Видео

@@jaywillzo no, they stay on

@@matthewsanders8421 you're welcome!

@@lionintu you should!

@WorldMythology-f9m this video shows where they go

@Steven-z2d it can be done the same way i did with the stalk. If you want it to work with the sensor, positive wires to the fuse box and black wire is ground. Ground it to anywhere metal to metal

@robertoperalta633 my amp, has a smart turn on feature. In my video, my remote wire would be from the speaker signal, which you saw in the video. If you are gonna use my method of wiring, I'd recommend tapping into the front speaker for a strong output signal to the amp, which results in a stronger output from the amp.

@@angelapps927 link is in the description

@@32dWater works just the same as before

@@nickgangemi1787 thank you!

@rotheinstaller Thank you for making this. Get my 24 accord tomorrow and already ordered the badges. Was looking for an essy way to apply the accord logo. This is perfect!

@nickgangemi1787 you're welcome. I'm glad this was of help to you

@gamblersstory9081 the adjustment is on the side of the light fixture facing down. You need an allen key to perform the adjustment. The area is at the bottom

@kiingtez-6451 front right is easier to get to. It is located under the dash. In the door connection... I don't remember the color wires, remove the speaker to know the correct colors to tap into

@@iamerikr yes I do installs. Where are you located?

@@RTI876 straight down 65 in Nashville.

@@iamerikr I'm in Chicago

@ I’d literally drive to you to get this done right Are you on any other platforms so I could DM you?

@iamerikr ok. That's fine. I do charge for installs. DM me on Instagram @ro_g90

@@JSTNABRA Check the ground by the bumper. Make sure it's metal to metal. Some areas look like metal, but it's not. Just helped someone with the same problem.

the only thing i did not do was replace the OEM stalk..

Message me on Instagram. It's in my bio

@joemontalvo50 sorry but the hrv does not have fog light option

@@RTI876 thanks buddy ok

@@wingkeungngan85 I do not 🙂

@@carlosmanuelrochecantillo1226 thank you... the link is in the video description

@mlawrence2991 They are LED, so they will be uniform🙂

@@RTI876 thanks

@mlawrence2991 the ones I installed, yes, they are definitely worth getting. Visibility has improved greatly!... I recommend getting them

@@RTI876 do you know if these work on the 2025 CRV Sport L Hybrids 2WD? Just want to make sure as I know sometimes although the vehicles look the same, somethings are still different. Thanks for your earlier response.

@mlawrence2991 they do work. You would have to relocate the parking sensor tho. I have the hybrid video on my channel as well

@harleymaupin2607 so i heard the same thing and kept that in mind when doing mine. You need an efficient amp, meaning the amp doesn't pull alot of current, which would be better for the system. I think audiopipe is one of those amp that is not efficient. I'm really not sure, that's why I use kickers. They have great efficiency on the new amplifiers, I'm running an 800 in my car, and it sounds great

@JUSTINNNNare think you can get it on Amazon. Not sure where I got it

You know the size ?

@JUSTINNNNare i do not

Bought the terminal kit on Amazon. Nothing in the kit fits the stalk terminal. Any help ?

@JUSTINNNNare a.aliexpress.com/_mMMQ4QM. Try that link

@@kedronmarsh1773 that it is

@Jhou28 Yes, it stays on full time

@billy-jamesparadis4566 i just checked it and it is the same one in the video

Thanks so much for your help by the way but it looks like the wire that's attached to the port is hard wired where it looks like that wire on the amazon site has a usb female port or do you just connect that to the shell?

​@billy-jamesparadis4566 Yes, just slide it in the shell. That's all i did.

Oh thats great! I couldnt tell in your video so thank you and another thing, your video is appreciated so much because I went and asked Mikstore from the Philippines about their kit and they said it couldnt be done without losing the passenger air bag illumination sign so its been very nice to see you were able to do it and provide all the correct part numbers so thanks again! ​@rotheinstaller

Don't know if you'd be interested in this wireless phone charger but I am because the one that comes from the manufacturer is too small to fit my Samsung S21 Ultra w/case...any plans on making videos of something similar?

