Видео

You won’t be disappointed. Glad to help and thanks for watching.

You would need a bow press. You have to get the right one that’s narrow enough for those limbs. I have an adapter that that allows me to get these short axle to axle crossbows pressed. You have to be careful how you press those limbs, you can damage them very easily.

That’s awesome. I’ll make a suggestion to use a heavier bolt than the one that comes with that crossbow. And even a 125 broadhead, that helps dissipate some of the power that’s transferred into those limbs. It will last a lot longer that way. $124 is a smokin deal BTW. 👍

@@TrinityWild yes Sir! Already did and 150 grain broadheads actually 👌🏼

@@inthewoods3237good man. Lol.

It may seem like a lot, but it’s really not.

Or an elk.

You got that right. Older styles were shorter and slower. So now with longer travel and so much more power stored in those limbs and cables strings wear out quick.

@@TrinityWild I bought a KI lethal 415. 500 shots no cable or serving wear.

If you mean how often, wax your string every couple of months but lube that rail every 20 shots or so.

All good choices but if you ask which one I would buy it would be the R5X. I just like the way the Ravin operates. I’ve got 3 videos (#4 is coming) on the whole process of unboxing and operating the Ravin. But I’ll be glad to help walk you thru any help you might need. Thanks for watching.

@@TrinityWild thank you!

Thank you so much for the encouragement and thanks for watching.

I couldn’t have said it better myself. Lol. Thanks for watching.

The next time I get in a crossbow that someone has waxed the rail I’ll definitely put it in a video. It will literally cause the serving to melt flat then cut the serving. It may not seem like a big difference but it is.

@@TrinityWild when I got my first Excalibur crossbow in 2007 it came with deck and string wax. I waxed the string. I waxed the rail, never had any flat spots on the string. Flat spots on the string I think would indicate TOO MUCH down pressure of the string on the rail.

@@charlesbeaver5665the difference is, the crossbow you are talking about shoots 300 FPS (maybe) and the string travels about 10 inches. These new ones are shooting up and over 400 FPS and the string is traveling sometimes as far as 16 inches. But you are right that part of the problem is the way this and your crossbow is built the string pushes down on the rail with a lot of pressure. So rail lube or not eventually that string is going to wear out. It’s just the way it is. But that’s why I have a job. lol

@@TrinityWild yes strings in fact, do wear out. However, proper string MAINTENANCE goes a very long way towards string life, along with a QUALITY string to start with.

@@charlesbeaver5665you got that right.

Glad I could help. Thanks for watching.

Thanks for watching. You can get a really good deal on an RX7 right now. I’ve shot one for the last 2 years. I switched to the RX8 because I can now shoot the shorter bow where with the RX7 I had to shoot the Ultra. With my draw length the tangent string angle normally won’t fit me right on the shorter bows. But I’m pretty sure you wouldn’t be disappointed either way.

@@TrinityWild agree! I think I'll be happy with either.

You know, you may be right. I’m going to talk with our gunsmith because this is something I’ve used as an example for years. I certainly don’t want to say something that’s not true. And I’m really not much of a gun guy I’ve spent all my time learning about sticks and strings. lol. Thanks for watching and do appreciate the feedback.

He is 100% correct. Cartridge determines barrel wear. Some Cartridges absolutely eat throats, the term barrel burner is a common term for carts that eat up throats. Between load dev and getting used to the rifle my 26 nosler went about 800 rounds before it started opening up and that is with excellent barrel care. My 28 nosler I expect to go about the same to maybe slightly longer its only at 250rds on it plus the 40 or so load dev rds and everythjng looks great but we will see at around 500 how its looking. My 7saum is on its 3rd barrel from Proof Research it's first two barrels was Hart and both barrels went around 1000 rounds after load dev (100 rounds or so) before it was breaking over the half minute average at 100y. Then you have carts that aren't so hot like just the good ol 260 rem, I have a Hart barrel on mine that is at 1800 rds and it's still a honest to goodness .3 minute rifle at a 100y. Throat wear is starting to show signs but I have no doubt that it will print half minute or better for another 600rds. With good barrels that are good steel the barrel wear is all in the cartridge, I have rechambered barrels that had a ton of rounds on the rifling and they shot fantastic after a rechamber one was a 7mm mag that had like 1400rds on it and rechambered to a 7stw that barrel had 2200rds total on it when it was retired and still would shoot in the .5 minute range consistently that stw really was a Throat eater. The fastest I've ever had a barrel go is in a 7.62 warbird I built and that barrel was done for within 400rds. Was a solid half minute gun for about 300rds and by 400 it was shooting over 1 minute groups at a 100. I've never seen Throat wear occur that quickly in any rifle cal. That lazzaroni Cals was the definition of barrel burners but the speeds was addictive back 15 years ago. Prior to that rifle I didn't believe you could shoot a barrel out in less than 1000rds, I was very mistaken. With with today's super spicy rounds they are barrel burners with the best of them. 28 nosler is gonna be interesting to see how many rounds I get on that barrel. I'm expecting more like 900 but I could be wrong. I've seen a couple people that was complaining that they had groups opening up by 500rds and if that's the case I will not rebarrel it in 28 nosler.

