- Видео 134
- Просмотров 4 784 454
Mark Fox Outdoor Adventures
Добавлен 27 авг 2015
2000 Toyota Camry Tail Light Fix
Here is how I solved the problem of my non working tail lights. I had brake lights and side marker lights. The tail lights did not work at all. I found the common problem of broken wires near the trunk hinge. After fixing the broken wires the tail lights still did not work. Leading up to the tail light failure on occasion I smelled a burning plastic smell but could not find the origin. Another symptom was the dash would illuminate when the brake pedal was applied even without the key in the ignition. I checked the fuse to the left side of the vehicle under the steering wheel and it tested fine. I also show how to access the tail light bulbs and how to test and locate the fuse.
Просмотров: 61
Видео
PINK SALMON FISHING 2023
Просмотров 117Год назад
This is a compilation of videos I made when fishing for pink salmon in 2023. There are also a few videos showing the knot I use for tying my jigs as well as some techniques. As happens with each year I meet lots of fun people to fish around and there were plenty of fish to go around. Can't wait to go again in.
Stephen King's House Bangor, Maine
Просмотров 1,2 тыс.2 года назад
This is Stephen King's house in Bangor, Maine.
USS CONSTITUTION
Просмотров 822 года назад
The USS Constitution is the oldest ship still afloat. She was launched in 1797. She was the third built of the original six frigates authorized by the Naval Act of 1794. The Secretary of War Timothy Pickering submitted ten names for this ship one of which was "Constitution" to George Washington in March of 1795. The Constitution and her sister ships were more heavily armed and larger than other...
Edgar Allen Poe's House Philadelphia, Pennsylvania
Просмотров 3972 года назад
This is the last survived house of Edgar Allen Poe in the city of Philadelphia, Pennsylvania. He lived in many other houses in this area between 1838 to 1834. This house is located at 532 N. 7th Street. This was designated a National Historic Mark in 1962. He lived here for probably a year or less.
Gettysburg Battlefield Pennsylvania
Просмотров 1132 года назад
The battle of Gettysburg was fought in and around the town of Gettysburg, Pennsylvania July 1st, 2nd and 3rd of 1863. This battle known as the American Civil War was between the Union and Confederate soldiers. On the 1st day of battle which had conflicts at McPherson's Ridge, Oak Hill, Oak Ridge, Seminary Ridge, Barlow's Knoll and in and around Gettysburg consisted of around 50,000 soldiers of ...
Shootout at the OK Corral
Просмотров 4602 года назад
This is a re-enactment of the famous Shootout at the OK (Old Kindersley) Corral in Tombstone, Arizona. This was the famous shootout between Wyatt, Morgan, and Virgil Earp, and Doc Holliday (lawmen) and Ike and Billy Clanton and Tom and Frank McLaury, with Billy Claiborne (outlaws). The results of the shootout left Virgil and Morgan wounded and Holliday grazed by a bullet. Tom and Frank McLaury ...
Grand Canyon National Park
Просмотров 342 года назад
This video is from when I went to the Grand Canyon this year 2022. There are multiple videos and views from various lookout points along the Southern rim of the Grand Canyon. This is one of the 7 natural wonders of the world. The vast views of the seemingly endless canyon make it easy to see why. There are numerous hiking trails that lead down into the canyon as well as lookout points or rocks ...
Space Needle
Просмотров 793 года назад
This is the Space Needle located in Seattle, Washington. When visiting the Space Needle an elevator takes you up to the top of the needle where you have access to a rotating platform as well as an observation deck for photo opportunities. There are lots of views of downtown Seattle as well as the waterfront of the Puget Sound.
Chihuly Garden and Glass
Просмотров 883 года назад
This is the Chihuly Garden and Glass located in Seattle, Washington near the Space Needle. There are lots of glass sculptures in this museum as well as in their garden.
