Hi First of all, thank you for this video and detailed explanation bringed with a smooth music. I am planning to buy this setup. I already ordered the 2 speakers EON715.... and I will for sure order the EON718S. I would like to know your point of view concerning this configuration of connection : 1- Connect the mixer (Yamaha MG) R and L "out" to the EON718S on CH1 and CH2 2- then 2.1- connect EON718S passThru 1 to Speaker EON715 CH1 2.2- connect EON718S passThru 2 to Speaker EON715 CH2 In this configuration we can spread the speakers from subwoofer with less length of cable if we keep the EON718S near the Mixer (Yamaha MG). and we give possibility to add other satellites (speakers EON715) interconnected to the others with passThru Thank you for your feedback
Hi, thanks for your comment. You can use that connection configuration. I agree this would save using a long XLR cable. But please remember that you must set the signal delay between EON718S and EON715 to about 1.1 feet per ms. Anyway, thanks for your thoughts on configuring this connection. I appreciate it. I will make a video of this type of configuration and see how it sounds. If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗
You shouldn't do that for proper results. It's also not recommended. I understand your point and did this many years with active speakers that have a passive frequency filter. Out the mixer, sub one, sub two, top. But that isn't the way it works with this. Because the Top has all the possible Mix Out options, the sub hasn't, so always from mixer to the top and then add the subs.
i have the same speakers but i was wiring them differently, how you did it it actually sounds alot better and the clipping is actually gone. thank you!
Hi, Thank you for your comment. I'm glad that this video could give you some inspiration. I hope you can support my RUclips channel by subscribing and clicking the LIKE button on this video. I really appreciate your support. Thank you and have a great day! 🤗
Yes, that's right. You need to connect both channels to the subwoofer via pass-thru if you want to play the sound in left and right stereo. You can also use one of the pass-thrus from either speaker connected to the sub. If you don't mind, please subscribe to my channel and click the like button on this video. Take care and have a nice day! 🤗
Hi there. Very informative video. Which brand tablet are you using to run the pro connect app? Reason i asked is that i can use the app on my samsung phone but not with my amazon firehd 10 tablet.
Hi, thank you. Thanks for your comment. I use Lenovo Tab P11 Plus with Android OS. You can use your SAMSUNG phone as long as it uses Android OS. Have a great day, friend! 🤗
Hola! Muchas gracias por tu video. Yo también tengo un JBl 718 y dos JBL 715 como sistema de audio. Soy músico y toco en eventos en vivo. La cuestión es que estoy notando que algunas personas conectan las bocinas de 15 a la mezcladora y de las bocinas de 15 conectan al Sub 718. Yo, por recomendación de las personas que me vendieron el equipo, conecto la consola al canal 1 y 2 del Sub de 18 y de las salidas Thru del Sub de 18 conecto al canal 1 de cada una de las bocinas de 15. Qué diferencia hay entre las dos conexiones? Que es más recomendable? Conectar el Sub a la mezcladora o conectar las bocinas de 15 a la Mezcladora y de ahí pasar la señal al Sub? De antemano muchísimas gracias.
¡Hola! Gracias por tu comentario. Puedes hacer los dos tipos de conexiones. (1) Mezclador al EON715 y pass-thru al EON718S (sub). (2) Mezclador a EON718S y pass-thru al EON715 (superior). Muchos de mis amigos, incluso vendedores de equipos de audio, me sugirieron que primero lo conectara del mezclador al EON718S y luego al EON715. Pero, para mí, prefiero seguir el manual de la serie JBL EON700 que dice que el mezclador debe ser conectado a la EON715 primero y luego a la EON718S Sub. A través de este método, puedo utilizar la ventaja de configurar el crossover (HPF y LPF) en el paso de salida de la EON715 de acuerdo a la configuración que quiero. Espero poder responder a tu pregunta amigo. 🤗 Si no te importa, por favor, dale un pulgar arriba a mi vídeo y suscríbete a mi canal. ¡Cuídate y que tengas un gran día! 🤗
Hi, thanks for your comment, You can use 2 x JBL EON715 speakers for an audience of 150 - 250 people in a large room. You can also add 1 or 2 x EON718S Subwoofer. If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
I'm curious how it is that you go that way from the mixer? Wouldn't it be better if you go from the mixer (L/R) directly into the sub and then distribute from the sub out to the speakers?
