- Видео 87
- Просмотров 271 401
Aaron Morris
Добавлен 16 янв 2014
My adventures with technology, be it old or new. Lots of things to do with old computers, 3D printing, Home Automation, and projects for my Tesla Model 3.
Hasbro 84/Spengler Wand to Spirit Life Size or custom proton pack Electronics Adapter Interface
This is an interface I'm working on to allow you to take a stock Hasbro 1984/Spengler wand and use it to turn on/off the Spirit Life Size pack electronics with the wand without any soldering/modifications to the wand. It also has upgradeble LEDs that work with the wand so you can upgrade the LEDs in your spirit pack or use it with a custom pack.
This project uses a Raspberry Pi Pico, an INA219 current sensor. More details and a link to a product for sale coming soon.
Check out my Etsy store for my related mods and products:
a2threed.etsy.com
This project uses a Raspberry Pi Pico, an INA219 current sensor. More details and a link to a product for sale coming soon.
Check out my Etsy store for my related mods and products:
a2threed.etsy.com
Просмотров: 819
Видео
Spirit Life Size Proton Pack - Hasbro 1984 Wand integration mod!
Просмотров 29419 часов назад
My initial development and testing of an interface to make a 1984/spengler wand work on a Spirit Life Size proton pack. Check out my Etsy store for my related mods and products: a2threed.etsy.com
Spirit Life-Size Pack GPStar Upgraded Electronics DIY - 1984 Mode Demo
Просмотров 1,1 тыс.Месяц назад
This is just a quick demo I recorded for a friend showing the GPstar wand/pack modifications working in a Spirit Life-Sized pack in 1984 mode.
Spirit Life Size Proton Pack - Tubing Upgrade Mod - Part 2
Просмотров 1622 месяца назад
How I upgraded the small tubes on a Spirit Life-Size Proton pack. This is a follow up to my other video about upgrading some of the larger tubing. Check out our Etsy store here: a2threed.etsy.com
Spirit Life Size Proton Pack - Tubing Upgrades mod - Part 1
Просмотров 5192 месяца назад
Here's how I upgraded the tubing on the injectors of the Spirit Life-Size Proton pack from the stock to a 6mm tube. Check out our Etsy store here: a2threed.etsy.com
Spirit Life Size Proton Pack - Motherboard Mount upgrade installation (for ALICE frame) - Part 3
Просмотров 2072 месяца назад
Part 3 of installing A2ThreeD motherboard mounts. This is how to drill the holes in the stock motherboard and install the screws. You can purchase the mounts here: a2threed.etsy.com/listing/1762432959
Spirit Life Size Proton Pack - Motherboard Mount upgrade installation (for ALICE frame) - Part 2
Просмотров 2262 месяца назад
Part 2 of installing upgraded mounts. Purchase here: a2threed.etsy.com/listing/1762432959
Spirit Life Size Proton Pack - Motherboard Mount upgrade installation (for ALICE frame) - Part 1
Просмотров 3942 месяца назад
How to install custom upgraded motherboard mounts from A2ThreeD in your spirit life size proton pack. You can purchase the mounts here: a2threed.etsy.com/listing/1762432959
Hasbro 1984 Wand - Installing Slo Blo cliplite - Part 2
Просмотров 1662 месяца назад
This is how I installed a “clip lite” in bot my Hasbro 1984 wand to make it more screen accurate.
Spirit Life Size Proton Pack - GPStar Electronics Install Walkthrough
Просмотров 8233 месяца назад
My installation of GPStar components into a spirit life sized proton pack. Here’s a list of links for the parts I used for this build: GPStar Frutto Spirit Mounts: github.com/gpstar81/GPStar-proton-pack/tree/main/stl/pack/Spirit Full-Sized GPStar Amp board Mount: github.com/gpstar81/GPStar-proton-pack/blob/main/stl/pack/GPStar Amp Protector.stl My own mounts: github.com/aaronsmorris/SpiritLSPro...
Spirit Life Size Proton Pack Mods - Haslab 1984/Spengler Wand V-Hook
Просмотров 3995 месяцев назад
A new V-hook for the spirit life-size proton pack for holding a HasLab spengler/1984 to your pack.
