Видео

Thank for the reply! Here in Southern California a gas powered weed wacker is more common, but sometimes I wish we could slow down a bit and go back to human powered tools. Yes it takes longer, but so much better for our physical ans spiritual health in the outdoors.

Haven't had that happen yet. I don't know what it's doing, but I can hear it click back in when I turn it off at the very end of the cycle.

I haven't had that happen. I usually leave the wing nut for the oil breather open all the time so it allows the oil to breathe.

Thank you . Just wondering because it’s not like it’s pouring. It looks like it’s from lubricating the tube. Not sure how normal it is .

Great!

Thanks! Glad to help.

Thanks, glad we were able to help!

I agree. I just used the small one this weekend to clean up a few weeds popping up. It's very handy!

I agree. If I was to only choose Stihl Ultra or Stihl HP, I would choose the later, but I still like the results of the Amsoil Saber. Good Fresh gas is the key probably for all of it.

Thank you!

Good to hear!

Jtron X001KJUK2T 6-Way RV Fuse Block.

Sometimes the fuel filter needs to be replaced especially in backpack blowers. I'm thinking it might be a fuel starvation problem, hard to tell. Other than that it might need a carburetor adjustment or replacement. Hope you can resolve the issue.

sharpeningsupplies.com

No, just extremely hard wood.

Thank you! We appreciate your support!

I've never had one just slide in. You don't necessarily need a press sometimes I'll use a large vise for this. I think it's a good thing that it's a tight fit, and insures an even rotation in the machine. Thanks for bringing this up!

Yes I agree about the 12v radiator fan motors. They seem to be cheaply built. I oil the bearings every once in a while when they squeak a bit.

hard to tell. Possibly a dirty fuel filter or the tank not venting. Definitely sounds like it could be a fuel line issue. Any other ideas on this thread welcome.

Check valve clearance. My 600 did same thing Did valve clearance job,runs like new

@@neal197 Yes BR 600, 700, and 800 4mix. This is a BR 350, no valves.

Glad you were able to get it fixed. Thanks for watching!

I agree. If gas is not available, this may be another option. Or solar charging with battery powered equipment.

It still works great! I did try to run it off a 60 watt solar panel and it didn't have enough power. I also tried to reduce the 200 watt panel voltage down to 12v with a step down converter and it wouldn't get the fans going. So, I think the speed controllers are the ticket.

Yes, it could be faster that way, especially if you use a battery drill. Remove starter, then engine cover.

I'm 5' 8" , not to tall, but I do prefer the smaller grass whip. Thanks for the comment!

Glad to help!

Sickle mower attachment.

I guess you're limited to how far back you can put the strap. Batteries make the back a little heavy.

@@fischertoolandgarden Yes strap connects to trimmer in a non adjustable position.

Thanks for the great reply! We have scythes, sickles, and weed whips for sale in our shop and most of what I hear is that it's to much work. Thanks for chiming in that the engine ones don't save that much labor. you still have to carry them around and swing them back and forth. As far as the biodegradable trimmer lines, I think Oregon makes one. Oddly enough, it is not available in California.

I saw another video of a guy using one and he seemed to get into a rhythm while using it. If anything it will be a good cardio workout out in the fresh air!

I like the exercise, too lazy to work out at a gym. I saw a guy on his 70th birthday cut 3 cords of wood with a crosscut saw. That has motivated me to try to do as much physical labor as I can, for as long as I can. Getting outdoors even using a gas trimmer is good exercise. Fortunately we grew up in a generation that spent lots of time outdoors doing physical activities!

Fuel filter, Air filter, Carburetor adjustment or replacement? If the fuel filter and air filter are OK, I would try to hold the throttle wide open and try adjusting the High needle (H) on the carburetor. If it doesn't work, and the blower has good compression, I would probably replace the carburetor. I would probably check the exhaust port and muffler first for any blockage though.

No, I haven't been paid by anyone for any videos yet. I actually like the Echo hedge trimmers, but just wanted to share some mechanical knowledge to keep them running.

Yes, I have another video on an American scythe and scycle. The blades are made in Austria.

I remember family using a scythe when I was a child back in the 60s I'm in the UK but that manual one would kill me off lol

Your welcome! Thanks for watching.

Yes, after doing this video the FSA 200 came out. I haven't tried it yet. Lots of people think battery equipment isn't powerful enough, but the only issue I've found is battery run time, which can be dealt with.

@@fischertoolandgarden I agree with you in regard to the machines power, in my case I have plenty of power on the FSA135 what I with need is battery time, and I have heard the FSA200 have about 12 minutes lees battery time, so I am not sure if I with trade my FSA135 for the FSA200. You saying battery time can be dealt with, how come? I have the MSA300 and for 8 hours work in the forest I either have to take a generator or a truck loaded with batteries. In a 18" oak log best I can got with MSA300 and the AP500 S batteries was 11 cuts. The machines are great, are a joy I have different Stihl ones, battery technology for commercial use still light years away.

Thanks Sergio. We've been a Stihl dealer for years and have never been let down by their products or warranty.

I have the FSA135 about 3 years, not this model but in bicycle handball configuration, I have used it beyond manufacturing recommendations so far never have a problem. I have use all kind blades the steaming line is the one very much not use, in did very much all I have are fields to clear off heavy brush. I also have used it with all batteries from AP200 to AP500S, sure it works with all this batteries but feels better balanced with AP300S however most times I use the AP500S because I with got few more minutes battery time. Myself I with buy this machine again. Stihl now comes up with FSA200 witch have little more power but by what I have heard is losing in battery time. I also have the GTA26, 161T, MSA220C, MSA300 and the BGA86, never have any problem with machines my observation is the machines are light years ahead of the battery technology for commercial use. If you are going to buy this machine or in did any Stihl machine that use AP batteries make sure you buy the battery charger 500 do not fail for any other one has I have don because ignorance and than later have to buy 2 five hundreds.

@@sirvozelo1 Thank you for sharing your experience with these tools. This is very good information on the longevity and performance of the tools.