@@franksalazar9342 the headlight itself might be defective.

@@xulisvoosmuas they work just fine. No problem

@@strawdemindset it does

@@guitarplayerdre 19×8.5 & 245/40/19

? Doesnt your vehicle come with the sensor?

@davide1621 yes. Only cut the area i showed in the video. Do the wiring like i did in the crv ex video if you will be using the oem stalk

@xulisvoosmuas yes. It can be placed in the bumper as you see in the pictures. Also, yes, you would need the body colored sensor, which is not available in the U.S. you would also need the hole punch tool to make the new hole.

Where can I purchase the body colored sensor and hole punch tool?

@xulisvoosmuas i know College Hills honda sells the kit, but I'm not sure if they will sell just the sensor. Punch tool from mikstore

Ok thanks. Also, will these sensors (from college hills) work with factory parts?

@@xulisvoosmuas I'm not sure. Reach our to their service department for more info

@@BrandensOutdoorChannel 🙂

@levy35305 what do you mean by pin out?? 2. I did explain in the video, the blue and white wire connection. 3. I have no idea .

@@RTI876 sorry I just meant what each of the connector pin is for you knew that the pin next to the dark green cable was for front fog lights so was curious if you knew what the rest were. Like for rear fog , turn signals, high beam, low beam etc. For 3, how did u know that pin on that connector was for driving lights?

@levy35305 I don't know what the other pin slots are for... all the info I share, I learned from someone, or experimented on my own car. You can hit me up on IG if you got more questions or if you need more clarity on the setup

@Lenrage your red wire is your 12v. Just connect it to a 12v source.

@dennislegaspi2816 the switch activates the ground

@@RTI876 thanks😊

@parthpatel6251 No, they don't. The adjustment is on the side. Adjust them all the way down, then check it, and if they are too low, bring them u up a tad bit. Just not too high where it's blinding to on coming traffic

@@RTI876 Ok thanks, Do you know how much you turned it? or are there any recommendations that I can find ?

@parthpatel6251 mine was already adjusted. Didn't have to mess with it

@vinhxle80 Yes, but I didn't connect the turn signal. Only needed the drl

@Lenrage all I did was cut off the push button on/off switch, cut the wires at the relay, but at the length like I have in the video and Join the blue wire to the red fused wire

@@RTI876 thanks for quick response. Wound it be possible to keep the switch and still hook it up like you did with the steering wheel lever ?

@Lenrage yes, but it is not necessary to have both. You would have alot of excess wire to hide under the dash if you use the switch

@@RTI876 perfect thank you.....one last question. Wich one of the lights did you get with the ballast....are these the 35w or 40w. Website not really answering questions. Are these lights leds or bulbs. Thanks

@Lenrage I have the 35w, and yes, they are LED .

@@Dalmajian amazon. Link is in the description

Is the splitter compatible with the 10th generation of Civic? I can't confirm it in the description, so I'm going to buy it with AliExpress. Low tone part number, please.

​@Dalmajian I'm not sure if it works on the 10th Gen. And both part numbers are in the description

Cheap looking and it's more trouble to paint than replacing it.

@@CollinPuckett holds up very well. I also only use touch less car wash. Just a personal preference

@@parthpatel6251 35w. They are bright enough for me. They operate the same as before

@@RTI876 with the 35 W is it projector lamp or reflector lamp? I am guessing the 35 W comes with a ballast to plug in so it can lower that much Watts, correct?

@@parthpatel6251 I'm not sure what it is. I know they are very bright. I'm also not sure if the ballast lowers the watts

@@RTI876 thanks

@@parthpatel6251 get the 35w. It's been working with no issues

@@MJ3000Sp they do... I had actual photos at the start of the video. Get the fog lights

@aqechen9200 yes you can. Watch my hybrid video to see how it's done

@@ZavierMarquisOwens already did

@winningsince85 I've seen it done once, but the trade-off was alot of cuts and bruises

@@andyhuynh7933 I agree...

@eslamelbanna6145 I don't think you can change it