- Видео 13
- Просмотров 93 021
Unpaid Mechanic
Добавлен 17 июл 2015
Has Griots made a Miracle Correcting Creme?
We are taking the sexy Teal Green 1993 Ford Ranger Single Cab 4 cylinder and making it shine. Can Griots take out years of southern abuse? We will find out. Thanks to my son Jacob for the work and expertise.
Просмотров: 70
Видео
BMW Windshield Replacement Part 2
Просмотров 326 лет назад
The final result of the replaced windshield for the 2001 BMW 525i from Auto Glass Now in Pensacola, Florida.
2001 525i BMW Speed Sensor/Brakes
Просмотров 1,9 тыс.6 лет назад
We broke off the bolt that holds on the speed sensor on the rear wheel. In the process, we take off the brakes and rotor and still cannot extract the bolt. Ended up gluing it on the stub.
Great Deal on Windshield Replacement in Pensacola Part 1
Просмотров 216 лет назад
Jacob got a nasty hit on his 2001 BMW 525i windshield. He did a little research and we were highly surprised at the low price. I had given a couple of names for the same company because the name does not match what is on the outside of the building (50% Off Windshields on the building and Auto Glass Now on the website and paperwork. We will look at the quality of the job tomorrow.
Blown Motor on the Hummer H3 2007 model and other updates.
Просмотров 4,8 тыс.6 лет назад
Long overdue update on the sick 2007 Hummer H3 and Ford Ranger 1993 model.
Update on 2007 Hummer H3 Transmission P0716 P0717
Просмотров 12 тыс.7 лет назад
The one sensor (velocity speed sensor, found on the outside, driver side rear of the transmission see my other video) fixed P0716 code. It was still slipping after it warmed up. The input speed sensor (P0717) is located inside the transmission (see here www.hummer4x4offroad.com/forum/showthread.php?5353-Help-Code-Analysis-P0717-input-turbine-speed-sensor-A-circuit-no-signal). The pan was pulled...
keyfob
Просмотров 26 тыс.8 лет назад
Failed programming attempt of Keyless entry for 2007 Hummer H3. Instructions are given, it just does not work on my model.
Part 2 Hummer 07 H3 P0716 code hard shift between first and second gear fix.
Просмотров 13 тыс.8 лет назад
Show location of sensor.
Part 1 2007 Hummer H3 P0716 code with hard shift from 1st to 2nd fix.
Просмотров 9 тыс.8 лет назад
Five minute fix after hour on internet.
Bad Wheel Bearing on a 2001 Chevy Venture
Просмотров 4,8 тыс.9 лет назад
Diagnosis and replacement of the passenger wheel bearing with ABS brake sensor.
Replacing Key on 2001 Chevy Venture
Просмотров 20 тыс.9 лет назад
Get a spare before you need a locksmith. To have two keys made and programmed was a little over $10. All but the key cutting can be done at the house. The company link for those keys are here stores.ebay.com/remotez4less/ The website for the programming procedure is www.programautokeys.com/ Thanks for watching.
Everything with be dubya will do the job
After
I replaced sensor 3 times and the connector once still having same issues just at different times even used gm snesor from dealer after i rebuilt transmission and reinstalled everything
What's the part called ?? I have a 08 himmet h3 and 3 times alreeady with mechanic (yrana rebelding) I'm tired
Can't you just change the key ignition
Doesn't work on my 07
What is the part code? I am experiencing the exact same!
ACDelco 19302667
I mean, sudden prop plane sound from one wheel pretty much always means “bad wheel bearing” …unless some jokester swapped in a single off-road tire when you weren’t looking. ;) I wouldn’t have bothered diagnosing further since that’s just not what bad CV joints sound like.
Man I’m going through the same thing, shabbot shalom brother 🕊
Just ordered - PLEASE wish me luck! I DON'T feel like paying $1,700.00!!
May God bless your efforts. Thanks for watching. Let me know how it turns out..
@@unpaidmechanic7964 I just got the part and I hope I can get it in. Underneath the Driver's side, correct?
@@texasrockshillcountry6574 can't remember. Would go out and look but H3 is in the body shop from a fender bender. I followed the wires to the plug on the transmission.
By any chance, does Freddy Kruger ever drive your truck??
🤣🍺
Should label this as a FAIL video, waste of time.
Yes
Thanks for all your help.
Did it show you a check engine light or did you just have codes checked?
Yes on the light but not sure if that is always the case. I had multiple codes for that one light. It might have been one of the other four codes that triggered the check engine light. Ended up getting another trans because they found shavings in the fluid.
I'm about to do the same for my H3 new motor leak down test #3 gone. Do you regret doing this or?
The H3 is not great for a daily driver. It has not been greatly reliable and have put thousands of dollars in replacing the motor, transmission and now the tranfer case. This is all around the 150k mileage. Hopefully I can get 150k out of the new parts. I probably won't sell it.
Unpaid Mechanic 124000
The first digit of your 17 digit VIN number must start with the number 1 or 4. If your VIN number starts with a 2 or 3 or a letter these procedures WILL NOT WORK. Guys! Check your VIN first before you try these.