Salmon Fishing 2021
Просмотров 1 тыс.3 года назад
This is salmon fishing 2021 in the state of Washington. This year the Dash Point Pier was closed due to complaints of neighbors in the area claiming that the pier is unsafe. As a result I'm sure it will be closed for the upcoming years and fishing seasons as this has been the experience of some of the other docks in the surrounding areas. This is an abuse of power as any other fisherman will te...
Peninsula Park Rose Garden
Просмотров 713 года назад
This is Peninsula Park Rose Garden located in Portland, Oregon. This park provides many different colors and scents of roses. There are lots of great photo opportunities in this park. The best time to visit is spring or summer.
Crystal Springs Rhododendron
Просмотров 183 года назад
This is Crystal Springs Rhododendron Garden located in Portland, Oregon. As you walk through this garden you can view many different types of trees, plants and animals. There are also lots of scenic views that are great for photos.
Yellowstone Bear World
Просмотров 5 тыс.4 года назад
This is from my visit to Yellowstone Bear World in Rexburg, Idaho. If you would like to feed the bears you will pay about $12 per person to feed the bears from a bus. You throw the food from the second story of a bus onto the ground. They make a total of three stops during the feeding. First stop is by the Grizzly bears whom don't seem to care about the food. The second and third stops are for ...
Feeding Koi Fish
Просмотров 3274 года назад
This was a Koi pond located at Thanksgiving Point at Ashton Gardens in Lehi, Utah. You are able to feed the Koi fish food pellets. As soon as the food hits the water they go into a feeding frenzy. It is pretty cool to watch them swim over the top of each other to get to the food.
Cannibal Roller Coaster Farmington, Utah
Просмотров 2,8 тыс.5 лет назад
Cannibal Roller Coaster Farmington, Utah
Rest in peace to this wonderful establishment
That is very unfortunate. This was an awesome place to visit especially as a kid. I doubt there will be anything like it again for future generations to experience.
Could you just staple it to your side of the fence for an existing fence?
Yes you definitely can do that
This is exactly the solution I’ve been trying to find for years. Thank you!
You're very welcome. Glad this helps
Wow that Vegas from 7 years ago😮 seen that rbk for sure
It was actually Tucson under the side of Mcdonalds off of Broadway and Wilmot.
@markfoxoutdooradventures9621 Vegas is the dude's name he graffitis Vegas yo 😂😂👌 there was a big Vegas "piece" . I've seen it in person years ago when I lived in Tucson his work and was in prison with him one time. Saw that RBK fo sho that Real Bad Company, them Real Block Kings, Rude Boy Klick, and of course dog you can't forget Ride BMX Kid!
ok I got you lol. I thought you was referring to location.
Omg. So you just pryed out the sensor and it came off? I managed to get the sensor housing off but not the sensor itself. I was looking or rather feeling for clips to pop with a screw driver but nothing. I gave up after an hour. It was bad.
Yes. It was a little tricky. I just made sure the top part was open on that clip before prying it out with the screwdriver from the back. Just make sure the little nub is not engaged on the clip so it will slide out. Hope this helps. Best of luck to you.
Looks like I'll be stopping at home depot tomorrow. How about breathability in the wind? Will this have a significant impact on my fences stability in a storm?
No I do not believe it will impact stability at all. The material does have holes which should allow enough breathability. Just not so much as to allow nosy neighbors to peer through lol. I hope this helps. Best of luck to you.
What about a fence that is already up, and you have no access to the backside? Fill with some wood-colored epoxy or something? This on the frontside would not look aesthetically pleasing.
You could maybe take a thin piece of wood trim and tack it up. Honestly this is for if you have problem neighbors and no access to the backside. This is a quick fix to give yourself privacy. Truth be told i'd rather stare at this than some weirdos eyes peering through the cracks lol
Thank you so much. That's just what I need for my fence. I want to keep the dogs from looking at my dog threw the fence. Im hoping it will stop them from barking and jumping on the fence.❤❤❤ Love the idea I'll see if it works for my situation.
