Видео

Thank you, I'll give it a try.

I tried Mother's Wax but lost some shine, the 8000g or 10000g sand paper wet was the final polish.

I don't think so 🤔

For the price

Never in Stocks, but easy to find on gun broker

@@WheeledandWellArmed gunbroker is a terrible place to buy anything, there's 1 PKO45 on gunbroker right now and the guy is trying to get $2500 for it

Maybe a gunsmith can fit it for you.

@@WheeledandWellArmed Yeah I suppose I could, but it was my understanding that it was a drop in part, and there was nothing on their website that showed that the parts were incompatible. I also tried to reach out to them for any suggestions, but so far to date I haven't gotten any response. Anyway I just wanted put my experience with the part out there to see if anyone else had a similar problem, and to let people know that there might be an issue should they were considering to do the same. Thanks for listening, cheers!

Great pistol

Some do, and some use what is available for the right price.

Compared to a p365 or a CZ75?

Once you have the Shimono part that locks to your wheelchair you can start making other combinations.

Case knives are popular with 20 to 40 year olds.

I'm not sure what you are talking about. Over a 3 or 4 years the production changed. There are full pre-B and full all the upgrades to basically an CZ85A without the firing pin block. I have move videos in the series. Without seeing the hole, I can't help you.

It has been so long I can't remember. It works great.

Such a hard trigger, not my favorite

He was in Washington state. It was a website. Sorry I can't help any more. But CompTac is still around.

It has been a while but I assume it needs a booster. This one the buttstock is the holster. This is the only exception to the SBR rule, i think. Read up on this model. Interesting history.

IDK I can't compare... in-between?

Most Tanfoglio aftermarket parts fit. I found everything at Patriot Defense: BOLO and I can not remember the rest. CGW parts might work. Eric whatever in France.

I bet!!! Great combo!!!

Yes, it's overembelished logo made me think so. Thanks.

I got tired of YT $17 a month and then I realized they never sent a dime. They hate gun channels.

LOC are the best. I do like aluminum, too. These are cool grips.

@@WheeledandWellArmed I've been reading only Tanfoglio grips fit on the P8S, not any of the CZ grips do, or you would have to modify them. Do the Cool Hand grips have to be modified and do they hang off or have an uneven fit on the P8S?

100% go stainless steel. This is real SS.

These are aluminum cz75 cool grips and fit 100% without buggering around.

Zero issues: It was raw stainless steel

@@WheeledandWellArmed sorry I didn’t specify, I was referring to the slide stop that you couldn’t get.

@@WheeledandWellArmed you did a beautiful job on this piece though. I’m planning on buying one at the end of the month. Maybe I’ll get to polishing it, usually I only polish guns on impulse 😂. “Hmmm I wonder how this black 1911 would look like with a polished slide.” And end up with two tone guns, even though I promise myself I’ll do the frames eventually 😂

I need to rework the trigger, a safe queen until the trigger is below 3.5 lbs

Yes, been down that habit hole and have everything but Star, Sterling and the Chinese one. Look for the Springfield CZ clones and Sphinx 2000.

@@WheeledandWellArmed seen a couple sphinx on mosin crate, very expensive, usually around $1500

@tmsek8155 I have a 2000p I think, it is about the cheapest. Rhodium plated and so nice.

@tmsek8155 I think the UK made Sterling might be as fine a finish but they sell for 2x more.

I'd sell maybe because I do not have any other 40, so I have one partial box of ammo

​@@WheeledandWellArmedI be interested for sure.

Is this a question?

I had 75 knives and half are from BladeHQ. This is the only knife I ever returned. I have a ZD knive and a Hogue that are hard to open, but I never returned them. Maybe a one-off, but I was expecting more.

sarusa.com/contact-us/

I think they are in Album AL but maybe building a factory in Georgia.

All CZ75 mags fit. I have close to 100 CZ75 and clone CZ75 mags. Maybe 80% of CZ75 parts fit but I think 100% of Tanfoglio parts fit.

I don't think it is Pre-B only. I think it is all CZ75 mags and the Pre-B are basically Shadow2 mags and backwards compatible if memory serves me.

Swiss made B&T MKII 9mm Semi-Auto Pistol, and I see it $799 with a $1455 MSRP. Plastic lower. It looks like my Sphinx Alpha. It is said to shoot like it has ball bearings like the P210. I do not own the CZ P7 or P9 but have this in my cart at $1455, but $799 is very tempting for B&T Swiss made clone.

@@WheeledandWellArmed thank you so much for your reply. I appreciate your insights.

@@WheeledandWellArmed a friend of mine had a pre-b 75 and discovered that sp01 mags fit in the smaller pre-b 75 maxwell just as good as pre-b mags. I've noticed that pre-b 75 mags are cost prohibited in comparison to sp01 mags.

Thank you

I never heard any more about this gun, and if it is in full production and how it is selling, but as an investor, he was impressive.

I'm a huge LDA trigger. Para Ordnance was such a leader in innovation. You can pull through the LDA trigger in a beautiful, smooth way. Such a shooter!!!

I tried all my doublestack 45s Sarsilmaz, no Staccato, no IWI JERICHO, no Tanfoglio, no CZ, no ASAI, no Kimber Ultra Ten, yes Bul Armory, yes If you can find the ultra ten or short Bul M5 that would be perfect but anything made by Bul will fit. BTW the Kimber was made by Bul.

I tried the following double stack 45acp i have: STI no Staccato no same CZ no Tanfoglio no IWI Jericho no ASAI no Sarsilmaz no Bul Armory yes but long Kimber Ultra Ten yes perfect Bul M5 10 yes perfect Bul Armory made these Kimber 45 double stack back in the day, rebranded M5.

@@WheeledandWellArmed thanks

Safe place for both seller and buyer and lots of buyers. Let me know how it goes?

I need to send mine to Bul to have a red dot mounted, my gunsmith doesn't have the right screws

Thanks for watching! You should go to blade show. There are 20 or 40 other guys with collections like that but different brands. There is a guy with 40 Rolex watches and a minimum $10k and some $100k

Wow, what a score. Mine are accurate and reliable. What model?

@@WheeledandWellArmed The P12-45 1911 trigger model. I did a field strip. Internals were perfect. Cleaned and oiled. I'll take my new find before long to the range to see how she'll run. if I could send you a pic I would. The pistol is gorgeous. it really was NIB. 🙂

I think the Casbah is rare, so yes, do it.

100% agreed 👍

Oh, I assumed since they were short and fat, they were sisters.

@@WheeledandWellArmed Do you assume that all short and fat refers to women?

You can do it! If you can strip it down, it is fun and easy!

Yes, the blue blade was $2k and his basic is $1200. I hit the small tables the last day. But i did about 40 other lower cost friendly videos. I didn't do any of the $25k plus knives.

That must look sharp. Have fun with it.

@WheeledandWellArmed ty brother it is beautiful, my first 22lr firearm so excited 😊

Yes, a good three days. Your video almost got 500 views. I goal was to give people who never attended BladeShow a bunch of 60-second clips from knife guys like you. Of course, they will not drop hundreds of dollars and no blade nicks or bandaids, and their thumb or fingers will not be raw from flipping, flicking, pressing, or sliding beautiful new knives.