Spirit Life Size Proton Pack Mods - Adding 1984 Wand
Просмотров 4 тыс.5 месяцев назад
Adding the HasLab 1984 wand to a Spirit Life Size Proton pack. 3/4" Loom: www.amazon.com/gp/product/B078KQB4KF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Check out a newer better way to do this coming soon to my shop: ruclips.net/video/F9Mw_i69oM4/видео.htmlsi=uRZcsKSgS1MY_lRH Check out my etsy store for mods for this pack: www.etsy.com/shop/A2ThreeD Use the code TYSAVE10 for a discount!
Legacy scale Bruticus - Pocket Toys PL0 Ruiner quick review
Просмотров 2016 месяцев назад
Just a quick review of Pocket Toys PL0 Ruiner, a legends scale Bruticus. It's a clone of the Iron Factory War Giant. This review is just of him in combined mode and not the individual bots.
Transformers G1 Season 1 Legends Figure Collection
Просмотров 5198 месяцев назад
This is a little corner of my home office where I'm collecting Season 1 of the G1 Transformers cartoon. These are all NewAge and Magic Square figures. At this point, I'm complete with the Decepticons but still need to source and wait for the rest of the Autobots to be created and sold! Hope you enjoy as much as I enjoy collecting and arranging these guys!
Ultrapro Switch with LD2410 Presence Sensor Part I
Просмотров 1,4 тыс.Год назад
Sorry for the echo/borg-like voice. First time using OBS and I had two mics hot. I'd re-shoot but can't as I don't have another switch to cloudcut at the moment. Cloudcutting an Ultrapro Wifi smart switch for use with ESPhome, and installing a custom faceplate with an LD2410B mmWave radar presence sensor for a stealth motion sensing switch. Links: Ultrapro Switch: www.amazon.com/dp/B0B5FNK9YQ?r...
5.1.4 In-Wall Dolby Atmos Home Theater in a Play Room - Featuring RSL W25E and C34E Speakers
Просмотров 4,6 тыс.Год назад
5.1.4 In-Wall Dolby Atmos Home Theater in a Play Room - Featuring RSL W25E and C34E Speakers
Topping MX3S DAC/Headphone Amp/Amp Overview & Thoughts
Просмотров 2,6 тыс.Год назад
Topping MX3S DAC/Headphone Amp/Amp Overview & Thoughts
2021 Tesla Model 3 SR Amp Rack Build Part 1
Просмотров 500Год назад
2021 Tesla Model 3 SR Amp Rack Build Part 1
Model 3 SR+ Rear Fill Speaker Install
Просмотров 2,9 тыс.Год назад
Model 3 SR Rear Fill Speaker Install
2021 Sienna XSE Subwoofer Amplifier Stealth Install
Просмотров 2,4 тыс.2 года назад
2021 Sienna XSE Subwoofer Amplifier Stealth Install
2021+ Sienna Wiring Harness for Kicker KEY200.4
Просмотров 4562 года назад
2021 Sienna Wiring Harness for Kicker KEY200.4
Installing ADW800Neo Midbass Speakers in Tesla Model 3
Просмотров 3482 года назад
Installing ADW800Neo Midbass Speakers in Tesla Model 3
2021 Sienna XSE - Kicker KEY 200.4 quick demo
Просмотров 7 тыс.3 года назад
2021 Sienna XSE - Kicker KEY 200.4 quick demo
2021 Sienna XSE Amp Install - Part 4
Просмотров 1,3 тыс.3 года назад
2021 Sienna XSE Amp Install - Part 4
2021 Sienna XSE Amp Install - Part 3
Просмотров 1,7 тыс.3 года назад
2021 Sienna XSE Amp Install - Part 3
2021 Sienna XSE Amp Install - Part 2
Просмотров 3,6 тыс.3 года назад
2021 Sienna XSE Amp Install - Part 2
2021 Sienna XSE (non-JBL) Audio Upgrade - Part 1
Просмотров 5 тыс.3 года назад
2021 Sienna XSE (non-JBL) Audio Upgrade - Part 1
Do you do commissions for proton packs?
Any tutorial planned for how to attach the alice frame? Is yours magnetic?