You're very welcome. I hope it works for you. Their hearing is very good so it may not make much difference. But hopefully it'll help when they don't see your dog. I know my dogs respond for any noise especially when it comes to other dog's noises. Best of luck to you.
This looks great, but how has it held up? Thanks!
I no longer reside there but I'm sure the new owners are enjoying their extra privacy.
Perfect
definitely
Entonces la presión adecuada depende de la temperatura ambiente?
yes it is based on the current temperature in your area. Si la presion adequada depende de la temperatura ambiente
I legit spit my coffee out when you sprayed your kid 😂
It was pretty funny doing that portion of the video
Thank you for the tutorial. At what mileage did the rear bearings fail? My XB has 131,000 miles and I can hear the rear driver's side bearing growling.
You're welcome. I want to say it was around 160k but we're currently at 320k since changing them. Best of luck to you
Would you say the purple one first or the blue for beginners?
I would say purple if you want a faster ride. If you want it to last a little longer then take the blue one. Have fun out there.
Went here during Christmas holiday…all decorated and live music. So beautiful and views spectacular.
That sounds awesome. I am glad you enjoyed your visit as well. This is a very nice place to visit.
Great idea, man I wish there's a color that can match wood. Just redid a fence with redwood with good the side facing our side. It would look tacky with the black strips. On the good note, just need a few gaps to cover block the neighbors window.
Thank you for watching. best of luck to you
Wow, i had no idea this ship was so large! Thank you for sharing the details. I wonder how many sailors were reqired to maintain and fight? I wish i could see it in person.
Yeah it was very cool to see something so historical. You're very welcome. I looked into this and according to the national park service it's crew consisted of 450 to 500 men. I hope that you get a chance to go see it. Thank you for watching
I'm sure once Mr. King passes we'll be able to tour inside this majestic home, hopefully!
Yeah I believe they would probably open it up for something like that.
I really enjoyed this video. I'd viewed several other ones regarding this mansion but this video tops them all! The video shows in great detail items and scripted boards regarding the person lives inside and outside the home.
I'm glad you enjoyed this video. Thank you for watching and thanks for the comment.
what happens if the neighbour wants to perv at your Mrs and rips it off evetime to have a good look then just tacks it back up for easy access for next time and it looks like rubbish on their side it might magically start falling off the back some how and when you ask them what happen they might say umm i don;t know...take the choice away from anyone else involved and screw pails on your side in to the fence covering the peek holes...trust me i know all about this....we had eyes on us all the time from the old ones next to us, i was bending over one day in my back yard i turned around and caught to eyes steering at my arse through the fence hohohoho spend a little money on recycled fence pails thye are cheap...thats100% proof
That sounds like a horrible situation. I'm sure if you could prove that they did it you can make them pay the cost of having someone replace it after legally pursuing that. Might be time for cameras as I do not think that your situation is over that easy especially if your neighbor is a weirdo. Might want to try the homemade eye spray in your situation lol jk
lol 😂
Goddamn Popeye forearms and s***. I know you've been working on cars your whole life. Thanks for the video got to put some on.
Yeah definitely lol. I'm glad you found this useful. Thanks for watching and the comment. I hope it is a quick and easy project for you.
THANK YOU so much for this!!!!
You're very welcome
I spray painted the staples first, they blend well with the mesh. I am enjoying my privacy. Thanks for the idea!
That's a great idea. You're very welcome. I'm glad this was helpful.
$24 dollars now, fcking inflation is a btch.
Yeah makes it very difficult for us
On my 2011, the 2 abs clips are for a cover, and then once removed, underneath there is a pretty standard push one one side and the other goes up clip. I found it easier to first pop some of those nearby rubber grommets securing the ABS wire and removing the 4 bolts. Then take the bearing part way out to have easy access to the abs clips. It's probably super simple if you have a 2nd set of hands to hold the bearing while you quickly remove the clip cover and then abs plug from the old bearing. Thanks for the video. It helped a lot.
