Видео

You may be right with the extendable one but with the pass through you are very wrong about it 😅

Maybe you should drill with a drill bit not a router bit

A rip off!!!! I wish i had watched this video before i bought mine. The features section on back of packaging states that it has an in handle bit storage. The end cap had to be popped off and bits are way too long. Rip off. !!!

good review bud, i like the memes because i basically have the mental age of a 4 year old haha. just ordered a set.. subscribed

Some people here insist it's just simple SH. But no one backs it up with the test like you to show that there is no difference. Until such time, your demonstration clearly indicates that the 30sec cleaner is superior.

Ok so I finally had a job that required a miter saw for molding and so bought the craftsman V20 miter saw. I have an Evolution metal miter saw which I also have wood blades for (love that thing particularly for metal: and I got all the blades for different material types). But this job on one of buildings only needed small molding and I wanted to be able to easily bring the saw there instead of back and forth for numerous small cuts (yes the evolution is mobile, but still requires breakdown and loading in the truck instead of grab, go and throw it in the back seat!). I have a new love! Absolutely love it! It has a marvelous carbide blade with like 40+ teeth (equivalent to a 60 tooth fine cross cut 10” or so). I did wrap my joints with painters tape but in test cuts even without there was absolutely zero tear out! It is sturdy, very ergo-metric, accurate, well balanced and a joy to cut with. It’s very light but not too light, so easy to grab and carry but not so light that you think it’s going to walk on you. One feature I think I really like is that instead of a laser to indicate the cut line, it has a strategically placed LED that casts a shadow if the blade! You can actually see the tooth edges and where they will cut! With this I can land a length to better than 1/64th inch (without a block) reliably every time. Your pencil lead width and eye sight become the limiting factors, not the laser line. Anyhow, I am ecstatic over this saw and can heartily recommend.

Can someone please explain to me why my headlights keep blowing out on 2016 Chevy traverse

Walmart needs to get rid of hart and go back to carrying Stanley black and decker stuff

Similar issue here, I’m pretty good at making sure battery cables are tight, had troubles with that in the past. Me, I got codes from catalytic converter, EGR valve, multiple cylinder misfire only notified at night. I’ve got spark, jumping from the coil pack to the little stud that holds it onto the engine. 🤦‍♂️ and every time it jumps the engine hesitates a little and on a test drive it throws (over 5-10 minutes or so) another random code. I do know that the motor mounts are rubber right left side and the transmission mount on the center front has a bolt through it, but mostly surrounded by and kept quiet by the rubber. I have heard these vehicles have grounding issues. Uncle Mark did a video on a grounding strap which odds are you’re going to need. Even if yours hasn’t failed, it may be corroded and not grounding properly.

Compression locks are great just got the dewalt atomic it's incredible for 9.97 gonna score this one next 😊

Actually, what you were trying to do at 2:45 is how you remove the switch panel. Though you have to remove the small plastic cap that you removed to access the screws. You DO NOT have to remove the door panel! Phew!

did not show how to remove the dust canister!

You have no idea how helpful that just was

Отличное видео, спасибо большое ❤

Cray! Good review.

😂

I know I'm about 5 years behind but so initially there's no filters in there and then by doing this mod it requires two filters to complete and a door correct thank you so much for making this video

how long did fan run for? at what speed ? on a charge

is the dustbin washable? because i washed mine and unfortunately there’s some water build up and i’m scared i washed it when it’s not supposed to be washed

Why would you need 2 T20 bits? I think you mis spoke.

do you still have this mower? I just checked the craftsman website and this mower got mostly bad customer reviews. how is your mower holding up?

the manual says the discharge chute should be on when washing. does it wash better with the mulch plug? that sure worked good in this video. also the manual says after you turn the water off you should run the engine for another 2 minutes to air dry the deck.

They are shorter than the other tool box models they are 17 in wide while others are 20 to 22 in versastak is a bit shorter than the others.

how do i find the mini circular cutter attachment part ? It is really awesome !!

You might try toe nail clippers to trim ty-wraps any excess will act like a sharp razor blade

INSTRUCTIONS !!! What you read to find out what you did wrong. (Love the way you just toss them aside!)

Whay side is the fine side?

4 minutes of my life wasted

The bit holder is for the 1 inch only. No need to put the longer ones in a bit holder.

It's not a fail, ya dunce. It's working as designed. 😂

My front display does not work. Is there a way to turn it on?

I just got one of these. Seems pretty nice so far and it says Lifetime guaranteed as well.

I got 68784 as a retirement present to myself😂. I also got the two side bins and wow am I thankful I did. I would like to find another used......thanks for the video.

La mía no corta nada, se traba y no tiene fuerza al 3 corte ya se acaba la batería es la peor herramienta que he tenido

It's the last flashlight I reach for. Worthless.

Thank you for the great time-saving video. And a word of advice to all: Just buy the basic OEM replacement type bulb. They are 55 Watt Halogen in the 2016, probably same for other years. It is a Type H11 for Low Beams, H7 for the High Beams. There are a ton of different fancy "brighter" bulbs on the market. The brighter they are, the shorter the life of the bulb. The bulb manufacturers even admit this straight up, there are thousands of complaints from people who replace a bulb with a more expensive brighter "high performance" bulb, and it fails in 1-3 months. And they can cost 3-4 times as much! Just spend the $18 for a basic bulb, and it will last longer.

Thanks for the time saving video! So would the Driver Side be basically the same steps?

I have an issue with this unit after few years of use, display is reading EEE, does not operate anymore, any ideas?

Hey man thanks for the review it's been six years and you're the best one who helped us in this box

Can all videos be this perfect. Quick and straight to the point. Thank you

Awesome video! I followed your instructions to a tee and it only took like 10 minutes. Glad I found your video because other videos showed removing the tire and turning a 10 minute job into probably an hour or so. Thank you!

Could probably shave down the edges too and make it flush to the rent of the handle.

I knew it!!!! Just tried to remove this at a Lowe's to check but I couldn't get it to pop out.

It's not that suspicious.. black and decker owns craftsman

so you don't know how to use it?

Wish I had seen this before wasting $20 on the bottle that attaches to the hose, only to have to rush and get my pressure washer to remove it from my siding. I have to say that it is more than bleach. My husband is a pool cleaner and he comes home and the smell is so potent and I didn’t even smell the bleach in the bottle I used today. But it is still not as advertised, I can clean the house with just a pressure washer and get the same results without having to use a brush on it.

Why does everyone show the easy bulb😅

Suena potente que belleza

Great video and thank you! Just got these and was about to turn around and return them when I got to my truck. Quick google search and I found this. Works perfect and took 5 mins

Ty! Now i know i want the tradestack