Видео

@xcit what amp fuse is connected to the display/USB port? I am assuming it is separate from the charging port on the passenger dashboard. I know that one is 10amp because I've blown it. lol

Had Sears out today for this, they charged $129 to even tell me it was broken, then wanted $100 for the replacement part and $320 to install it. Please save yourself some money and do it and just follow this video.

Well done. Thank you

Thanks for the super informative video.. just successfully completed this project and probably saved a decent amount of cash! Thanks again!

what a downgrade what a bozo

I think you forgot to move a piece of foam from old part to new one to seal big gap around blue tubes in the hole.

You can remove the center horn/air bag and then can remove the side pieces to get it tucked easier

Hi How do you get it speed and rpm’s to work don’t know where to plug the to white yellow connector on the black wire

Where does that side marker white wire plug in to?

🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽

Amazing. Thank you for taking the time to share your experience. Saved me an appliance repair bill. ❤

Do you know if all of these LGs are the same part number? Looks the same as ours, but not sure...

Thank you for this, Sir. Very helpful.

Worked just as demonstrated. Thank you!

Very informative, thank you. You know that LG is an abbreviation for "Lowest Grade", right? I have a house full of their highly problematic appliances and quite literally each one I own has at least one major design, engineering and/or fabrication/QA problem. LG appliances appear to be designed to copy best-selling features found on other manufacturer’s appliances, and engineered to be the cheapest version possible. The following focus on the problems and disappointments we have had with LG appliances: REFRIGERATOR: Beyond the obvious filter problems, look at the drawer openings that have been restricted by the cheap, poor design of the appliance which relies on cantilevers and stops instead of full opening drawer glides. There is a bar in the drawer that pushes items off the drawer so that they end up falling into the gap under the drawer. My door ice maker always threw crushed ice everywhere when someone tried to put ice in their glass, and frequently froze into a solid block. I eventually quit fighting it and disabled the door ice maker. The other ice maker in the bottom freezer makes ice too fast and it freezes up easily as well. The door water filler is too far away from the filler lever so people who try to fill their glass and our floor gets sprayed by water. TELEVISION: The LG Sound bar I bought was not compatible with the remote control for the LG television that advertised itself as sound bar ready. The remote control has a button for a sound bar, it just would not work with their own product. In addition, shortly after my warranty expired the TV quit working. I went online and found out that I had to literally bake the motherboard in my LG TV to keep it working (true! do a search). That worked for about 18 months before replacing with another brand. FAN/MICROWAVE: (Over Range) First one I received from Amazon was defective when new. Too bad the installation kit and etc. had to be installed before powering up, so I couldn’t return all the parts until I received a replacement and thereby had the right parts to return. The replacement quit working 2 months after the warranty expired. The fan still works so we have been living with it for a while. We plan on replacing this noisy, low powered, poorly designed fan with a traditional range hood and cabinet modifications in the space above plus a separate microwave. RANGE: After we used this “gem” for a few weeks and with poor cooking results we researched to discover that this range doesn’t have a bottom element! We have never seen a thing before, but this is true. Nothing cooks right - even with their recommended pizza stone procedure and at as high as 500 degrees the bottom of the pizza is still soggy. Worst of all, the knobs on my range were apparently designed to unexpectedly turn on the stovetop elements by anyone leaning on or otherwise brushing against the range. We had a guest ignite a plastic bowl by accident. SUMMARY: A smart shopper will learn from my mistakes.

Thanks!!!! This was a game changer for me. Like you said there is nothing on this repair. Before I found your video I was looking at a costly repair that turned out to be inexpensive and a relativley easy do it yourself job.

Thanks for the reply! Now I have to figure out what the heck is going on! With water line off, no leak, thus condenser/ice build up/drip pan gummed up not the source. I'm guessing one of the two ice cube makers. Thanks again!

Thanks xcit, extremely helpful! I had a quick question- before I saw this video, I had a really tough time getting a new filter to fit. I finally got it to fit, but I may have somehow caused a small drip that leaks down to under the freezer. In your experience, is it possible to create a drip due to a crack in the water filter head assembly that would leak down to the bottom of the freezer?

hey buddy, just successfully changed out the tubing, everything went accordingly, thx again for posting this!!!

I know its 3 years ago. But did you take off the existing leather or just put this over it? 3 years later, how is the wear?

Thx, good video, just ordered the replacement and air filters using your link above, hope it's your amazon affiliate link.

OMG!! Thx, same thing happened to me yesterday, I called LG to make sure I had the right part no. and the CSR wanted me to schedule a repairman to come out to my house and put it in. Told her thx, but I've watched a couple YT and it seemed pretty straight forward. She wasn't too happy. Great video, I will use your link above, hope it gives you a few $. Don't worry about the quality of the video, I was impressed you handled 90% of the job with one hand, new subscriber now, anyone that can do that with one hand and in 20 min, is someone I will listen too!

Great job in getting it installed. How much work time (excluding patience breaks) did it take you?