You're very welcome. I am glad this was helpful. Thank you for watching and the advice.
I got the sensor housing off but not the sensor. I stopped before damaging anything. I didn't feel any clips because it's such an awkward location to figure things out.
Understandable better safe than sorry. If possible I would put the car on jack stands to better see what's going on under there. If you look at the video on that portion you can see there is a clip nub on the top and bottom if I remember correctly. For this one I just made sure the top nub was disengaged on the clip and put the flathead screwdriver behind the whole clip then pried it out. Hope this helps. best of luck to you
Excellent. Great detail..
Glad you liked it. Thanks for watching
Thanks for making this video. I never had the desire to go on either of these slides until today. I chickened out once but got back in line for a minute and went on the Corkscrew and then told myself not to think about it. The recommendation from the lifeguard to plug my nose helped. I hate getting my nose full of water. It was so fun. I went twice but the park was closing so I didn’t try Cliffhanger yet.
you're welcome. yeah definitely water up the nose is not too fun lol. Hopefully you get a chance to try the cliffhanger. You gotta try all of em at least once. Glad you had fun :)
How’s your reel holding up after using on saltwater ?
actually the salt wasn't an issue. I always rinse my reels and poles as best as I can so they don't rust up after each use. The real problem is some of the dirty rivers will really break your reel down when that dirt gets in, it messes the gears up.
Dam I wish I did it I don’t want to wait another year😢
Yeah hopefully you get to try them all sooner than later
@@markfoxoutdooradventures9621is it fun?
Lots of fun
FJB? I knew he was responsible for the pier closing 😂
Him and people like him lol sad but true
You’re too funny man, i needed that laugh before bed.
definitely man thanks for watching
Thank you sir, this made it so easy.✌️
you're welcome thanks for watching
I would have stuck it into an alcohol jar
Yeah that would be a good way to preserve it
@@markfoxoutdooradventures9621 yeah
@@markfoxoutdooradventures9621 that’s what I did to a dogfish carcass I bought
Yeah that's really cool. Those barbs on them don't feel to good when they get you. I have some of them that I saved
I love Astoria! As an Oregonian kid in the 70's and 80's living in Troutdale, we went there often and would always climbed the tower. Great memories. Thanks for sharing.
That is awesome. You're welcome thanks for watching
It's been 2 years, how has everyone's webbing held up? I'm concerned about UV rays making the nylon brittle and ending up disintegrating like an old tarp.
I'm waiting for the input on seeing how it has held up for everyone who has used this method.
Honestly I'm sure this has held up well for everyone else as it is mostly still while mounted to the fence. Tarps are just made up of plastic strands. This is nylon and if used in the same manner as a tarp in the sun it would become brittle but this is only used to obstruct view therefore the integrity of the nylon is not compromised.
IDK, but that nylon strap is now 23.00 at H.D. I still bought it and waiting for my neighbors to be gone before I put it up. Also, you could paint the staples black first and they won't be as noticeable
Mines been up about 6 months. Okay so far. I only used a single layer, which was good enough to me. I used a lighter to melt the cut ends so they wouldnt fray.
yes expensive but worth doing for sure. Thank you for the tip on the staples and for watching. Best of luck :)
Thank you so much!
You're welcome!
does the bearing come with the hub? your titel says bearing replacement but clearly yu replaced the entie hub so im curious cause id rather replace mine as well instead of just a bearing
It is actually just one piece. If you were doing the front then you would have to press the bearing in place. For the rear that isn't the case.
Yes. You might be able to replace the bearing somehow, but I think it is pretty standard to replace the whole hub. OEM manufacturer for hub/bearing is like $140. Cheap is like $50.
Is this same for 2008?
yes as long as you have disc brakes on the rear.
Do you run braided or filament?
