Видео

Thanks for the straight shooting. Your video saved me from trying to Ipilot with a helix5 g2.

How do you use stored spot lock ?

Thanks !

Hi I have a power drive V2 with GPS. Do I have an internal GPS sensor that I need to calibrate by doing the circles? I don't have the GPS hocky puck. When you look at my remote screen my bow and motor are offset when it's in the straight forward position, if that makes sense to you. Thanks

does the 14 pin connecter supply 12 volts to the hummingbird helix

My spot lock is an anchor. My GPS is a marker buoy.

I have a Built in Mega DI Transducer on a Terrova. Anyone know the adapter number to connect the Ethernet cable to the MDI trolling motor transducer cable? It came with the ethernet to 5 pin adapter to connect to the Helix G4N but nothing for the transducer side. Or do I need to get an ethernet switch? Or is there an extension cable for the MDI extension cable to go to the 5 pin?

Great video

This was the best explanation of how to use, especially for someone like me that still has problems using cell phone and computers 😅 I have subscribed! Thank you!!

Does this motor connect to my Helix 7? Or, will I have to buy a new one? Thanks for the video! I just bought this motor and I'm trying to learn how to operate it.

How the hell did a group of adults come up with that I piolet link remote? It’s upside down and the most un ergonomic remote of all time. The only kink in the system.

Did you have issues with the bolts on mounting bracket? I tried installing mine yesterday and the nuts were really tight and even snapped 2 of the studs

So I have a mega di transducer on my terrova does that mean I cannot use that transducer on my mega di + unit ?

Great video John!

thank you so much for this video - I searched and searched and found no concise info on this - although I was looking at connecting to a Garmin. The engine half of it to the Gateway was what we are having trouble finding info about. I have a question - that engine harness data cable - they come with THREE connections from what I see, but you are only using two? And I assume a junction box between the data cable and the Gateway is not needed because you are running only one engine?

When running one boat network, when deploying raptors will ultrex stop running? Same question other sequence, will raptors come up when reactivating trolling motor?

Very enjoyable and informational, thank you for taking the time to put this on You Tube..

everything connects and the Helix says Trolling Motor connected, but none of the control functions have any effect on the motor. Minn Kota Riptide Instinct Quest - Hummingbird Helix 7in G4N

What if the island isn't round........

In the 1st 45 seconds you matter of factly stated info i needed. I was given a helix g3, not g3n. Was hoping to network it but seems all I can do with it is use it independently with its own xducer. The rest of video is great too. Thanks

great video, thanks for the detailed explanation

What Hummingbird fish finder will work with the I Pilot link trolling motors.

Thank you for sharing! 🐟

question what part number is a 12 volt i pilot with foot pedle short shaft thanks

Thanks for the video, it cleared up all my questions, well done

My Powerdrive came with a micro remote, can I upgrade?

Doing this right now! Thank you Sir! Great video!

I have a Lawerance Elite FS, can I control the motor from the FS? I am in the process of mounting, so I haven't gotten that far yet.

Great job thanks

really good video! Just got my first 115 TW and I realyy want the ice to melt here in Sweden now so that I can test it. Awsome looking bait

It doesn't need to be Network Helix. I use a Helix 7 G4 linked into my Terrova. I use it for 2D and routes because the Minn kota Terrova needs map to follow One Boat APP waypoints and other features like routes. The only pain is uploading the information via memory card. It definitely wound be nice to connect wi-fi to update the information directly into Hummingbird, but it's still possible. I import and export information back and forth with my Garmin and minn kota app no problems. I just had to direct connect Hummingbird to follow my routes for trolling. This is my go around so I can use my Garmin and Minn kota.

Great vid and explanations. Cant wit to do this after 3 uea having a helix 9 mega si/di gps and link it with the minn kota ulterra ipilot link

Will The new quest pair with a G2N 10? And a G3N 8 both mega Si/DI..want to run my livescope off them

Thanks for the info

Do both helix units need their own lakemaster chip? These are incredible videos. Thanks for taking the time

Does this allow you to pick a degreed heading? I.e. 240 degrees for big lake trolling

Im looking at buying a Terranova with Ipilot Link with Mega Imaging Transducer installed. I have a Humminbird HELIX 10 CHIRP MEGA SI GPS G4N Fish so it has a better transducer due to the side imaging. My questions is can I connect the Helix transducer instead of using the built in one that doesnt have side imaging?

Is there a iPhoto kit for the maximum

Only $125

Hi, very good video, I have a question ,what is the difference between the two remote control which one is the best and I live in Canada and I had two model to choose of terrova, the first is 135880 model and the second is 1358894 what model you recommande to buy, thank you again

I have used alot of Trolling motors over the last 30years & I am beyond impressed with this new Quest.Ive only had it a short time,so only time will tell...I just replaced my Garmin,NIT bad fir a first run but they have some work to do... Also the one boat network is amazing also..

Add rivers and it would be great!!

Simple and great info , wish someone would do one for garmin 93sv to xi3 motorguide

I just picked up a used boat with various Humminbird Helix screens and an Ulterra with I-Pilot Link, so I'm just starting to figure it all out. But the VERY FIRST THING I noticed was the placement of the buttons on the Link remote. The non-Link remote has buttons on the bottom so you can see the screen above. Plus, any phone in texting mode has the buttons (keyboard) on the bottom, where your thumb naturally is when you hold it. I think buttons on the top was a bad choice.

So I have the ulterra with the built in MDI tranducer hooked to my Helix 7 G4N at the bow. But I want to run a MSI Helix 7 separately at the helm and link the 2 Helix units. Do I need the Ethernet switch to do this?

You can...IF they are bothe networking models, meaning G3N or G4N (must have the "N":) if yes, you just need one ethernet cable and two AS EC QDE adapters

question, I have a Helix 7 on my console can I put another Helix at the front of my boat and run them both of the same transducer ?

I have the 4g on the new hummingbird and have just upgraded my Minnkota with the new ipilot gps head! It has Bluetooth on it as well! How does this work now?

There are a few things that make me want to go away from hummingbird. By far number one js you have to buy their special adapters and dongles to connect. Everything is 60 to 75$ and it's ridiculous. It's a money making sham.

I appeal to your knowledge. I combined humminbird 1198 and helix g4 into a network, I put a dot on 1198 it is displayed on helix, if I put a dot on helix it is not displayed on 1198, how can I fix it?