How did you find this out? Didn't even realize that about the vin number.
mine has been paid for for over three yrs. i have had all drivetrain replaced/rebuilt except rear end. about $7k in two yrs. since no car pmnt i'm still ahead.
Currently it is in the shop with a demolished transfer case. We will probably be $1500 to fix that one. Not having a car payment is the way to go especially if you can save that payment for repairs.
@@bryancook4107 i use the finance deals that give 6 months no interest
Isn't there something in the Bible about pride ? Or coveting or something. Lol your really into owning a Hummer... Just gigging ya no disrespect... God Bless your wife
I guess the pride before you fall is so true. Hummer is currently in the shop with a busted transfer case. I will have a new vehicle before it is over with all these repairs. The great thing is the wife is on her third cancer-free scan. Life is pretty good even without our Hummer. Thanks for the comments. Bryan
Everytime when i turn 2007 hummer h3 on and switch gears from park 2 reverse and back to drive..in between i am feeling like someone rear ended me it is a harsh shift and when i takeoff from a red light or complete stop i feel a shifting pulling on me i keep thinking it is slip yoke idk i got motor mounts replaced pressure control solenoid replaced internal wire harness replaced still same ol issue any help hummer brothers and sisters???
These transmissions are too small for the size of the vehicle. My transmission guy has seen the same thing on the old custom vans that weighed so much.
@@bryancook4107 i was told it is because i have oversized tired on my 3.7 5 cylinder h3 i like the way it looks he gave me a quote of 2k to upgrade trans gears from 4pin to 5 pin blah blah corvette servo 1-2 shift etc idk what he is talking about is there a way i could just slap a bigger tranny in it
@@juanrramirez4742 not sure about the mod but wish they had a heavy duty line of replacement parts. We have had trouble all throughout the drive train.
I cleaned the mass air flow sensor and it actually stopped giving that problem as well as stalling. My problem now is the car jerks on occasion between shifts which I’m guessing is the speed sensor.
I have a question I have a 2006 hummer h3 my speedometer doesn't move but the rpm does .. now it'll work from.time to time . Is that what was happening
The speedometer was fine. It was throwing those codes though. It is very possible that maybe your issue is with the speed sensor. I am not hundred percent sure but thought I read that is where the speed is determined is in the transmission. Don't hold me to that. Definitely pull your codes and check your connections to the sensors ( unplug and plug back). Mine is back in the shop with a blown transfer case. The joy of owning unique vehicles I guess.
@@bryancook4107thank you for the reply . is it just one speed sensor?
@@cser2486 there is actually two. One you can easily get to, the other inside the case. I replaced the easy one and still had the codes and the problems of the trans not pulling when it got warm. I replaced the whole trans with a reman and it went away $2700 later. It was deeper problems than just the sensors being bad.
Thanks for your video. I just followed your process and it worked perfect. I cut 2 extra keys for my car cus it only came with 1 Key. And I also bought 2 remote cuz my car when I bought it didn't even give with a remote so I had to keep using the key to lock and unlock the car. Now I got 3 keys and 2 remotes. I bought a little combo package of 2 keys and 2 remotes for 22 dollars. Paid 7.50 to both keys. (3.75 each). And I programmed both the keys and both the remotes myself at home firing RUclips videos. This video for my keys and another one for the remotes. So 25 bucks is right about my cost for 2 spares to my original one key (3 total now) and 2 remotes side I didn't even have 1 before. This is awesome. Locksmiths were writing be 75 to drive to my place to cut and program both keys and to Program my remotes for 125 dollars todal. Plus their disclaimer *if the keys/remotrs don't work we don't guarantee them since you got your own stuff so you would still or the money. LMAO. And the dealer wanted 250 for asking me 2 remotes and 2 keys programmed. So a little time on Amazon and RUclips and I did the entire thing for just under 30 bucks with the 2 Xtra keys, 2 extra remotes, shipping, cutting both keys and all 4 pieces programmed by me at home. This is just fabulous. I love it.
Yes the dealership is making their money. Their pimp hand is strong. Glad it worked for you.
the road trip was great , the rest gave me a headache and hurt my eyes
I have that effect on people. No kidding, my wife is on migraine meds.
Just as a heads up for you folks. I did the same thing recently and got the transponder key blank but the new Home Depot computerized key cutter would not allow me to cut a transponder key. I went to Lowes and Walmart and they all told me there machines would cut them but they were told not do do transponder keys. I feel certain that the guys could have done it without interference from management. I found a place in Lancaster NH, an Aubuchon Hardware with an older standard key cutter that cut if for free since I already had the blank. It is an awesome store in case anyone is interested. Find a store without the computerized key cutting machine or a guy that works there that is human.
As a follow up I was able to program that key just like the video says. One cycle with the good key and one with the new, and it works. Thanks for you brave help against GM and their attempts to destroy us.