I like to use braided
Bro!!! New neighbor next door with four dogs 😳 including a pit bull! We of course have a dog as well and the barking is NUTS!! You may have just saved my sanity!! 😊😉 Going to Home Depot now!!! 😊
Yeah I know how that is man lol. Good luck. I hope this works well for you
I pull out my electric blower every time! My neighbor is a creep! I was supposed to have woods behind my house and they decided to build another subdivision with creeps. Especially like yesterday when they started playing a talk show talking about reelecting Joe Biden, and that they need to get Joe Biden re-elected! I also had Metallica blaring. I was mad yesterday!
I know this was 10 months ago. Buy this, I have this pet zoom sonic pet trainer and dogs shut up! It puts out a noise that only dogs can hear that we can’t. They shut up fast!
Sounds like a horrible neighbor. If only you could mute that kind of garbage. The fact they support him proves they are definitely off lol.
That is awesome you don't have to deal with a bunch of barking. That is a good idea
Whats something I could spray at my nosey ass neighbors that might keep them away from watching like creeps
debris from a leaf blower might fix prying eyes lol. I would just kick up a bunch of dust and particles in your yard and if it so happens it unintentionally got on them they may think twice about doing it again
Thanks for the video! This is exactly what i needed to see to add shims on this right rear wheel hub in order to bring my toe to factory spec.
You're welcome. I am glad this helped you.
My neighbor just got a dog that barks at us constantly for just being in the yard. I was about to buy the chain link mesh screen but it's so expensive and doesn't look private. Going to try this method this weekend, thank you so much!
I really hope this works for you so can get some peace and quiet in your yard. You're very welcome. Let me know if it works for you. Good luck
Nice job but u need a net not worth popping your inflaty, what size hoockie jigs were you using? 1/2 oz?
Thanks. Definitely would be horrible to pop the raft. I was using half ounce jigs. Thanks for watching
Went there yesterday and hooked few silvers and chinook sooo fun
That is awesome to hear. Fishing is definitely lots of fun. Best of luck to you fishing. Thanks for watching
Did you use a name brand wheel bearing hub kit or a no name, how did hold up?
I picked these up from O'rielly's. I don't recall the brand. They were the cheapest brand available. I had them price match Autozone's price I believe at about $180 for the pair. They're still going strong. It has been over 3 years and driven many states and many miles maybe around 100,000 miles so far.
@@markfoxoutdooradventures9621 That’s awesome!
Can you do this even though the fence is already up? Thank you in advance..☺️
Yes you can. I explain how to do this towards the end of the video. You're welcome. Thanks for watching
@@markfoxoutdooradventures9621 wouldn't the force of stapling the fabric crack the wood if its already up?
I already did this on a very old fence that was already installed and it stapled very well
I’ve lost fish stepping back lmao I don’t blame him. Had some lady tell me to step back 3 times during pink season, lost 2 fish and on the 3rd time I held my ground, buddy landed it.
That is awesome you got it. Congratulations. 3rd time is the charm. I believe a lot of times it depends on who is working the net whether you catch or not. In this instance I made the decision to pull the king in the net as he was unable to bring it closer. I did not want him to lose it so that is why I did it. I'm glad he was able to get his fish. For a lot of us landing a fish you have been trying for all day is very important.
This video is for the rear I am dealing with the front and I cant get it off it's stuck. I'm on the east coast so we have a lot of rust issues here. not sure how to remove it
You may need to pound it with a sledge hammer to pop it off. I have seen that method used for heavily rusted parts. Good luck
@@markfoxoutdooradventures9621 ill try that
Just let me know if you get it. Good luck. I had to pound off this one with a hammer as well since it was fused on
Hi is there any way that you can put some links to where to purchase all the materials used for making the jigs? Thanks
I would say try shopping at any fishing stores for materials. Prior to the difficult times we are in now they were always difficult to get a hold of. Best of luck to you
Wouldn’t there be mad poisonous snakes down there
I haven't ever seen any down there
@@user-uq9yo4qu7l lol in the desert in middle of city.... You must be from where plants actually grow and things are green