@@maddoglive I didn’t make any video on mounting the Alice frame to the motherboard, but it’s secured with 3 bolts and 3 spacers to the stock motherboard. I attached the motherboard with both the original screws and custom 3D printed motherboard mounts that I sell on my Etsy store. Regarding the wand to pack, I have a 3D printed v-hook I use on the pack that I also sell on my store.
What voltage are you powering the Spengler wand with? I'm working on something similar. I figured the wand wants 4.5v Do you think it would be a problem sending the wand 5.5volts? Cool stuff man! congrats
Really cool build. What cyclotron lights You would recommend for Spirit full size with original cyclotron?
@@mikatikander2449 I think that depends on what your goal is, what electronics kits you select, etc. I’m making a board that will allow you to use a stock Hasbro 1984 wand with the stock spirit electronics, but will also have LED upgrades if you want. Otherwise, with GPStar the option is pretty much the Frutto LEDs or a LED ring.
Hi. I am gonna use Gp star kit with my spirit full size pack. I was wondering that does the frutto leds plug in easy on spirit cyclotron, without any dremeling, or just go with the Led ring?
@@mikatikander2449 It looks like they have 3D printable mounts to hold the Frutto LEDs on the spirit cyclotron. github.com/gpstar81/GPStar-proton-pack/blob/v5.3.4/develop/stl/pack/Spirit%20Full-Sized/Spirit%20Cyclotron%20Lens%20and%20Frutto%20LED%20Mount.stl Otherwise, the LED ring might be a good fit as well.. you can get a 45 LED 130mm ring for about $12.
Can you share that battery stl file?
@@KungFuCartoons Yes, I used these “batteries” with some M3 bolts and nuts. www.thingiverse.com/thing:3160060
🤤 me wants lol, wondering what the cost of that is going to be.
@@danielmccann4545 I’m working on the PCB design now. I’m trying to keep the cost around $40 for the kit depending on options.
Oh man! That is amazing!
That is just amazing. Good work sir.
What tubing did you use
I bought from another vendor on Etsy but they also have them on GBFans.com
Did you make that panel?
Any chance you have the video of how to actually expose and remove the radio? I don't want to start prying dash pieces up and end up breaking something. I need to install an add-an-amp harness to my 2022 Sienna
I may on another one of my videos. I haven't owned the car for a while now, so I haven't been managing the content muuch.
How much would you say all the electronics cost?
@@YTY203 For this setup, it was around $200. GPstar just started offering a “lite” package that includes a pack board and a few other things that can talk to an unmodified 1984 wand for less now.
I found this video through your post on the Sienna forum. Thanks a ton. I actually have a Rav4, but you're giving me some great ideas. I'm going to see if I can fit an amp in the center console like you did. Thanks for filming this!
Really appreciate your videos! My pack just arrived today! Ordered the crank and bump upgrade!
Sweet, I am removing old audio system from my 2023 Tacoma and replacing the old amp with a 200.4 and adding a 500.1. I’m a mild audio file so I’ll be comparing these key amps to amplifiers that require math, test tools, and actual design work to see how much more efficient it is from an engineering perspective. I’m pretty sure it’ll be amazing and is a great option to get high end sound quality without the high end test tools.
I have a few questions if you have the time! Background - I was using a RF 500.1 with LC2iPro trigger on audio signal and using it for remote turn on. It worked great, so I bought an audiocontrol 800.1 and took the LC2i out of the mix. The second I did that it tripped the efuse and I got the dreaded shutting off message. So now im looking into doing a a delayed start with a resister for pre charge. 1) Do you need to take the resistor out of the circuit or was that just something optional? I can't seem to find a valid reason other than it becomes useless once the 200amp relay starts. 2) And this one is pure theory but with some backing but cant we just use the actual power from the penthouse to trigger the system relays? Meaning in my testing the penthouse shuts off when the car turns off... cant we just use that as the trigger source as well? 3) What time delay (in seconds) did you decide to go with? The crazy part for me is RF SHOULD trigger the the message as the audio control but the audiocontrol amp triggers the message even with the remote turn on not even plugged in. So maybe its an amp design thing but I think some amps dont even allow a charge up till the remote source triggers it. Its strange to think about it tbh. I have more testing to do but that seems to be the case given the audiocontrol triggers the efuse even when not asked to turn on yet while the RF does not. Maybe the caps are just that much bigger and I was "getting away" with it but still interesting.