Hi, thanks for your comment, friend. What I did in this video is actually what is recommended by JBL in the EON 700 Series manual. You can connect from the mixer to the subwoofer and out to the top speakers if you want. ☺
Hello there great video, i am looking for a subwoofer which can be used outdoors as well. I am confused between JBL EON718S and BOSE SUB 2. please help me out in getting some feedback about JBL EON 718S. Which one should I buy?
Hi, thanks for your comment. Sorry, I can't do a review on the BOSE SUB 2 for me to compare with the JBL EON718S subwoofer. You can use this JBL EON718S for outdoor events with an audience of 150-250 people. What I like about this JBL EON718S is that you can update the firmware from time to time using the JBL Pro Connect app. The latest firmware has made many improvements to the sound quality. If you buy 2 of these JBL EON718S, you can do cardioid mode. The bass sounds bigger and more pounding. Watch this video ruclips.net/video/h26IfFfUQMY/видео.html (I already did a sound test for the cardioid mode setup). I hope you got some information about my review of JBL EON718S. If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
Hi, thanks for your comment, I'm sorry, I can't give a comparison between EON715 and partybox1000 or partybox710 because I don't have this partybox1000 or partybox710 on me. If I already have it, I will make a video for the sound test of these three speakers in the next video. If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
It depends on how you want to use it at your event whether it's for a DJ Party or Live Music. The JBL EON Series speakers can be used for both events but for the JBL PartyBox, it may be more suitable for use at DJ Parties. This is just my opinion. However, it depends on your budget. Take care and have a great day! 🤗
Hola! Gracias por tu comentario, Sí por supuesto que puedes. 😊 Al utilizar la aplicación JBL PRO Connect, puede configurar ambos altavoces al mismo tiempo.
Hi, today's video is a sound test using 2 x JBL EON715 full-range speakers and 1x JBL EON718S Subwoofer. Which sound recording is good? smartphone or DSLR camera? Please leave your comments here. Have a great day ! 😉
@@tsetannamgyal Hi, thanks for your comment. The Sony SRS-XV900 is a good speaker but I don't have this speaker to compare with my JBL EON715/718S in terms of sound quality testing. What I can conclude, Sony SRS-XV900 is more suitable for home theater, DJ & Karaoke with a small group of people. This JBL EON 715 / 718S is more than all that. It can also be used on stage performers and sounds louder than the Sony SRS-XV900. Hope I can answer your question. If you don't mind, please click LIKE my video and please SUBSCRIBE to my channel. Have a great day today! 🤗
@djdwade Hi, thanks for your comment. Both channels 1 and 2 can be used. When I made this video I saw channel 2 so I decided to select that channel 😅. If you don't mind, please click the LIKE button and SUBSCRIBE to my channel. Thank you for your support. Take care and have a nice day! 🤗
@jblsoundbiz The recording with Xiaomi 11T has more bass and you can feel the thump of the song whereas in the Nikon DSLR the audio was clear but it was somewhat flat and you can't feel the bass.
Hi, thanks for your comment, Yes, you can. You can watch my video here ruclips.net/video/Vk3ieLtApPI/видео.html Please support my RUclips channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗
Hi, thank you for your comment. In my experience, this front green LED will flash if there is firmware update activity or when you perform Bluetooth Control Pairing using the JBL Pro Connect app. If you don't mind, please give my videos a thumbs up and subscribe to my channel. Take care and have a great day! 🤗
Perdona mi pregunta tal vez sea tonta, pero pienso que me estafaron porque la luz led de color verde en mi monitor no prende tan intenso como el tuyo a que se debe? :c
¡Hola! Gracias por tu comentario. No estoy seguro acerca de las luces LED de su altavoz. Te sugiero que tal vez puedas preguntar en la tienda donde lo compraste. Pídales que comparen sus altavoces con los de ellos. Si hay una diferencia, puede reclamar la garantía.
