Видео

Hi John, the backhoe is mounted to the 3pt hitch and has a pump that attaches to the PTO shaft...we sure appreciate you watching!

Hi Anthony, it is a 52" deck...thanks for watching!

Hi Eddie, the Bobcat is fun to mow with. However, super hard to start when it's warm (we have to leave it run between lawns if the're close to each other). We bought a new Ferris is3200z with a 61" deck. Wow, that Ferris is night and day different. It's faster, much smoother (with 4wheel independent suspension) and way more powerful with a 35hp Kawasaki engine. But with all that, we still use the 52" Bobcat on smaller lawns. Plus, it has a stripe kit on it. Thanks for watching.

Great...thanks for watching!

Hi Guy, thanks for watching...Lotos claims you can cut 1" clean cut -Max Rated Clean Cut Thickness: 1". -Max Severance Cut Thickness: 1 1/2".

1in thickness easy. I got one 2018

Coach Harris does a nice job...Thanks for watching!

Thanks for watching...

Hi Tim, thanks for watching...we use these nail guns all the time and they are still working great! Unfortunately we only have a few good batteries left. As for the rest of the tools we replaced them with Dewalt. The main reason for replacing them was batteries and tool quality. Dewalt is a much better tool, but also more expensive.

The 2520 has 27hp and the 2025r has 24hp. The 2520 has a much more power and the hydraulics are much faster. Thanks for watching!

Thank you...we try to keep it as nice as possible. Thanks for watching!

Carters a great young man...Thanks for watching!

The mats in this video came from TSC. Thanks for watching!

Thanks for watching!

Thanks for watching... I envy you living in Florida! I watched you spreading the asphalt millings, I have done 4 or 5 driveways in the last month using the ground up millings.

@@jdtoys2768 Right now is our beautiful time in my opinion, but I grew up up north, my opinion is not shared with the natives😂.

Joey, I'm glad you were able to make your own!!! Great job! We have started to cut them with a band saw...this works well. Thank you for watching and commenting! Doug

Jason, We really like the John Deere 2520...however, we just sold it to Patrick (and he seems to love the extra power and faster hydraulics than their 2025R) and replaced it with a 2016 2032R with 135 hours on it. Thanks for watching, Doug

Hi John, it was great to talk with you...enjoy your new wings and cutting edge. (John decided to make his own). We love it when people can make their own things! Thanks for watching, Doug

Thanks John and I sure appreciate you watching. I see your really enjoying your new tractor! Very nice! Thanks, Doug

Hi John, you can email us at crawfordironworks@gmail.com, thanks for watching!

@@jdtoys2768 Hello I keep trying your email with no response I’d be interested in buying a set of the rubber wings extensions please contact me thank you John

Thanks John and thanks for watching!

That is awesome! I can hook you up with all kinds of information and attachments for John Deere 430's. Thanks for watching.

2008, Do you have a mid mount mower for yours? You have the snow plow, a quick attach and there's another bracket the quick attach bracket attaches to that you will need. I have a mid mount mower, so I bought the bracket that allows you to attach your mower, otherwise you will have to change the bracket when you go from the snow plow to your mower. Hope that helps. Let me know if you need part numbers. Thanks for watching our video!

@@jdtoys2768 No mower, no bracket either.

You too, hope you enjoyed the fireworks!

Thank you for watching!

Thanks, John! I see you had some great news with your 100th video!!!

@@jdtoys2768 I was very blessed!! Thanks!

Glad you enjoyed it!

Yes, the drill/drivers have worked great and we haven't had any problems with them.

@@jdtoys2768 Yeah just went w/Ryobi instead lmao I was at HD shopping for something else and they had a drill/impact and string trimmer on clearance for $70. I know very weird combo kit. But I'm going to sell the trimmer so really I walked away w/a $50 purchase :D

@@tuanh_duong Nice!

Bobby Morris yes they were pretty worn out, I put new ones on last November.

The Palmer Divide the backhoe is a Mazzotti 200.

@@crawfordironworks166 Thanks!

qfdforme It seems to be the best we’ve tried. It doesn’t wear out fast and is still strong enough to move heavy snow and light gravel.

Half inch rubber will work fine. The curvature of the blade will give it plenty of strength. We cut up to 12" wide wings with 9" beyond the blade edge with 1/2" non-re-enforced rubber.

Do you sell 6” precut wings and cutting edge? No holes need since I already have holes drilled in the plow for Artillian wings.

qfdforme I used a harbor freight multi tool that vibrates with a knife attachment. I believe we used 5/8 bolts.

We use 5/16" bolts for both the wings and cutting edge when using 1/2" rubber. For the wings the top 4 bolts are 1 1/2" and the bottom bolt is 2 1/2" in length if you install a rubber cutting edge. You can a 5/16" X 2" bolt in the bottom of the wing if not using a rubber cutting edge. We cut our reinforced rubber with bandsaws. You can cut your 1/2" rubber with a utility knife and a straight edge making several cuts...remember to keep your hand and fingers away from or behind the blade. Use proper safety gear and use common sense...be safe!

The price is better than Dewalt or Milwaukee and most of the Porter Cable tools work well. After a year and half of using the Porter Cable tools I still find myself buying Dewalt tools. With that being said, the Porter Cable drill, drivers, sander, multi-saw (I really like blade release), 4 1/2" grinder (bought separately) and light have worked great! No issues! The Reciprocating saw (saws-all) cuts but really vibrates, the jig saw cuts things well...it just doesn't cut straight (you have to aim it to the right). This I replaced with a Dewalt (which cuts great and straight)! And finally the circular saws...these did not hold up at all, had them all lock up and /or burn up the motor during normal use. After the third time having them repaired I ask Porter Cable to replace them with a better saw...thankfully they sent me two new saws different model which have worked great so far!

Hi Kevin, Yes we can make wings and cutting edges for the 60" blades. How do you like you 60" blade? Does the 1025R handle it ok?

@@jdtoys2768 seems to handle it fine. I don't have any experience with a 54" blade to compare. I'm using it when it's not ideal to use my 54" blower. What's the best way to talk more about details for my plow. Thanks

Hi Kevin, email Doug at crawfordironworks@gmail.com and include your name & phone number.

Hi Brandon, if you decide to make a set of wings and cut them as you indicated, I would love to hear how it works and maybe a picture of it. Cool idea!

I signed up to join your group...pending! Jan. 2020.

krmcc01 Wow! I will definitely keep that in mind when buying tools in the future! As far as the cordless tools they have worked fine with daily use except for the circular saws...had sent one in for repair, then they both started smoking and quit working so, I finally ask for a replacement...so far they are working.Thank you for your comment.

That is just not true. I don't know where you bought the saw you bought with porter cables name on it. But I have to tell you your wrong porter cable was bought out and tock over by dewalt and I say just like any other brand they have some good and some not so good tools but none the less there fair priced and most I've used have been decent tools to work with

Dave V thank you for your comment. The new Porter-Cable circular saws they sent to replace the defective saws have worked great so far!

@@dvogel218 I don't care if they were bought out by Dewalt, I talked to the Porter Cable factory in TN and they told me that they licensed their name to the company that made the TYPE of saw that I had. The company is called Chang Type and they sent me a recall notice through the mail so yes it is the truth.

@@krmcc01 ya okden