Видео

Hi, thank you for your comment. This is a good question. You can try to install a PA system by using the four methods below. Method 1. Using four EON718S subwoofers in cardioid position and placed in the center facing the audience while the EON715 position is placed left and right (2 left & 2 right). Method 2. Using two EON718S subwoofers in a cardioid position placed on the left and right together with the EON715 (2 tops + 2 subs on the left and 2 tops + 2 subs on the right). Method 3. Using the two EON718S subwoofers not in cardioid position placed on the left and right together with the EON715 (2 tops + 2 subs on the left and 2 tops + 2 subs on the right). Method 4 Uses two subwoofers in cardioid position and placed in the center facing the audience while 1 subwoofer is placed on the left and 1 subwoofer is placed on the right together with the EON715. However, the method of installation of this PA system depends on the location and atmosphere of the event at your venue. You can choose any of the above methods and I will explain how to connect the cables from the mixer to all the speakers. Please support my RUclips channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗

@@jblsoundbiz instal cable Chanel & Pass Thru

Make Video tutorial please set up normal or set cardioid with mixer use 4 pcs Jbl eon 15 and 4 pcs Jbl eon 718, simulation

@@MiswarSaputraBurhan Hi, thanks for replying to this comment. I am happy to make a tutorial video for this kind of PA System setup, but I don't have enough EON718S, I only have 2 pcs. For EON715, I already have 4 pcs at the moment. But don't worry, I will make a tutorial video for 4 pcs of EON715 speakers and 2 pcs of EON718S Subwoofer in the next video. So, stay tuned and subscribe to my RUclips channel for the next video. Thank you so much for your support and have a nice day! 🤗

@@jblsoundbiz U Have instagram ?

Hi, thank you for your comment. This is a good question. You can try to install a PA system by using the four methods below. Method 1. Using four EON718S subwoofers in cardioid position and placed in the center facing the audience while the EON715 position is placed left and right (2 left & 2 right). Method 2. Using two EON718S subwoofers in a cardioid position placed on the left and right together with the EON715 (2 tops + 2 subs on the left and 2 tops + 2 subs on the right). Method 3. Using the two EON718S subwoofers not in cardioid position placed on the left and right together with the EON715 (2 tops + 2 subs on the left and 2 tops + 2 subs on the right). Method 4 Uses two subwoofers in cardioid position and placed in the center facing the audience while 1 subwoofer is placed on the left and 1 subwoofer is placed on the right together with the EON715. However, the method of installation of this PA system depends on the location and atmosphere of the event at your venue. You can choose any of the above methods and I will explain how to connect the cables from the mixer to all the speakers. Please support my RUclips channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗

@@jblsoundbiz 🙌🏻🙌🏻🙌🏻

Tq so much bro 👍😉

Hi, Thank you for your comment. Yes, you can. ☺

Hi, thanks for your comment, Yes, you can. You can watch my video here ruclips.net/video/Vk3ieLtApPI/видео.html Please support my RUclips channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗

Hi, thanks for your comment, The bass sound gets louder as the volume increases on the JBL EON718S. Please support my RUclips channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗

Hi, Thank you for your comment. I'm glad that this video could give you some inspiration. I hope you can support my RUclips channel by subscribing and clicking the LIKE button on this video. I really appreciate your support. Thank you and have a great day! 🤗

Hi, Thank you for your comments. Your problem is the same as mine using JBL Connect Pro App v2.00.00. I also can't rename groups, even in demo mode. I have emailed JBL and am awaiting their response on this issue. I am also waiting for the next software update for this JBL Connect Pro App and hope it will fix the problem. 🤗

Hola, Gracias por tu comentario. En primer lugar, instale la última versión de la aplicación JBL Pro Connect App v.02.00.00. En segundo lugar, actualice el firmware v5.1.3.0 del subwoofer JBL EON718S. Luego reproduce tu música y comprueba si la luz del limitador sigue encendida o no. Tuve este problema antes, pero después de actualizar el firmware y la aplicación JBL Pro Connect, la luz del limitador ya no está encendida. No olvides apoyar mi canal de RUclips haciendo clic en los botones SUSCRIBIR y ME GUSTA de este vídeo. Gracias y te lo agradezco. ¡Que tengan un buen día! 🤗

