![FrameRite Airdrie](/img/default-banner.jpg)
- Видео 18
- Просмотров 331 386
FrameRite Airdrie
Канада
Добавлен 16 апр 2017
Framing, carpentry and construction in and around Airdrie Alberta.
Framing Large Office Building (No sound).
Framing a large office building 92ft X 40ft - 28m X 12.2m. Total wall height over 2 stories 27ft - 8.2m. Tall-walls are all engineered LVL studs. A breezeway bridges over the drive-thru and connects the office to the large post-frame warehouse (built by others).
Просмотров: 222
Видео
Cantilevered Sliding Gates in Horse Arena.
Просмотров 2582 года назад
Just a quick video showing two cantilevered sliding gates, built out of plywood. Track system also plywood. Gates weigh about 40 pound each and travel on castor wheels, stabilised by appliance rollers designed for fridges. Gates custom designed and built by me. Later, a detailed construction video of them will be ready.
Removing Bird Nests from Vents
Просмотров 20 тыс.4 года назад
Three vents on side of house had birds nests in them. Nests had built up over several years, making vents unworkable. Fortunately, dryer vent was already sealed. Remaining two vents got cleaned then a "cage" fitted over top.
Mezzanine Build Time Lapse. PART TWO
Просмотров 175 тыс.4 года назад
Building a mezzanine in a shop. Final half of mezzanine build with office, washroom and utility room. Walls get lined with 3/4 plywood, stairs installed and built in, doors and attic access installed. PART ONE: ruclips.net/video/TPA_v8c1kzo/видео.html
Moving Garage By Crane
Просмотров 4 тыс.4 года назад
Garage had trouble with rain seeping under walls. Some wood was rotting and needed repair. Garage was craned off onto lawn then new concrete pad was made, built up higher with bucks around edge to keep walls above ground level. Video show garage craned back into place and reattached. No professional filming, just a cellphone where possible.
Mezzanine Build Time Lapse. PART ONE
Просмотров 26 тыс.4 года назад
Mezzanine with office and other rooms been framed inside a large utility building. Ground level, second floor, upper walls and windows. PART TWO: ruclips.net/video/Pz7h2EKT4aU/видео.html
Dorex Commercial Door Lock Operating Instructions
Просмотров 9 тыс.4 года назад
A quick demonstration of the TWO options for locking a Dorex commercial door lock. Can be single locking with each entry, or PERMANENT locking for all entries.
Homemade Dust Separator
Просмотров 2704 года назад
Made a homemade dust separator out of a bucket, a recycling box, some scraps of plywood and a few plumbing parts. Used the Thien Baffle system.
FIRE RISK!! Cardboard Basement.
Просмотров 22 тыс.5 лет назад
Shocked to see this basement room has been completely lined with CARDBOARD. Even around all the electrical! All was replaced with drywall. *Apologies for sound quality! Filmed on Cellphone.*
Making 21st Birthday Key with Oak
Просмотров 3,6 тыс.5 лет назад
Making a 21'st birthday key. Used oak. Didn't like the ones for sale, they looked too cheap and tacky, but cost a lot. So I made a superior one and inlaid a real "silver fern" leaf, which unfortunately turned green when I covered it on polyurethane. Also made a cardboard template with screw locations marked, to make wall hanging much easier. No sound, so I'll use a standard RUclips track to fil...
How a PRO celebrates end of a semi-flat roof
Просмотров 1165 лет назад
Large roof with very shallow slope. Finally finished after 63 beams, almost 100 trusses and 4 lifts of plywood .
Tile removal sample video
Просмотров 5646 лет назад
Just a sample clip of removing tiles with a Bosch Rotary Hammer with a Floor Scraper attachment. Small tiles on concrete. Even the thinset/mortar cleaned off very well. If using on wood floor, watch that the scrapper doesn't dig too much into the wood.
Creating Ellipse in Framing. Part 1
Просмотров 2896 лет назад
Video explains how I made a huge ellipse in a framing project, for a recessed ceiling. Original video of project had poor sound quality due to location, so I made this to explain what I did. originally uploaded on my old channel "Gumboot Zone" as "Giant Ellipse Construction For Ceiling" (Part 1 & 2). RUclips doesn't allow you to transfer videos to new accounts, so I had to re-upload here with a...
Mice In Floor! Part 2: How to get them out!
Просмотров 14 тыс.6 лет назад
Part 2 of Mice In Floor. This video show how I got them out, by using basic knowledge of how a house and floor is constructed. Caught 6 in total by time of upload! Be sure to watch Part 1 where I demonstrate & show how a house floor is built, providing access to mice.
Mice In Floor! Part 1: How they get in.
Просмотров 5 тыс.6 лет назад
If you have... mice in floor, this video demonstrates how the construction of floors (and houses) allows mice to get in and crawl through entire floor system. Understanding that goes a long way on knowing how to get them out and KEEP them out! Part 2 shows how I got rid of them.
Replacing Pocket Door with Swing Door.
Просмотров 51 тыс.6 лет назад
Replacing Pocket Door with Swing Door.
Bummer - I was hoping to see a video where a crane had to lift a garage from the street down the driveway, with a fence on one side, to get to back of the house
Hey, do you have any contact details. I’m looking at possibly turning a 20x20 garage located in a back yard with possibly enough space to get a crane in beside it. Just wondering about costs and any contractors that were used for this.
