2006-2014 Honda Ridgeline Fuel pump replacement (step-by-step)
HTML-код
- Опубликовано: 11 мар 2024
- In this video I will show you how to replace a fuel pump on a 2006-2014 Honda Ridgeline. Use these easy to flow along instructions to save yourself a lot of money by DIY.
If this video was helpful to you, give it a thumbs up so someone else can find it.
Once again, THANK YOU for watching.
Here is the affiliate link for the O-ring lube that I was using.
amzn.to/3Veg5pd 
Хобби
Great video, I have a 2011 Ridgeline and I followed your directions. But as it turned out pack rats chewed through the wires at the top of the fuel pump. I just had to splice all 4 wires back together and things were back to normal. Your step by step directions were great
Wow, that's crazy. I'm glad my video helped and that you didn't have to replace your fuel pump.
You are the 4th person this month that's told me about rats eating wires. There was a guy that needs a new wiring harness. They are charging him over $5000. You, my friend, got lucky.
Well done buddy. Very useful video. Thanks a lot
Glad it helped
Headliner :)
Headliner video coming soon, lol
Having old crappy cars works perfect for this channel! I always have something to film.
Great video. Can you tell me where is the fuel filter? Is it part of the fuel pump?
Yes, it's in the fuel pump.
@@Prolbuilds can you also tell me what the mileage of your Ridgeline was when you replaced the fuel pump? I’ve got 125k on mine, so just curious how long the pump lasts for.
@@bigboithe8th
My truck had 152k miles when I replaced it.
Great question, this is good info to know!
Thanks for watching!
Where is the location to check the pressure for the fuel pump?
You would have to disconnect the fuel rail hose in order to test it. (It does not have a test port like other cars.)
1. Relieve the fuel pressure.
2. Disconnect the quick-connect fitting. Attach the fuel pressure gauge set and the fuel pressure gauge.
3. Start the engine, and let it idle.
- If the engine starts, go to step 5.
- If the engine does not start, go to step 4.
4. Check to see if the fuel pump is running: listen to the fuel filler port with the fuel fill cap removed. The fuel pump should run for 2 seconds when the ignition switch is first turned on.
- If the pump runs, go to step 5.
- If the pump does not run, do the fuel pump circuit troubleshooting.
5. Read the fuel pressure gauge. The pressure should be 390 - 440 kPa (4.0 - 4.5 kgf/sq.cm,
57 - 64 PSI
Brush and compressed air okay?
Yes 👍
What is the chisel you're using?
The one I'm using in the video, I picked up at a swap meet years ago. But here is a link to one that looks very similar.
www.harborfreight.com/10-inch-flat-chisel-94347.html
What is the aftermarket pump?
I purchased it at O'REILLY's Autoparts. I don't remember the exact brand.