Hola, Gracias por tu comentario. En primer lugar, instale la última versión de la aplicación JBL Pro Connect App v.02.00.00. En segundo lugar, actualice el firmware v5.1.3.0 del subwoofer JBL EON718S. Luego reproduce tu música y comprueba si la luz del limitador sigue encendida o no. Tuve este problema antes, pero después de actualizar el firmware y la aplicación JBL Pro Connect, la luz del limitador ya no está encendida. No olvides apoyar mi canal de RUclips haciendo clic en los botones SUSCRIBIR y ME GUSTA de este vídeo. Gracias y te lo agradezco. ¡Que tengan un buen día! 🤗

Hi, Thanks for your comment, I have never measured sound volume up to 110db with an SPL meter. However, I am sure that the limit light will not come out even if the sound has reached 110db. Maybe in the next video, I will measure up to 110db for a PA system setup like this. Don't forget to support my RUclips channel by clicking the SUBSCRIBE and LIKE buttons on this video. Thank you and I appreciate it. Have a nice day! 🤗

@@jblsoundbiz thanks for the reply! Definitely gonna check your video out, subscribed!

Hello, Thanks for your comment. Good question. I have never thought about playing songs from Spotify on my iPhone and connecting via Bluetooth to the JBL EON715. I will try it first and let you know how it goes. Thanks and have a great day! 🤗

@@jblsoundbizdoes it work?

Hi, thanks for your comment. I have tested with my Bluetooth iPhone playing songs from Spotify. Both JBL EON715 speakers can play songs with a TWS connection. I will make this video tutorial in the future. So please subscribe to my RUclips channel so you don't miss my next video, thanks, and have a great day! 🤗

Hi there, I have tested with my Bluetooth iPhone playing songs from Spotify. Both JBL EON715 speakers can play songs with a TWS connection. I will make this video tutorial in the future. So please subscribe to my RUclips channel so you don't miss my next video. Thanks and have a nice day! 🤗

Hi, thank you for your comment, Good question. Both can be used but many people use the dual Y 1/4 and I am not sure why. Maybe one of the sound engineer who read this comment can explain this. ☺

Hello, Thanks for your comment. Here is a response to your comment. Limit LED Lights ```````````````````````` This JBL EON718S subwoofer needs to be updated to the latest firmware to fix the LED limit issue. Mixer Amplifier + Passive Speakers + JBL EON718S ````````````````````````````````````````````````````````````````````````` Connect the mixer signal output (XLR cable) to the JBL EON718S subwoofer CH1/CH2 inputs. Open the JBL Pro Connect application and adjust the EQ to your preference. You can also try the preset EQs provided or create your own custom EQ. I hope I was able to answer your questions and if you don't mind, please give my videos a thumbs up and subscribe to my channel. Take care. Have a great day 😉.

@@jblsoundbiz Does the sub really have big bass? Because I have 2 Jbl JRX 225 speakers and I don't know if it would really make such a big difference in terms of bass. What do you think?

Hola, Gracias por tu comentario. Ambos parlantes tienen muy buen sonido. Pero yo elegiría el EON712 porque tiene la flexibilidad de ajustar el ecualizador. El IRX112BT sólo tiene unos pocos ajustes preestablecidos de ecualizador y no se puede cambiar. Espero haber podido responder tu pregunta y, si no te importa, deja un me gusta en mi video y suscríbete a mi canal. ¡Cuídate y que tengas un buen día! 🤗

Hi, thanks for your comments. Yes, that's right, you can also connect the XLR cable L and R from the mixer output to the Speaker No.1 input (CH1 and CH2) and the PassThru to the Speaker No.2 input (CH1 or CH2). I hope I was able to answer your question and if you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a nice day! 😉

Thanks so much! I will test this weekend. Setting these up for an event on south beach. Just using the two speakers & one microphone. No instruments being used. ✌🏻

@@miguelcoka You're welcome! Have a great weekend!