I have a 07 h3 I just replaced the transmission waiting any day for the motor to go out in it. It has 290 thousand. It's been good truck to me I won't get rid of it
I am glad I went ahead and got it replaced instead of getting rid of the whole thing. They are just fun to drive. I am saving to get some paint now. If you ever need a used motor there is a place in Florida that did a great job getting me a used motor. Be sure and send the VIN. I got the wrong wiring config and had to return it. $500 worth of shipping later I was in business.
Mine just went out @ 116K. 😅
The road diagnosis was brilliant. I like seeing your family all helping. Great job
Appreciate it. I got some good kids. Like showing them how to fix their own cars.
hey man my hummer 2007 H3 dont want to run more than 5 miles, two years ago I sent to replaced but now the transmission dont want to run anymore, if i turn off the transmission running again but slow
You need to pull the codes if you got any. How old was the transmission you put in it? I had a reman from GM with a warranty. It wasn't much more expensive than a used transmission.
Idk how mug I was messing with mine and I did what u were saying and then I didn’t hear a horn, so I held down the lock and unlock button on my remote and waited a min and it opened the doors now I’m programmed
Jordan Terry I wish I had tried that before spending the $65. Next one I do I will try your method. Thanks for watching.
Jordan Terry Can you tell me the exact steps that worked for you?
Say all the steps please.
I just hopped in my car didn’t put the keys in or anything and held unlock and lock down on the remote and it came up on my dash
I'll trying to do it ....thx for advice
Will this work on a 2002 Chevy Venture
RJ Claybrook II not sure. Shouldn't hurt to give it a try. You would have an extra door key if it didn't work.
The first digit of your 17 digit VIN number must start with the number 1 or 4. If your VIN number starts with a 2 or 3 or a letter these procedures WILL NOT WORK. Check your VIN first.
U look like the kid on E.T. All grown up.
You Dirty Rat you should see my childhood pictures. I was a dead ringer.
Thanks man that helps alot
Love mine! Hope it works out!
Sometimes you gotta do what you gotta do. I had to take a loan out to buy another vehicle. Why? as a backup. Good call going with a reman Trans. I bought an ex fire chief Tahoe with a reman transmission. God Bless you and your wife.
repeatman thanks for the encouraging words. I hope to have some videos on the new motor.
Thank you !
You are very welcome!
It also doesn't work for my H3 2006 model
Yeah, I had to spend the money on the man with the GM computer. It took him no time though. I have been needing to update. I have had to replace the transmission and just ordered a used motor because the engine can't keep oil pressure. I just broke 160,000 miles. It has been an expensive year for the Hummer.
Yep. Worked for me. I got only one key. Got 2 on THE internet. And Did this. Perfect. Trans sport 2000
Awesome. Glad it worked for you.
@@unpaidmechanic7964 Where on the net Please
@@reginaldgibby7432 too cheap for a website. I probably need to do some more videos though. My projects are piling up.
Man thanks for this video! Got me up and running!
Preston Cole awesome. Mine is in the shop again because of low oil pressure. Glad we could be of help. Bryan
did it solve your shift issues?
This is the outside sensor. The inside sensor was suspect after replacing the outside sensor with the same issues. Once the pan came off (which you have to do to replace the inside sensor), they found metal shavings and magnets on the bottom of the pan. $2900 (I think) later, I have a reman from GM and shifting great now. The inside sensor comes with the reman, so I don't know if that would have fixed it had I just changed the sensor and just let the transmission eat itself up with the metal shavings.
I was able to get mine to reprogram bit the horn did not blow. FYI
Excellent. Was it the 2007 model?
Was it a 2007 ?
Thank you so much sir-- Glad no new trans-
It didn't last. The first code was solved but the P0717 never did clear out. They pulled the pan and found metal shavings. $2600 later, I have a GM reman installed. Runs great now.
Unpaid Mechanic oh man - time ta trade er in !!! - I have 75000mi- put in amsoil synthetic trans fluid at 50000- Go figure- Need a diesel truck anyways '- Toy hauler weighs 4000 empty -
It has 150,000 miles on it. I love driving it. it was worth it to me to invest the money. Diesel is the way to go if you hauling anything. I only haul my teenagers and wife around.
Unpaid Mechanic My brother has the Colorado same engine and trans- 300000 on it but trans did go out and replaced - Sure love my h3 and there is a place in Wichita that will put 6.0 Ls engine in and 4l65 heavy duty trans - fer ouch # 18 k -
+crspcritter I saw a video where they fitted a Camaro engine in one. Definitely not cheap.
what were the symptoms of a bad speed sensor in your hummer..
mr roboto hard shift into second and sometimes having to shift into low 2 to get it to engage. They dropped the pan and found metal shavings so it is more than just the sensor.
what are the symptoms in your hummer that indicated a bad speed sensor...?
It will have a hard time going from first to second.
YES!
He was not yelling.
Stop yaallin ! Poor guy is pussy whipped. I hope she is worth it.
youre a life saver!!!! thank you :) so simple. awesome! :)
Alter Ego glad it could help.