I have the same issues
you just buy the fireproof spray they sell it anywhere from 40$ - 50$ per gallon and spray it on the cardboard 1 gallon does about 50 - 60 square feet.
Nice work! What are the dimensions of this room? I want to do something similar in my pole barn. Current design has the office at 12' deep but the steps will end up being to steep even with a 3' landing at the top. Might need to make it 14' deep.
Excellent video. Helped me know how they can get in. I am in construction, but just bought a home that has all of the penetrations you pointed out. My cats hear sounds in the basement ceiling before I do. We have killed and see no mice, but have tons of chipmunks and squirrels. Even thought we heard a cat meow once. Thank you for this. Very helpful and thorough.
It’s hard to set cardboard on fire, you should try it. And Sheetrock is coated with paper. Just saying.
No information on how they actually got in dude you spent 12 minutes showing what the bones of a house look like. I came to this video because it detailed where and how to identify exclusion work needed to done.
If you are putting in pocket doors. Dont skimp out on the hardware. Get good quality hardware. I recommend Cavity Sliders pocket door hardware. They are smooth as butter and beefy as hell. Dont go cheap, or youll regret it.
Ahhhhhhhh😮 🏃♂️
,,wow bro
So why did you flash INTERIOR windows?
It is actually illegal to remove or relocate an active bird's nest in many states, even in your own backyard!"
A free man does not ask for permission to remove birds from his property
@@assembly2593 Agreed!
Tough toenails….
any chance you are willing to share some design plans etc or parts etc on this build? this is a fantastic build and would love to do something similar at my barn
Me myself I would have left the upstairs wide open to make like a game room and the downstairs. I would have left open for just all my rollaway tboboxes. That's how I would have done it. Please comment back.
mine have double tracks....
Contrac poison takes only 1 bite takes it to the babes too and if your cat or dog eat it there is no secondary poisoning
I had the same crazy idea and I am glad I watched this video... it stopped my cheap dream idea! Thanks!
The cat is so cute! And man all them little dead rascals look the same hanging off the trap. Just caught one today that looked just like this.
great work
lost the key and cant open it from the outside any help here?
All I can think of is leave it unlocked or get in a locksmith to make a new key.
Safe money... dry wall cost money. .. true Answer
You did a great job! It looks very professional.
How did you attach the slings to lift it ?
Wow. That's crazy!
uh oh... tyfs
Dude's so pissed with pocket doors, he decided to get rid of it once and for all. Pocket doors looks cool and all but it's a PITA to fix. If you have to take trims off or make a hole in wall to fix moving parts of a door, which by the way, will need replacing at some point of time, is not a good design at all.
he really just knocked the small egg 😭😭
It's good to know to get these doors replaced before getting new floor or wall tiles placed thank you
Wow, amazing job!
Your video made me money today man! I did a great job today door opens perfect. Pocket door gone. Trim looks great. Paint looks perfect. I got $100 tip today man it’s all because of you video thanks man!
I've heard squeaking coming from the vents! I'm so glad I found this video, would have never thought of doing this. I even got a cat recently but he doesn't seem to be helping much 😅 maybe I spoil him too much he knows he doesn't need to hunt for food
Love the gate at top of stairs. Great idea.
Very nice! Thank you for videoing!
You can treat cardboard with a boron solution that will make it inflammable. It also stops pests from eating the cardboard.
How would it be done?
Can you lock the door from the outside with a key? I have one of these and unable to lock the door from the outside
Not that I know of. Whether using the single lock position or the permanent lock position, locking it is only done with the inside button. Key will only open or unlock, but not lock on its own.
Just the wood key nothing else on it
Hi are you in nz I'm looking for someone to make my daughter 21st key, we have our own designs but looking for someone to make it
I'm a New Zealander, but I live in Canada.
I'm a NZ carver but I live in manawatu
You might notice a hideous sound from the table saw when I turn it off. While at this job, it eventually stated spitting out flames and clouds of smoke and the motor totally packed a sad. I had to buy a new saw.
What does the garage weigh? I am planning to move my 2 car garage and a crane would be perfect due to site restrictions.
I didn't read any comments so if this is a repeat sorry-... Next time put the cat in the other room bc s/he wants those mice way more than you do! My friends cat kept sashaying around while she was setting traps and as soon as she bent down to put ther trap on the floor the cat bolt right to the trap. Thank God he only got his whiskers stuck in the trap- that could've ended SOOOOO much worse. Also, set the trap as close to where your going to put it. I too get nervous while setting them- so much so I shake. My shaking kept setting them off before I realized setting them close to the spot I want them would work better. Then I would use a pencil to push the bottom edge of the trap further in. Thanks so much for this vid, great tips on how to catch and retrieve the traps that catch the nasty vermin I can hear tap dancing in the ceiling above me!!
best video ever actually
great video
Literally went through 8 videos just to find this, this is what my brain shows me but I can't draw and couldn't find any videos. So thank you for this.
Sorry about the adverts, my video's are NOT "monetised". RUclips now shoves the ads onto any video they want, regardless if the owner has agreed to it.
Thank you! This was amazing and so was the humour!
Very helpful. Thank you. But how did you secure the new stud? Screwed on an angle?
Good question.
What is the height of your building?
The total height is 16 feet. The floor system is just over 10 inches thick and was placed so the upstairs has a little bit more room than the downstairs.
Great video! I have two pocket door I have to change into swing doors to be able to lock them and this video was an amazing example. Thank you!