Видео

At least they've sorted you out, I'm keen on your update on the new one.

Any updates about the replacement they sent you? Did it arrive? Is it working properly?

@@Prec1gus yes its working. so something about the previous one they sent me the humidity sensor failed. I just started a new job last month so I have been busy with other things. I will do a review at some point.

Funny enough I thought about it.

the humididty sensors on the bottom of the unit so it would have to be upside down.

I work with temperature/humidity sensors all the time. Most of my projects use them and in fact, I just bought more stock. With the kind of airflow this box has, it shouldn't matter where the sensor is as long as internal air is flowing over/through it. I'd love to have a "broken" one of these so that I could disassemble it to see what's going on inside. Especially with airflow and mostly, which sensor they are using. They could be using a really cheap one that easily breaks down. Even the better ones can start to degrade where humidity sensing is concerned. This is why, in all my projects, I have an option to "calibrate" the sensors. I suspect that there's not enough airflow over this particular sensor and/or that the sensor has gone non-sensitive, which would explain why, when he blew right on it, it then responded. However, if the sensor is not defective, breathing on it should send it up into the high 80% and even into the 90% range. I test mine like that all the time and when they are working, the results are consistent.

@@BlondieSL If creality send me a new one I will send it to you if you pay for the shipping. Im waiting to hear back from them to see whats the next step. its good to know and makes sense even with air moving around that it should still see ambient humidity. i figured being in the center away from fast moving air would get better results.

@@CarsN3dPrinting That is a very kind offer. But with the price of shipping and where I am right now, it would cost more than the device. LOL As I have a food dehydrator, I think I'll make a project to modify it and turn it into a smart dryer. It sucks a lot of power (350 Watts) so I think I'd replace their standard element with one of those 12V high efficiency ones. While we do keep out house humid, so far, I haven't had too many issues with my filament. Again, thanks for that offer. Very kind for sure.

Thermistor is what senses temp. a humidity sensor is what the issue is. I think its a design issue. i have a odd feeling that those slits are whats causing the issue. I did contact them and working with them on the issue. I have already verified someone els is having the issue.

any update?@@CarsN3dPrinting

I reached out to them. "they will look into it"

@@CarsN3dPrinting great 😂, i bought one today but it wont be available till end of may, we can probably just move the sensor, and tbh, the sensor doesnt mean shit anyway, it shows the relative hum for the air, not the filament, so just put it in the amount of time required + 2H

@@Gagliano17 I understand its the relitive humidity in the chamber but that still repersents whats being released off the filament. 2 hours is a good start but Im not gonna belive or waste energy when it could dry faster. This is also a factor if you live in more humid state which means its gonna take even longer to dry. you cant move the sensore. its soildered to the board. I mean you can move it but whats the point for something you paid for that doesnt work. If you wanna throw your money at something that doesnt fully work go ahead. I dont belive in that moto.

www.printables.com/model/539417-chain-link-for-the-creality-k1-speedbump

www.printables.com/model/703318-k1-lid-riser-corner-with-bowden-tube-tunnel-jc-cre

www.printables.com/model/525295-jc-creality-k1-hinged-lid-riser

it works a charm! the ONE thing I changed and it helped.. The first TWO links at the hot end side, I made sure those first 2 links where the ones the can bend more/bend both ways.. its really helped there. Other than that. I like it so far!

facebook or discord?

@@CarsN3dPrinting Both if you don't mind!

I apologize for the late reply but the discord group is just "Creality" with their updated logo as the image. I'll be real honest with you, the Facebook group is toxic and just constantly filled with spam. If you want the best help/info/update go to the discord group. Candyman, Nikoli, Shima, and other people in the group are experienced vets at 3D printing and will help you out.

I know I know I know. Everyone in the creality discord group keeps telling me to root it. Maybe eventually I will.

GOOD ONE!!!! I def like that. If someone doesn't have a zip tip I will recommend this if they're doing this kind of mod.

Thank you for reminding me about what those are. I will admit when I got this I used those for the door handle lol.

Everyone in our discord group tells me I should convert over to orca. I maybe will eventually but im happy with I got right now. it works and I need simple right now. I have been hearing chat that theyre releasing a software update on our printer soon.

orcaslicer is awesome to use and i would consider it. they just released a new version today. Did your group mention when they will release it?@@CarsN3dPrinting

basically the smoother the transition of the filament tube, the less effort the filament extruder has to yank on the filament. Its preventing breaks within the tube with brittle filament, IE twinkle filament. You need to get a Humidity sensor or get a filament dryer. Dryers are like 101 with 3D printing. everyone needs one.

@@CarsN3dPrintingcould you show us clearly your chain links adjustments, I can see a bit the ones bend either way but could you show us what you’ve done. It seems to work well. If you have Reddit or something to post on if that’s easier?

@@DSPrints_ I uploaded the video

@@CarsN3dPrinting thank you sir!! 🙏

Yea I had messed with a couple of those. I actually kept a couple the other way because it makes sure that it will push up against the side when it swipes. after this video I did flip a couple more but not all of them are flipped. I noticed some of the clips were cut and some wernt so its interesting why then had a human flush cut them instead of just having them printed that way. I did use your deisgn for the gantry clips. I would recomend if possible to round out the center hole where the bowden tube is in so it allows it to flex a bit more and move back and fourth as needed. Otherwise I have been happy with your design.

I’ll look into a redesign, in the time being you could try the side clips that already have with all those properties you mentioned. I would recommend my side clip closed v2. Thanks, enjoy!!

are you talking about the bracket to relocate the runout sensor?

the side panels are not glass only the front door. the sides are a plexi

I believe the screws go "through" the side panels and not "into" the side panels, just a mater of semantics.

Creality K1