Hi, thanks for your comment. First of all, you need to update the latest firmware on the JBL EON718S subwoofer using the JBL Pro Connect app. If this limiting issue still occurs after you perform a firmware update, please let me know. If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗
Hi, thanks for your comment. I will do a sound test with the configuration you suggested once I have the EON712 sooner or later. Anyway, thanks for your advice and guidance. I really appreciate it. If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
Hi, thanks for your comment. The Sony SRS-XV900 is a good speaker but I don't have this speaker to compare with my JBL EON715/718S in terms of sound quality testing. What I can conclude, Sony SRS-XV900 is more suitable for home theater, DJ & Karaoke with a small group of people. This JBL EON 715 / 718S is more than all that. It can also be used on stage performers and sounds louder than the Sony SRS-XV900. Hope I can answer your question. If you don't mind, please click LIKE my video and please SUBSCRIBE to my channel. Have a great day today! 🤗
Oi, obrigado por seu comentário. Você pode ver o preço aqui;- JBL EON715: www.jbl.com/portable-pa-systems/EON715-NA-LS.html JBL EON718SL: www.jbl.com/portable-pa-systems/EON718S-NA-LS.html?cgid=undefined Se você não se importa, dê um joinha no meu vídeo e se inscreva no meu canal. Cuide-se e tenha um ótimo dia! 🤗
You trippin bro . I’m Team JBL all day and got 2 15’s tops and 2 18’s subs. After watching this dude videos and setting up my sounds the right way they sound awesome. This video helped the way my speakers are suppose to sound a lot. I also learned a lot. You not gon get the full experience from watching a video ppl are going to have to trust and go get the speakers themselves and listen.
@@Litcentral09 How am I tripping I said it sounded like it's out of phase and that's how it sounds. Maybe you hear something different, but I hear what I hear. I'm a sound engineer and I know what out of phase sounds like. I like JBL too, that's why I said that these speakers shouldn't sound like that because I know thnat jbl's should sound better than they do in this video. A good thing to know is, I made a song that sounds really good on almost all my speakers and headphones but I played them on this one set of headphones and it sounded terrible. Those headphones were Klipsch headphones and they sound good on other things that I played through them but this one particular song did not sound good on them. The Bluetooth headphones that I played this track through makes the track sound out of phase. Maybe it will sound better if I use a different set of headphones. The other day I read a comment where someone said the music was too loud over the person's voice but the music sounded fine to me so I get where you're coming from. I didn't tell the person they were tripping though, I just told them that it sounded fine on my headphones. 😎
Hi
First of all, thank you for this video and detailed explanation bringed with a smooth music.
I am planning to buy this setup. I already ordered the 2 speakers EON715.... and I will for sure order the EON718S.
I would like to know your point of view concerning this configuration of connection :
1- Connect the mixer (Yamaha MG) R and L "out" to the EON718S on CH1 and CH2
2- then
2.1- connect EON718S passThru 1 to Speaker EON715 CH1
2.2- connect EON718S passThru 2 to Speaker EON715 CH2
In this configuration we can spread the speakers from subwoofer with less length of cable if we keep the EON718S near the Mixer (Yamaha MG).
and we give possibility to add other satellites (speakers EON715) interconnected to the others with passThru
Thank you for your feedback
Hi, thanks for your comment.
You can use that connection configuration.
I agree this would save using a long XLR cable.
But please remember that you must set the signal delay between EON718S and EON715 to about 1.1 feet per ms.