Yes, that's right. You need to connect both channels to the subwoofer via pass-thru if you want to play the sound in left and right stereo. You can also use one of the pass-thrus from either speaker connected to the sub. If you don't mind, please subscribe to my channel and click the like button on this video. Take care and have a nice day! 🤗

Hi, thanks for your comment. Yes, it's true. You need to connect both channels to the subwoofer via pass-thru if you want to play the sound in stereo left & right. If you don't mind, please subscribe to my channel and click the like button on this video. Take care and have a great day! 🤗

Hi, thank you for your comment, Yes, you can. You can connect the XLR cable from the DJ controller to the CH1 input of the HOST speaker, and you can connect to the REMOTE speaker via TWS. Don't forget to click the LIKE button on this video and subscribe to my channel. I appreciate it. Thank you and have a great day today! 🤗

Hi, thank you for your honest comment. I appreciate it. When this video was produced, I admitted many mistakes as you said. However, I try to improve from time to time to produce better videos. Again, thank you very much for your comments. Maybe you can watch my latest video here ruclips.net/video/Vk3ieLtApPI/видео.html and wait for your next honest comment. Take care and have a great day! 🤗

Hi, Thank you for your comment. This has happened to my JBL EON715 speakers. When the music starts playing, a POP sound is heard and then disappears as the music plays. However, not all the songs I play have a POP sound. I am not sure what is causing the POP sound. The only thing I could do at that point was make sure all the XLR connections from the mixer to the speakers were securely connected with no loose wires. I also updated the firmware to the latest version. So far I haven't heard the POP sound. I hope this answer helps you a bit. Have a good day my friend! 🤗

@@jblsoundbiz thanks bro I’ll try that. Do you think turning the DB gain up in the settings will help?

@@Litcentral09 I don't think so. Maybe you could try setting the EQ to flat first and then slowly turn up the volume fader and see if the pop sound still comes out. 😊

Yea I tried putting it on flat and it’s still doing that. I’m thinking maybe it’s time for a new speaker.

Hello friend, Can you play a song that has a "pop sound" using Bluetooth from your PC? and set the EQ to flat on that speaker. I wonder if the problem is still the same.

Hi, thank you. Thanks for your comment. I use Lenovo Tab P11 Plus with Android OS. You can use your SAMSUNG phone as long as it uses Android OS. Have a great day, friend! 🤗

Hi, thanks for your comment, Song Name: Clarx & Harddope - Castle [NCS Release] If you haven't subscribed to my channel yet, please do so. Thanks for your support. I really appreciate it. 😊

Hello, thanks for your comment. If you want to install monitor speakers, let's say you are using JBL EON712 as a monitor, you can connect a TRS cable from the Yamaha MG10XU Female Stereo Out TRS mixer to the JBL EON712 speaker monitor. You can control the volume of the JBL EON712 using the JBL Pro Connect app. For the microphone, you can plug it into any channel 1 through 4 on the Yamaha MG10XU mixer, and you can control the volume on the mixer. I hope this answers your question. Don't forget to support my RUclips channel by clicking the SUBSCRIBE and LIKE buttons on this video. Thanks and I appreciate it. 🤗

@@jblsoundbiz thank you !!