Would it be ok to use a regular toggle switch to power it? I have a 1984 wand coming and I plan to put an a frame on the pack.
These mounts are so good. I did visit your Etsy store but you don’t deliver to the UK. Gutted as these would be perfect for me as I want to attach an Alice frame to my Spirit Pack
@@MFLuder2012 Let me change that.. I originally turned off international orders because Etsy doesn’t calculate combined shipping on multiple items and I had to cancel orders as I ended up paying more in shipping than I was actually making on the item.
@@aaronmorris9352that makes sense. Hopefully one day you will be able to ship internationally and I’d love to get them - - I just realised you updated the shipping on Etsy. I get paid Friday and I’ll be ordering them straight away
Got the '84 wand, proton pack being delivered tomorrow. About to order your motherboard mounts for it. Really looking forward to you wiring the wand in, as that's what I want to do as well, but the kits are pricey like you said. Hope you get it up and running soon!
@@wickedd365 I actually ended up doing a GPstar kit in the wand and DIY gpstar in the pack side. I have some other videos of how I did that as well. I fried the electronics in the 1984 wand messing with things, so GPStar was the only way to “repair” it and upgrade at the same time instead of buying a new wand again.
Mișto Telefonu
sick 🎉 exited to see next video 🤩
Is that the same for the 2024 model? I have the xse with the 12 speakers and subwoofer but it so weak the subwoofer ugh
the white speakers, can you send a link to them?
Oh yeah, they're Kanto YU Passive 4". They have a powered version and passive. They're about $150-$180 online: www.kantoaudio.com/passive-speakers/yup4/
@@aaronmorris9352 Sorry I missed the name in the video, but I finally found it and thanks to you I have it on my desk along with the Toping MX3S and I am very happy :)
If you put some isopropyl alcohol on the hot glue, it will come right off
Man i can figure ou thow to get the audio scroll wheel to work
I bought mine last October been modifying it since 👍🏻👍🏻👍🏻👍🏻
Class system , love the blue lights , very robust and expensive looking compared to today's rubbish
Would it still work on towers today?
This Motorola uses analog network and they are no longer exist in the US.
The cell towers this phones uses (1g or AMPS) has been shut down since 2001 in the US. You can no longer use a dynatac as a main phone
Very nice! Did you have to change the input voltage jumpers in the helix from 16v max to 32v max?
No, since on the SR+ you’re only getting signal from the up front computer which is 10v p-p and there’s no factor sub amp to pull signal from.
This looks great! I just got a ‘21 SR+ and I’d love to install this in my own, would you be willing to share some more details? Do the footwells turn off and on with the car?
Yes and no, they were wired into the 12V power in the center console, so as long as power is on to that circuit, they are on. Typically it does turn on when you open the door and sit down, but it also stays on if sentry mode is on.
Can you provide the 3D print model?
Sure, the STL is here in my GIT repo: github.com/aaronsmorris/3dprinting/tree/main/Tesla%20Model%203
Exactly what I’ve been looking for thank you
Потянет pubg?
Can this be connected to active speakers? I have Harman Kardon soundsticks 4 and Edifier 1280bts.
I bought a 0.7 revision one of these boards in 2017 and still haven't actually put it together. I have basically all the parts but never got it together... I'll be trying to build it some time soon.
Wow, that's a blast from the past. It's kinda sad that the whole community around these builds seem to have stopped.
@@aaronmorris9352 Sorry I think I meant 0.6 ... It's the slightly updated version vs what's in his latest documentation but isn't the Circuit Sword. IMO in 2024 I wouldn't bother building one of these again unfortunately outside of the build experience itself, there isn't much point when you can buy a pre-built Chinese emulator handheld for 40 bucks and it just works instead of having to mess with Linux and the inevitable downsides that comes with building your own device in a casing that was never meant for it. Or just hack a New 3DS and you're either playing natively or emulating everything a GB Zero would ever be able to do. The build was fun though. I'm in the "configuring and attempting to update an 8 year old Linux distro" stage at the moment. I may be bald at the end of this. Good build btw, and I'm not trying to knock anyone who did these builds (hell, I'm one of them) but with the power of 7 years of hindsight I just don't see a practical reason to build one of these in the current day, it would all be subjective reasons and "because it's fun" type justifications I think, which is totally valid, but, that's my theory as to why these aren't really seen much anymore. Oh well. I have mine. It seems to run and assuming I don't brick this upgrade it'll be a nice functional piece of a really specific period of time in homebrew/emulation history.
