bit happy to see this always remember to enjoy your ride man

Yeah get it fixed if you can and sell it, I would buy a g35 like you said a Nissan

Ah yes stick to random transfaliure compared to lack of maintenance makes sense even maintained wouldnt own a nissan its a while different car for a whole diffrent use case bmws are build well kinda sometimes but nissan hasnt made a single good car since the early 90s and even then it was a sentra ser

goated video haha did you use an automatic ecu? if so what are the steps to run the manual transmission? im just confused on that part

Wish I could remain as chill as this dude when working on my cars lol

❤❤❤❤

I'm converting my 2008 G37 to manual, can I use the same engine harness with my ecu?

Thank you Sir for the very informative tutorial/guide - from Singapore!

Coming to a local takeover near you 😅

Could you post the link for fuel pump part?

Great video. My Truck had trouble starting after driving on E for a period of time. I filled the tank up and drove somewhere. After stopping and later trying to start up and leave, the truck just wouldn’t start. I’m guessing it’s the fuel pump, but what are ways to determine if it is or not?

😂😂😂😂💯💯💪💪

I went skimboarding with a sheet when Gustav hit LA in 2008. Almost got blown away cause my dumb ass wanted to wait till the winds were at least over 40 mph.

That lip would fit perfectly if you had the other g37 stock bumper

That lip would fit perfectly if you had the other g37 stock bumper

need torque specs

Thank you for the comprehensive explanation and to the point.

Hi there, thanks for uploading. I replaced xenon bulbs and the coil started not working. First question is there any relation with the bulb installation, second is that can someone damage it easily intentionally, if yes how to prove it? As the third and the last, is it possible to fix the coil or replacement is mandatory?

My odyssey driver said fan working on low speed I replaced with new fan motor I checked all raleay and fuses also wiring and connectors but still I couldn't find the prablom

Great product Great presentation 👏👏👏

Oxilam🔥🔥 what a difference thank you!

Good job prol

Your g is coming together well man, I know paint is the LAST thing you're gonna do but it seems like that's all it needs from what I heard 💯

Great work

facebook.com/groups/477015521884614/

This with the most helpful thorough video, thank you so much. And thanks for including the links

So with the flock you have to have someone apply the flock as you lay down the glue. The glue drys extremely fast in heat and that’s how we were able to get the best results. Also as they are fallowing you flocking right after the glue is down they really need to lay it on the bigger applicator Is better and use a ton of flock since the excess blows/wipes right off. And scuffing the surface helps the glue stick better Also when using paint you really don’t wanna mix different brands and types because they react especially in a short time Ruel of thumb is use the same brand and type of paint and to read the instructions and try to fallow them the best you can Also wait 48-72 hrs after it drys to let it gas off as much as possible so there’s no reaction cheap paint in a can is not like a 2 stage paint with a hardener I think the dash came out pretty dang good I’ve repaired a ton of dashes especially from all the 240s I’ve had over the years 😂

Is that a t3t4 turbo 👀

🔥need this kit

Thank you 👌

Good job

Also if you noticed, the Autel is faster in executing commands than the snap on.

I purchased the Autel MK808s and even paid for the additional update costing me $129.00. I connected this to a 2021 Jeep Gladiator Rubicon to check the Stop.Start system to see which battery was at fault. It only shows Battery Charging System. Next, I wanted to if the Autel would find the fault for Rear Locker and front Locker. I connected a friend Snap on Scanner and I couldn't believe how the Snap on picked the faults!!! My shop is small so I couldn't afford the Snap on. I also connected my other friends Icon T10 and doesn't do half what the Snap on can do. I may have to spend extra money for the Snap on Scanner!!!

Pls, has Autel (maxicom MK900) finally made it possible to search for the required parameter from the Life data list? Or you still need half an hour to select the right parameters from hundreds. And if you leave the settings page, then everything starts over again... Autel is surprising.

Cool video and just what I was looking for, as Ive got an 07' Ridgeline that will be getting a new part for a weekend project. I also bought an aftermarket just because it is not driven that much. Good instructions and details that others might overlook. Thanks for posting this-

Thank you

What about if one clean the picktail with WD 40 specialist contact cleaner electrical parts for better contact? I wonder if that works before buying a new part.

Kids gunna messup that headliner

Yall can juat use a super vlean with towel it come right off

Thank you so much this is exactly what i needed!

Amazing machine 💯

🎉🎉🎉🎉🎉🎉 congratulations

😂😂😂😂🎉🎉🎉🎉

suoer helpful. thank you!!

I have the same beetle but it is 2008. When I pull on the convertible switch I hear nothing. I did the factory reset and nothing happened. Any suggestions?

I just did my vvt valve electric plug was cracked that's fixed. Now I got the oil filter housing leaking 🤦.. always something with these old cars 😂 but that's why we do what we do 💯

Hey everyone, I have started a Facebook group for the G37 community that's working on their manual swap or already has done it. Sometimes I miss comments and don't see them until later. I'm hoping with this group we can share ideas and come up with solutions together. Help spread the word! Thanks! facebook.com/groups/477015521884614/

Hey everyone, I have started a Facebook group for the G37 community that's working on their manual swap or already has done it. Sometimes I miss comments and don't see them until later. I'm hoping with this group we can share ideas and come up with solutions together. Help spread the word! Thanks! facebook.com/groups/477015521884614/

Hey everyone, I have started a Facebook group for the G37 community that's working on their manual swap or already has done it. Sometimes I miss comments and don't see them until later. I'm hoping with this group we can share ideas and come up with solutions together. Help spread the word! Thanks! facebook.com/groups/477015521884614/

Bro get your valve covers done 😅