Hi, thank you for your comment. The EON718S cannot play sound without a wired input. You should use the cable from the Pass-Thru EON715 and connect it to the input of the EON718S. I hope I was able to answer your question. Have a great day, friend! 🤗

@@jblsoundbiz that’s what I was thinking I just wanted to make sure I’m a newbie 😂 thanks for the help🤙🏻

@@daxtonriggle3129 It's okay, friend. I am happy to help 🤗

Hi, thanks for your comment. Can you check the Bluetooth version on your laptop? If your laptop's Bluetooth version is below v5.0, e.g. v4.2, then your laptop may be experiencing lag issues. The EON715 has Bluetooth v5.0. Your laptop's Bluetooth version should be at least v5.0 or higher. Also, make sure your speaker firmware is updated to the latest version. I hope I was able to answer your question. Have a nice day, my friend! 🤗

@@jblsoundbiz Ty

Hi, thanks for your comment. As far as I know, the cardioid subwoofer mode can only be used when two subwoofers are used side by side. It is not effective when using only one subwoofer. I hope I could answer your question. Have a good day, my friend! 🤗

@@jblsoundbiz nice talk with you too. I'll stick with Eon 710's with 718's soon😊

@@HAIYANE9910 Thank you, friend, If you have more budget, I recommend you buy the EON712 instead of the EON710 if you want to combine it with the EON718S. 🤗

@@jblsoundbiz thanks, cuz i want some stereo system that has easy to setup. Not too heavy, and sounds more on clarity:)

And I want to know if cardioid works with 2 subs opposed, but using pole mount for tops:)

Hi, thanks for your comment, friend. What I did in this video is actually what is recommended by JBL in the EON 700 Series manual. You can connect from the mixer to the subwoofer and out to the top speakers if you want. ☺

Hi, thanks for your comment, friend. What I did in this video is actually what is recommended by JBL in the EON 700 Series manual. You can connect from the mixer to the subwoofer and out to the top speakers if you want. ☺

Thank you my friend! 🤝😊

Hola, gracias por su comentario. Lo siento. Haré el próximo vídeo con voz en inglés. Puedes hacer clic en los subtítulos del vídeo y traducirlos al español. Tal vez puedes probar este video ruclips.net/video/Vk3ieLtApPI/видео.html ¡Que tengas un buen día amigo! 😊

Hello, my friend. Good question! It's hard to explain here. I will make a tutorial video about your question in the next video. So stay tuned my friend ! 🤗

There's an icon on the top right corner it's the "chain" On ipad Setup / House icon on the right side Then top rightnis a lock, location, chain icon. Hit chain

Hi, thanks for your comment. It depends on what you want to pair with the top speakers (HPF-SPKR and LPF-Mix Out). For example, if you set the top speaker with HPF to 80hz and LPF to 120hz, then the subwoofer's Parametric EQ can be set between 120hz to 80hz. If you want to use Cardioid EQ, you must have two subwoofers and place them next to each other. Subwoofer 1 (facing the audience) is set to 100hz and subwoofer 2 (rear facing) is set to Cardioid EQ. You can watch this video on how to set up a Cardioid mode subwoofer. ruclips.net/video/h26IfFfUQMY/видео.html I hope I can answer your question. Thank you very much for your support of this channel (SUBSCRIBE and LIKE). I appreciate it. Have a great day my friend! 🤗

Thank you for answering. Here is an example of my set up on the left side I have a Prx15 speaker with a PRX18XFL sub . On the right side I have a eon718s and a Eon715 speaker. Now the eon speakers I followed your tutorial from the video to set those up.

Oh yea I also figured out how to group the speakers thank you 👌🏾

Also in the future can you do some videos on the 900series ?

@@Litcentral09 Nice! Well done my friend! 👏👍

Hi, thanks for your comment bro. I'm glad my video can help you. If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗

Hi, thanks for your comment. Yes, that's right, I also feel that the sound is a bit louder when using Bluetooth than when using an XLR cable. I don't think it's a problem. In my opinion, it may be because XLR cable has impedance compared to Bluetooth. If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗

Hi, thanks for your comment. I'm not sure what you mean. Can you explain what you mean by that list of audio equipment? Forgive me if I am wrong. 😊

Thank you ❤

Hola, gracias por tu comentario. Si ambos subwoofers están en modo cardioide, entonces ambos subwoofers deberían estar ajustados a ese ecualizador. Espero poder responder a tu pregunta amigo. 🤗 ¡Si no te molesta, dale like a mi video y suscríbete a mi canal. cuídate y que tengas un excelente día! 🤗