Anyway, thanks for your thoughts on configuring this connection. I appreciate it. I will make a video of this type of configuration and see how it sounds.
If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗
You shouldn't do that for proper results. It's also not recommended. I understand your point and did this many years with active speakers that have a passive frequency filter. Out the mixer, sub one, sub two, top. But that isn't the way it works with this. Because the Top has all the possible Mix Out options, the sub hasn't, so always from mixer to the top and then add the subs.
i have the same speakers but i was wiring them differently, how you did it it actually sounds alot better and the clipping is actually gone. thank you!
Hi,
Thank you for your comment.
I'm glad that this video could give you some inspiration. I hope you can support my RUclips channel by subscribing and clicking the LIKE button on this video. I really appreciate your support. Thank you and have a great day! 🤗
Does the sub actually require inputs from each speaker or can it use just 1 from “through” port?
Yes, that's right. You need to connect both channels to the subwoofer via pass-thru if you want to play the sound in left and right stereo. You can also use one of the pass-thrus from either speaker connected to the sub.
If you don't mind, please subscribe to my channel and click the like button on this video. Take care and have a nice day! 🤗
Hi there. Very informative video. Which brand tablet are you using to run the pro connect app? Reason i asked is that i can use the app on my samsung phone but not with my amazon firehd 10 tablet.
Hi, thank you.
Thanks for your comment.
I use Lenovo Tab P11 Plus with Android OS. You can use your SAMSUNG phone as long as it uses Android OS.
Have a great day, friend! 🤗
Hola! Muchas gracias por tu video. Yo también tengo un JBl 718 y dos JBL 715 como sistema de audio. Soy músico y toco en eventos en vivo.
La cuestión es que estoy notando que algunas personas conectan las bocinas de 15 a la mezcladora y de las bocinas de 15 conectan al Sub 718.
Yo, por recomendación de las personas que me vendieron el equipo, conecto la consola al canal 1 y 2 del Sub de 18 y de las salidas Thru del Sub de 18 conecto al canal 1 de cada una de las bocinas de 15.
Qué diferencia hay entre las dos conexiones? Que es más recomendable? Conectar el Sub a la mezcladora o conectar las bocinas de 15 a la Mezcladora y de ahí pasar la señal al Sub?
De antemano muchísimas gracias.
¡Hola! Gracias por tu comentario.
Puedes hacer los dos tipos de conexiones.
(1) Mezclador al EON715 y pass-thru al EON718S (sub).
(2) Mezclador a EON718S y pass-thru al EON715 (superior).
Muchos de mis amigos, incluso vendedores de equipos de audio, me sugirieron que primero lo conectara del mezclador al EON718S y luego al EON715.
Pero, para mí, prefiero seguir el manual de la serie JBL EON700 que dice que el mezclador debe ser conectado a la EON715 primero y luego a la EON718S Sub. A través de este método, puedo utilizar la ventaja de configurar el crossover (HPF y LPF) en el paso de salida de la EON715 de acuerdo a la configuración que quiero.
Espero poder responder a tu pregunta amigo. 🤗
Si no te importa, por favor, dale un pulgar arriba a mi vídeo y suscríbete a mi canal. ¡Cuídate y que tengas un gran día! 🤗
How many speakers are needed for large room with a gathering of more than 150 people? Please answer my question. 🙇
Hi, thanks for your comment,
You can use 2 x JBL EON715 speakers for an audience of 150 - 250 people in a large room. You can also add 1 or 2 x EON718S Subwoofer.
If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
I'm curious how it is that you go that way from the mixer? Wouldn't it be better if you go from the mixer (L/R) directly into the sub and then distribute from the sub out to the speakers?
Hi, thanks for your comment, friend.
What I did in this video is actually what is recommended by JBL in the EON 700 Series manual.