DYNATAC 8000X 🤣🤣💀💀💀💀
Hi Aaron, I am about to start the upgrade on my LE. I got the Kicker DSP, ordered the GS690 & GS25s. I just want to ask what happens with the middle row speakers and liftgate speakers? Are they still functional/running parallel with the other outputs? Are the GS690 paralleled with the GS25? Thanks
I don't have my Sienna anymore, but from what I recall, the G690 and GS25 should be on seperate channels of that amp, basically you want to run it as a 4 channel amp. You'd just leave the rear/middle speakers attached to the factory headunit connection.
@@aaronmorris9352 Got it, thanks
Hey, nice collection!
Thanks! It's a fun and addictive hobby.
Mine doesn’t have that my subwoofer came disconnected it doesn’t sound at all just the lil voices on the side how can I connect it
This was showing how to install your own amp and subwoofer. If you want to add a subwoofer to the Sienna, you'll have to add an amplifier that gets its signal from the stereo up front and then some form of box with a subwoofer in the rear of the van.
I love he got a Hisense U series TV. They are amazing
It was amazing, until my kid broke it :(
@@aaronmorris9352 excuse to get the new U8
Can't wait for part 2!
Nice 👍🏻 Need to have my hands on Cloudcutter now as I need to reflash Around 5-6 Tuya based devices. Have been using Home Assistant and total devices as of now is 20+ growing slowly with DIY Efforts 🤩
Hi do you have an idea what types of harnesses you need to plug it into the wiring of the tesla without splicing things?
You’re asking at the right time. FInally the aftermarket has caught up and you can buy a pre-made T harness to do just that: catalog.pac-audio.com/catalog/amplifier-integration-harness/lphtsl01
Did you bi amp the front speakers? Looking to install this in my Odyssey but debating if it’s worth bi amping the front mids and tweeters.
Yes, I did bi-amp it.
Hello did you run new wiring or connected to stock
@@ssjdavid I connected mine to stock harness
@@jamesyu4182 I fucking love kicker amps
That's pretty cool, I thought you could only use the LD2410 on esphome running on esp chip.
probably still better way as then you can setup and configure the LD2410, sensitivity, etc. Just using the occupancy pin relies on default settings. I guess one could change those settings in the LD2410 prior to installing on the beken chip.
LD2410B and LD2410C have both bluetooth and serial connections. While an esp is useful, it's not the only way to read the status.
I come across your video on how to flush the Automatic Transmission in my 2012 Mazda5 Touring. I feel that it was very Informative the way you described on how to do it. I followed every step that you mentioned. It does take time but, it was well worth the time. My 2012 Mazda5 had 106,929 on it when I did the flush. I changed the Filter an about a week ago. I found the fluid was real dirty & black. So, as I mentioned I followed your steps to flush the transmission and the transmission is working so much better! Thank you for doing this video it is greatly appreciated. A very Satisfied “VIEWER”!
Quick question, any idea where to get remote on for the Amp? I’m a big fan of your installation process in siennachat😊
where did you tap the rear speakers to?? Do you hAVE the STL files?
The rear speakers are running straight into my Helix V8 DSP, so they're not tapped off of any of the factory things. But you could parallel them off the door speakers using an aftermarket harness. I used Travis Llado's mounts: grabcad.com/library/tesla-model-3-aftermarket-stereo-mounts-1/details?folder_id=6189097
Did you ever sound dampen the font?
I did, it seemed to help a little more. I ended up only using just the dampener CLD and not using the extra cotton or MLV because it make the flooring too thick.
@@aaronmorris9352 Where'd you find instructions on how to access the metal to lay the CLD? Also, wouldn't a layer of MLV be thin enough to lay under the carpet?
very sorry what are the quick connector you used are called i really like them and look very oem too
Those are called Deutsch or DT connectors. You can buy generic versions of them on amazon. I'll post links in my description.