Видео

I think the "Super-Vee" tremolo is so much better. You can dive bomb and pull back. Plus you don't have to disassemble anything, just remove the old trem, and screw the Super-Vee in all the way as if you're making your trem a hard tail (you won't). Replace springs, strings and dive bomb or pull back to your heart's content. Locking tuners are recommended.

Installed it on my V without issues (other than the pickguard mod). I see others making videos making drastic mods to guitars saying that the FRX is flawed. Well, I just installed on a Gibson Flying V without making any mods to the body and it works flawlessly. Thank you for such a great product.🎸

Oh wow, your Floyd Rose in person. Great!

The centering of the tremolo should be relative to the neck and not the pick guard cutout. The assumption in the video is the pick guard is centered relative to the neck, which may or may not be true.

It's now 2024 and still no left handed version.

The height of a Floyd Rose has always been easily adjusted with the two posts. If I install this thing, how do I adjust the height???

Surely having a locking nut behind the nut would cause tuning stability problems? Isn't this part of the reason Kahlers never stayed in tune? 🤔😬 People tend to use the Floyd nut with a Kahler these days to improve tuning stability, but aren't you going backwards with the locking unit behind the nut? The nut on the guitar would have to be extremely well cut, probably with the slots widened and properly lubricated. A lot of extra hassle to have a trem on a Gibson!!! A good idea in theory, but why the big metal piece at the back, it looks so ugly!! 😬 What was wrong with the original "bolt on" floyd for hard tail guitars, it looked so much neater? Why don't you make those again (or at least the base plates)?🤔

One of best ever created I know is basic best but this new one is beast 😁

So if I have epiphone with T-O-M but strings through body, then I basically can't put this bridge onto it. -_-

Is this a improvement in action over the tom style bridge I much prefer the action of a floyed rose over a tom will this make a tom style guitar feel like a floyed rose style guitar

So how do you sort out the tension bar if you like low action

Just ordered one for my strat this weekend. 💪

why would you skip what seems like several steps, including , setting the action on a " tutorial" video! that was week! taking upo too much of your precious time? unbelievable!! you skipped the most important parts. maybe you should have had a buddy or a friend of yours do this tut......

🤣🤣🤣🤣🤣

Left Handed version? 🙄

I still don't understand why the industry just goes along with this as a "tremolo" bridge. Its cool that the FRX may be the best OFR now. Is there still no way to lock it as fixed?

I just received my 2017 PRS custom 2410 in fire redburst/ great condition. But I don't know if it's for me. How do u like the Floyd rose guitar? Also Ben, was wondering if u play in standard tuning mostly or drop D? You've been more inspiring than anyone to me to really learn more and progress. I was on hiatus for awhile, broke my back in a car accident. Now I'm getting back to playing

Floyd dropping the wrench to a Floyd Rose trem on the ground is a mood

Es como un Vega trem??

N what up with the string input thaz got to be a better way..rs..

Hey. Mr Floyd can you make me another spring plate to go under all me guitars because da ones in de are crap n garbage grade n my book n cause me all kinda probs with em holding tune ,thankz..rs..

It looks like precision work and NOT for an unfamiliar user of Floyd Rose type tremolos...

$$$

I figured two screws would be easy. I measured many times, found the drill bit closest to the diameter of the screws without going over, did the 2.5mm pilot screw per the booklet, went more like 5mm because the screws were stubborn, turned slowly and carefully, and then... stripped one screw and broke the head off the other right as it got tight. So my Les Paul's headstock is a mess. I'm not even sure what to do. I've used screws in maybe hundreds or thousands of jobs, but can't remember something like this happening. I'm at a loss of what to do.

BRO THATS LITERALLY JUST LIKE A KHALER 🔥

I wish Floyd would make trems that are hybrid so they can become a fixed bridge?

Can’t it be mounted on a strat that hasn’t been routed?

** Something I found out the hard way ** The locking nut it comes with is meant for a Gibson style headstock...Not sure if that includes the Firebird/Explorer...but the nut it came with does not fit on my LTD Pheonix headstock. It's just too large, and ends up touching two of the tuning heads. I'll probably need to buy an FR nut and install that instead of the one the FRX comes with...but not something I expected.

無加工ではないですね？ナット取り付けネジ穴開けてませんか？

10 years later…. Is there one of these for 7 strings?

sorry but how do i install the stings

Have built with Vega Trem and Babicz … love to mod my long board stats and teles to take this vs a full route…

I have a ton of complaints on this thing. The first of many is the fact that the only videos out there on the installation of this bridge is on flat body guitars. No arched body guitars like Les Paul styled. The installation and set up instructions are vague AT BEST!! Specific complaints: 1. Height of "intonation posts" being 5/8" of an inch in this video. That works on flat top guitars. Not arched. 2. String height/action screws: do these have to be set so base plate is level? 3. How about a video on installation completely from scratch and not preset/ after the fact. Like, string height abs all the other setup bullshit only comes after truss rod adjustment. 4. Intonation issues: strings cannot be intonated because of all of previous mentioned problems. Strings 1, 2 and 3 saddles can't be moved forward anymore because they're already on the forward screw position. 5. The tension adjustment screw is not centered in the back hole which needs to be supposedly. All talk about this and nothing is discussed about how to make sure it is. Great ideas behind the unit but Floyd Rose R&D needed about 5 more years of testing. The marketing department is a joke at best. The support department doesn't fucking exist because not only have I attempted contact but so many others have tried and failed also.

Has anyone tried this on an Epihone Explorer? I am dying to add this mod to my Epiphone Extura Prophecy, which is kind of similar

I'm not sure how to find nut information, however, in this video, there is absolutely nothing on this subject! Specifically, neck angle from the existing nut, how to correct the string angle from the FRX nut slots when the string isn't touching the slot on the tuner side (shimming the nut, etc) . I realize most of the people installing this are probably doing so on a Gibson but I'm sure that there are a few including myself trying to do this on an Epiphone LP Custom. This information would be very helpful! Thank you!

Just genious. 20 minutes of tuning the guitar and NO ONE word about tuning the measure. I wasted about an hour trying to find dat damn screw.

Like I predicted from its presentation: this will never sell well as it is less adjustable than Leo Fender style bridges.

So what holds the saddles onto the mounting base?

Que floyd rose puedo instalar en mi peavey wolfgang?

Man I would LOOOOOOOOVE to find one of the FR V's! killer guitar

Anyone know if this would fit on an Epiphone SG?

Wish it had 24 frets

Only down?

I’m obviously late to the game but man I sure dig the FRX. The stability and the looks are off the charts. Thanks Mr. Rose for the design.

I can't wait for a 12 string Floyd rose bridge

has there been a left handed version yet?

I wonder if would work on a tele?

Legend. I am certain he doesn't need the $ but still inventing and giving online tutorials. I think he should post videos of his EVH stories. This is a truly awesome invention. I love a floyd just for tuning stability. My music room is humidity controlled so I can tune a guitar, lock my floyd, pick up a month later and still in tune.

This is a stupid bridge!!!! Why convert a Strat with two point bridge to a a 6 point bridge???? Just get a Wilkinson Gotoh. If you want a Floyd get a regular Floyd not this Garbage!!

A tutorial created by the creator- It doesn't get any better than this. I crave as much information on any given subject or procedure as I can possibly get, and this video certainly delivers. Outstanding Mr. Rose. This cemented my decision to buy one of these for my next build.