You can connect from the mixer to the subwoofer and out to the top speakers if you want. ☺
Good job bro thanks
Thanks a lot, bro! And thanks for your comment too. Hope you have a great day today! ☺
Hello there great video, i am looking for a subwoofer which can be used outdoors as well. I am confused between JBL EON718S and BOSE SUB 2. please help me out in getting some feedback about JBL EON 718S. Which one should I buy?
Hi, thanks for your comment.
Sorry, I can't do a review on the BOSE SUB 2 for me to compare with the JBL EON718S subwoofer.
You can use this JBL EON718S for outdoor events with an audience of 150-250 people. What I like about this JBL EON718S is that you can update the firmware from time to time using the JBL Pro Connect app. The latest firmware has made many improvements to the sound quality.
If you buy 2 of these JBL EON718S, you can do cardioid mode. The bass sounds bigger and more pounding. Watch this video ruclips.net/video/h26IfFfUQMY/видео.html (I already did a sound test for the cardioid mode setup).
I hope you got some information about my review of JBL EON718S.
If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
@@jblsoundbiz hey thank you for your reply. Can you also tell me how is the bass response on single 718S?
Hi, thanks for your feedback,
If you use a single JBL EON718S, the bass response will be Omnidirectional.
Take care and have a great day my friend! 🤗
@jblsoundbiz is eon715 better or partybox1000 or partybox710?
Hi, thanks for your comment,
I'm sorry, I can't give a comparison between EON715 and partybox1000 or partybox710 because I don't have this partybox1000 or partybox710 on me.
If I already have it, I will make a video for the sound test of these three speakers in the next video.
If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
@@jblsoundbiz I just want to know which one is a better option for using in events for 150 - 200 people.
It depends on how you want to use it at your event whether it's for a DJ Party or Live Music. The JBL EON Series speakers can be used for both events but for the JBL PartyBox, it may be more suitable for use at DJ Parties.
This is just my opinion. However, it depends on your budget.
Take care and have a great day! 🤗
eu consigo configurar a caixa sub e a caixa de voz pelo aplicativo ao mesmo tempo?
Hola! Gracias por tu comentario,
Sí por supuesto que puedes. 😊
Al utilizar la aplicación JBL PRO Connect, puede configurar ambos altavoces al mismo tiempo.
Hi, today's video is a sound test using 2 x JBL EON715 full-range speakers and 1x JBL EON718S Subwoofer.
Which sound recording is good? smartphone or DSLR camera? Please leave your comments here.
Have a great day ! 😉
which is better? 1*jbl eon 715 or 1*jbl eon 718s ?????
Or is Sony SRS - XV900X better??????
@@tsetannamgyal Hi, thanks for your comment.
The Sony SRS-XV900 is a good speaker but I don't have this speaker to compare with my JBL EON715/718S in terms of sound quality testing.
What I can conclude, Sony SRS-XV900 is more suitable for home theater, DJ & Karaoke with a small group of people. This JBL EON 715 / 718S is more than all that. It can also be used on stage performers and sounds louder than the Sony SRS-XV900.
Hope I can answer your question. If you don't mind, please click LIKE my video and please SUBSCRIBE to my channel. Have a great day today! 🤗
Why was channel 2 used instead of channel 1?
@djdwade Hi, thanks for your comment.
Both channels 1 and 2 can be used. When I made this video I saw channel 2 so I decided to select that channel 😅.
If you don't mind, please click the LIKE button and SUBSCRIBE to my channel. Thank you for your support. Take care and have a nice day! 🤗
@jblsoundbiz The recording with Xiaomi 11T has more bass and you can feel the thump of the song whereas in the Nikon DSLR the audio was clear but it was somewhat flat and you can't feel the bass.
Can you connect both 715 speakers via bluetooth to play the same song?
Hi, thanks for your comment,
Yes, you can. You can watch my video here
ruclips.net/video/Vk3ieLtApPI/видео.html
Please support my RUclips channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗
Hi I Just bought JBL EON 718S SUBWOOFER. THE FRONT LED IS Blinking/Flickering GREEN. PLEASE LET ME KNOW WHAT DOES THIS MEANS?
