Видео

I think they did. I didn't buy mines shorty after it released though. But yeah, alot of information on matiainence was lost or ill advised

😂😂😂

Thanks man! Now, gotta start with that code

I think I'm gonna leave it as is. Tpu is hard to clean up like that lol

Still works like a charm

Hmmm there's an idea. I'll see what I have in stock. Thanks!

@@wilatheroicstudios2466 Yeah, no problem I saw another video a little while ago that showed how the longer something is, the less force it takes to deform it, so I just thought that'd work here

Welcome welcome

Thaaaaank you!

Hey man, thanks for that. This was a patreon exclusive because my patrons requested it so it's only available on my patreon along with all with the rest of the months rewards

Then when I get paid I will see what I can do. I know it's not a lot, but I have to watch my pay like a hawk. I will check back with you on payday.

@@ChefDansHookah no worries. We all have to watch our pennies these days

To answer your question, I use to do that. But it never got that glass like surface finish

⁠@@wilatheroicstudios2466Thank you for the reply. That’s too bad, i would love to have that glass like end result for some objects… Maybe it’s just not possible with printing and i will have to resort to printing, making a mold and cast it with casting resin to achieve that glass like object. 😔 I like your result though, i was just hoping to get an even more perfect result. Oh well… I guess it’s not the end of the world if it’s not 100% perfect.😅

Sounds like your wash needs to be swapped out. If you use clear resin it may clear it up, but i think what's going on is your wash might be dirty enough to deposit uncured resin on to it.

@@wilatheroicstudios2466 that's kinda my issue, on my second print i did a first clean under water, in a clean recipient and the same bleemish appeared right away. my tank an iso were cleaned and new. :/

Gotta show lightspeed some love!

I've actually moved it to the welcome gift permanently for all new patrons along with a few other things

???

@@wilatheroicstudios2466 nor a clue what this I'd about

​@@mitchellkeiser9135 that's okay. Other people know what's up lol

No prob bob

Unfortunately that may just be the quality of the resin. You check out my follow up video to this. Might help ruclips.net/video/mqVZYfbP8O0/видео.html

YEah, I got same crap happen after UV-curing. I will try same thing just putting the model outside on sunlight. The UV curing might be too harsh for that cheaper transparent resin.

You can to clean up imperfections and such

Negative. Would be cool though

@wilatheroicstudios2466 morphers turning out good btw. Painting the shells now. Worth the money.

@@PepsiChips87 nice! How are you liking it?

@wilatheroicstudios2466 It's turning out pretty good. Had to redo certain parts because they aren't as smooth, though--you must have a better printer. My cousin has a resin printer, so we're thinking he's gonna handle the coin housing since it's clear.

@@PepsiChips87 I had a few bouts with it actually. Had to really tweak my settings. Gonna be upgrading the design hopefully soon

You can do either or. Same result

There's a way to add texture in fusion but it's a much bigger work around than in blender. I did it with a few files of my own

It would be the $8.50/month [hero tier] to get this in the welcome gift

@@wilatheroicstudios2466 Word. It's Morphin' Time. Er...it's about to be.

@wilatheroicstudios2466 We're having trouble downloading the files.

@@PepsiChips87 if you're a subscriber check the pinned post

@wilatheroicstudios2466 all good now!

Yeah but this is an entirely new ultimate universe. Does that apply here??

@@wilatheroicstudios2466 Yes, Ultimate Invasion and Ultimate Universe #1 aren't about the original Ultimate Universe despite the fact some would argue they were falsely advertised as such, even the first issue of Ultimate Invasion features Earth 6160 Peter Parker being prevented from getting bit which ties into this comic. The whole introduction in the beginning of Ultimate Spider-Man is actually what I'd call a story that took place in Earth 6160 before it, though most might argue it's more so setup than a story unto itself.

Much appreciated! More painted prints on the way

@@wilatheroicstudios2466 I'm into scale modeling myself. Not the same but airbrushing to perfection is what we have in common. Also my weak spot for Green Ranger

The secondary cure is to make sure you have all the surface cured. The 360 in the cure machine ensures you did that. Using a lamp prevents it from being cured to the surface. Use a silicon mat

Lol thanks!

You are welcome! A video on how to maintain and clean it is coming up soon!

Thanks man! When are you gonna start making your helmet collection?

@@wilatheroicstudios2466 I’ll make it…eventually lol

Thanks! I have a whole collection of files of red hood. There's gonna be more lol

Yep. Patreon.com/Wilatheroicstudios

That was my aim. What do you mean by gone?

@@wilatheroicstudios2466 it’s discontinued I believe

@@jacobcastillo5688 oh wow. I must have the last of the stuff I believe lol

I didn't sand anything. If your supports are on point then they just fall right off. I have a video for that lol. And yes, any uv light will work. Including but not limited to the sun lol

Yessir! Megaman X and Zero are next!

That's why I got a new camera

Awesome​@@wilatheroicstudios2466

Hey man, the cleaning method I used was outlined in the instructions that came with the brush. I just followed what it said. I've seen people do what you said but wanted to follow the instructions outlined on this because I'm a first timer. Also, thanks for becoming a patron!

Yes, over on patreon.com/Wilatheroicstudios

@@wilatheroicstudios2466 does it cost money?

@@PepsiChips87 yes, it's on patreon

@@wilatheroicstudios2466 Uhh...how much?

@@PepsiChips87 membership to access it, plus a ton of other files, is $8.50

Yeah, which is why I don't do it anymore

I agree with this. Bambu, ankermake, k1, all great printers, but I'm more interested in how they work. If I need a model done I know they're reliable which is great. But what to do when it breaks down

@@wilatheroicstudios2466 The only frustrating thing with the Ender3, is how slow it is to print. I read about people printing benchys (because who hasn't printed a benchy...) in 15-20 minutes when this thing takes an hour or more...and I gotta admit, I get envious. Especially with other prints that are either similar time or a multiple of 4.

I agree. I love all the new features coming with these printers but I also get worried about how to fix it when and if these things go, and they will go. Resin printing is my Forte. I love it. Though I have put those printers on my garage. Messy, sometimes frustrating but the rewards are well worth it. If you need any help with that let me know

Beats me 😆

3) have you tried to print clear resin but later apply color resin? How does it look?

Hey buddy, thanks for the questions. It the resin only matters if it's the same color or clear. If you're printing with clear green, you take it from the build plate and cure it right away for the same effect. Or wash it, cure it, or use a clear or a green. However, I found a better, less tacky finish way to do this ruclips.net/video/mqVZYfbP8O0/видео.html

You are very welcome!

How so? Is there an error message on screen? Did you check the uv light to make sure that comes on?

Thanks man!

Glad i could help! Content has been slow but I'll be picking it back up soon

🙌🏼🙌🏼 much appreciated!

It's the least I can do,I am newish to printing, and I thought because I dabbled with a ender2 that I could jump up to a anycube kobra max2. Let just say it's been a learning experience.😅 But my little demo design came out looking great. Thanks man, keep posting and I'll keep watching.

@@davidforsyth4338 yeah?? The kobra max is a huge step up. Temperamental at times but she's a good printer after a bit of some tlc. I reckon the more the print breaks down, the more of an opportunity you have to learn and understand how it works

If you're looking to get some stls check out my patreon. I'm over at patreon.com/Wilatheroicstudios

I don't remember. But my go to filament these days is elegoo pla. Its cheap, about $13/roll, and looks so good when it's done