Great video, thanks! However, my filter head assembly has a tab at the back to keep it from tilting down more than about 45 degrees. When I made it tilt more, it snapped off the tab and the back of the filter head connector. So, at least for my assembly, it's best to only tilt the filter 45 degrees until it stops when changing out filters.

What are the two other wires? Black and middle wire?

Dude thank you. I was quotes over 300 bucks to fix this.

You a need in the world of RUclips, and you filled it! Thanks for the video!

THANK YOU SOOOOOO MUCH! You saved me and so many others (from the comments below) SO much time, money and frustration!

excellent instructions. thank you for posting. I was able to fix this myself without any assistance or problems!

So we learned about a door & top edge that dont fit for shit. No problem you hust fix it yer self. Nothing else was learned about Polaris but some garbage he's spreading about shifting notchy, LMFAO. Adjust the shift end on the tranny & bingo. Nobody cares about yer camper, yer out a good machine, sad!

Thank you so much for this video! I was looking for a video to help me with my specific problem of not being able to REMOVE my water filter which was very stuck. Your advice to open the filter door and cartridge at a full 90 degrees wasn't on even the LG help site. Thank you! Will enjoy filtered water again :)

Very helpful. Thank you for posting this. I personally found the water filter housing core is very easy to damage, especially with non LG brand filters. In my case, my first filter replacement attached fine, it was when I replaced the third filter that I realized the housing was damaged and just happened to not leak with the second filter. When I attached the third filter, it leaked badly and I couldn't put the old filter back or use a new LG filter either. The damage can be very subtle as in my case. There is an inner gripper that locks into the filter head when you press a new filter into the housing. The inner core won't fit the new filter heads then you can't twist the filter to lock. In some cases the inside core is twisted and if it turns, it can be turned back to a 9 o clock 3 o clock orientation then attempt to reconnect a filter but if it just doesn't work, order the replacement housing on Amazon or any LG parts outlet and follow the instructions as found in this video. I am not a repair person but it was fairly easy to follow. Appliance repair is an experience all in itself. You call and someone schedules to come out. You pay them. The first trip is to basically confirm what is wrong then have to order a part. Lastly, they schedule a second trip and in most cases an average refrigerator repair I read online is $450. I purchased the housing for $40, a new LG filter for $46 and spent 30 minutes of my time. It was about as straight forward as an appliance repair can be. Thanks again, watching what you did helped me be brave enough to attempt it myself. I value repair staff quite a lot but some things are design issues waiting to break like soft plastic housings. This should be much more durable . I can't complain too much the replacement part was only 40 dollars. That is cheaper than an LED light replacement in some refrigerators. I was pleasantly surprised the part was so affordable. It's actually less expensive than the filter which is odd now I think of it : )

Thank you so much for making this. I had the temp going to 144. Watched your video and saw the wire and realized the dealer put it in the wrong place for the sensor. 1/2 inch from the radiator.

Thank you so much for this step-by-step video. This proud 70 year old grandma did this all by myself! It took me longer to unload some of the contents so it would be easier to move the frig out! Again, you did a great job and I so appreciate you taking your time to make this video! Now hoping the frig will cool as normal since it’s been without the water/ice maker for a week. Maybe that affects the defrost which affects the inside temp? 🤞🏻🙏🏻 Nancy

Thank you so much! I broke my filter head too and I would have been lost without your help! Everything happened just as you described it. I'm very grateful.

Exactly what I needed, great video!

I'm going to dad's house tomorrow to do this very thing. I'm really glad you posted this video! You did a great job explaining what needed to be done! Many thanks!

Great video. Thanks for the tip 🤙

Thanks for the video! This was great and saved me a lot of money and time waiting for a repair person.

I had an issue with my LG where the inner connector for the filter head came out of alignment and I could not install a new filter. The inner connector has two small tabs that must be at the 9 and 3 o'clock position. Mine somehow were in the 12 and 6 position. It was an easy fix using an old filter, filing off the tabs on the filter, and then using it as a wrench to reset the tabs on the connector. I considered buying a new assembly and replacing as you show here. I will be saving this video for future reference for when I will have to replace the unit. Thank you for a great demonstration. BTW, I looked around and this is about a $400 fix including parts if you call a repairman to do it.

Poooooo larrrrrrrr issssss

Poooooo larrrrrrrr issssss

Proclaim it from the tallest tower….MY WIFE HAS ICE AND COLD WATER AGAIN!!

YOU ARE A LEGEND

I need to wire in a mirror mounted turn signal, would this process work to add that signal to the normal blinker light?

Impressive how much you got done with one hand. Thanks for posting... very helpful!

When you mention the instructions for the red and orange wires were not correct, what was the issue? Did it not turn on?

This is great. Thank you for sharing!

Very nicely done and impressive video quality....in one take! I changed mine out in about 45 mins. thanks !!

Great detailed video. Will the interactive display control your sound bar as in volume and song selection? How does it compare to ride command? Any differences ?