Hi, thank you for your comment.
In my experience, this front green LED will flash if there is firmware update activity or when you perform Bluetooth Control Pairing using the JBL Pro Connect app.
If you don't mind, please give my videos a thumbs up and subscribe to my channel. Take care and have a great day! 🤗
Perdona mi pregunta tal vez sea tonta, pero pienso que me estafaron porque la luz led de color verde en mi monitor no prende tan intenso como el tuyo a que se debe? :c
¡Hola! Gracias por tu comentario.
No estoy seguro acerca de las luces LED de su altavoz. Te sugiero que tal vez puedas preguntar en la tienda donde lo compraste. Pídales que comparen sus altavoces con los de ellos. Si hay una diferencia, puede reclamar la garantía.
I got this set up but my sub keeps limiting out at low volume. please help. what do I do ?
Hi, thanks for your comment.
First of all, you need to update the latest firmware on the JBL EON718S subwoofer using the JBL Pro Connect app. If this limiting issue still occurs after you perform a firmware update, please let me know.
If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗
2x712 +1x718 its better configuration🙂
Hi, thanks for your comment.
I will do a sound test with the configuration you suggested once I have the EON712 sooner or later.
Anyway, thanks for your advice and guidance. I really appreciate it.
If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗
👍👍👍👍👍🙏🙏
Thank you so much!! 😊
please let me know!
Hi, thanks for your comment.
The Sony SRS-XV900 is a good speaker but I don't have this speaker to compare with my JBL EON715/718S in terms of sound quality testing.
What I can conclude, Sony SRS-XV900 is more suitable for home theater, DJ & Karaoke with a small group of people. This JBL EON 715 / 718S is more than all that. It can also be used on stage performers and sounds louder than the Sony SRS-XV900.
Hope I can answer your question. If you don't mind, please click LIKE my video and please SUBSCRIBE to my channel. Have a great day today! 🤗
Valor desse modelo
Oi, obrigado por seu comentário.
Você pode ver o preço aqui;-
JBL EON715: www.jbl.com/portable-pa-systems/EON715-NA-LS.html
JBL EON718SL: www.jbl.com/portable-pa-systems/EON718S-NA-LS.html?cgid=undefined
Se você não se importa, dê um joinha no meu vídeo e se inscreva no meu canal. Cuide-se e tenha um ótimo dia! 🤗
nice🫡
Salamat sir. 🤗
@@jblsoundbiz welcome sir makikipindot din ng bell sir🫡🫡🫡✅
Almost sounds out of phase. This video will make people not want to buy and I doubt that these speakers sound like this.
You trippin bro . I’m Team JBL all day and got 2 15’s tops and 2 18’s subs. After watching this dude videos and setting up my sounds the right way they sound awesome. This video helped the way my speakers are suppose to sound a lot. I also learned a lot. You not gon get the full experience from watching a video ppl are going to have to trust and go get the speakers themselves and listen.
@@Litcentral09
How am I tripping I said it sounded like it's out of phase and that's how it sounds. Maybe you hear something different, but I hear what I hear. I'm a sound engineer and I know what out of phase sounds like. I like JBL too, that's why I said that these speakers shouldn't sound like that because I know thnat jbl's should sound better than they do in this video. A good thing to know is, I made a song that sounds really good on almost all my speakers and headphones but I played them on this one set of headphones and it sounded terrible. Those headphones were Klipsch headphones and they sound good on other things that I played through them but this one particular song did not sound good on them. The Bluetooth headphones that I played this track through makes the track sound out of phase. Maybe it will sound better if I use a different set of headphones. The other day I read a comment where someone said the music was too loud over the person's voice but the music sounded fine to me so I get where you're coming from. I didn't tell the person they were tripping though, I just told them that it sounded fine on my headphones. 😎