I didn’t say it wasn’t made to be shot. Shoot it all you want. What I’m trying get people to understand is that a crossbow is not for shooting 50 shots a day in the back yard. Get a bow! You can put 5000 shots on a set of strings and it’s still fine. The wear on a set of crossbow strings just won’t allow you to put 500 + shots thru them without being replaced. A new set of strings on this crossbow will run you $150 minimum. And I’m with you, I can buy a HECK of a rifle for 3 grand. Lol. Honestly, I’m with you. I ain’t spending $3500 on a toy I can’t play with as much as I want to.

My pleasure buddy. Glad I could help and thanks for watching.

Well, they all need some maintenance but if you want easy to take care of the Excalibur is tough to beat. Less moving parts to go bad and only one string that’s very easy to replace. Super durable as well.

You will love that C1 Pro, it’s pretty awesome. Thanks for watching.

Those are older videos. The end of last year I got an email from TenPoint that stated this is the “final” word on it. 1. Back wind 1 time 2. Push down the lock button 3. Turn the brake counter clockwise (usually half a turn). That’s the way I had been showing everyone to do it anyway but I didn’t want to put it out on a video and contradict the company. But with the new TRX 515 that the instructions going forward on all the Acuslide models.

I’ve shot a few of those and I really like them. But the fact you can’t use them here during archery season makes them almost impossible to sell. Which one are you shooting at 500+ ? The ones I’ve shot were right at 450 and were super accurate. Maybe I need to do a review on one.

Certainly not a bad idea. Way less that can go wrong. And if anything does go wrong really simple to fix.

You are spot on there. I wish I had mentioned that. A silver sharpie is invaluable in the archery world. 👍

How are you liking it so far?

That’s interesting. I’ve only had them on hand for a few weeks and haven’t seen that as a problem. But I will certainly keep my eye on that. Thanks.

@@TrinityWild I watched a lot of Videos reviewing / commenting on the TRX 515, many of those have comments regarding technical issues with this crossbow. This should not be the case at that price point.

@@flesby I haven't seen many issues as of yet but it's not been out very long. And I do not disagree with you, I still think the engineering has out paced the components. There is just so much tension and power being stored in those limbs and cables it's tough to build components that can handle it. That being said, Tenpoint has awesome customer service so if things do go wrong they always seem very willing to make things right.

You can’t hear it?

I really appreciate the feedback. Thank you for watching.

I still think the flatline 460 is way more accurate.

@@ceciltorres6906honestly I was a little disappointed in the “out of the box” accuracy. The 460 you mentioned is an absolute tack driver. For Xbows that shoot over 500 fps I think the engineering has out paced the components. I’ll know more on this one down the road but as of now, I’d probably agree with you.

@MonkeyTime-kq1bs yes. Speed is very sexy to a lot of people like it was to me, but when I bought the 505, I discovered that speed is not as valuable as people think. More speed is more problem with tuning and durability of equipment, not to mention price of equipment. This is a big discussion that we can go into a rabbit hole but for the most part just know that from 370 to 400 fps and a 450 to 500 grain arrow is plenty of speed for an easy tuning a bit more fun when you get to practice way more n not having to worried on wearing down your strings. I sold my 505. I just now have the 460 .

Well thank you for watching.

I’ve had several people bring them in panicked that they’ve ruined it. I hope this helps.

Maybe you will win it.

I do like the draw cycle on the 7 better. But what makes you say “way better”?

@TrinityWild not a car guy eh

Not really but I do remember the Wankel. Lol

That would definitely help. Lol.

They have always made a good product. 3 years ago I almost quit carrying them because their customer service was so awful. They made 180 degree turn and I’d rate them 9 out of 10 on customer service. Top notch.

Wow!! That is a heck of a deal. I just got the TRX 515 in so hopefully I can get out and do a review video on it this week. How do you like it so far?

@@TrinityWild It's deadly accurate. Especially with the garmin xero scope. The design is well thought out, and the railess system seems to make the bolts fly truer. The reverse draw of the 515 sure zings those bolts out there with a lot of force. One thing I think they should have thought out a little better is how you store the crank handle for the accuracy Maxx. You have to mount in on them top or bottom picatinny rail with holder. If you get it you will see what I mean.

Roger that. I shot one early this year that my rep brought by but I’ve just now got one that I can really go thru. The trigger was sick. I’m excited to see what it will do at distance.

That’s cold blooded. What kind of person steals a man’s cooler? That ain’t right.

I’m glad. Thanks for watching.

That one is #70.

WOW! That sux. I talked to my rep about a week ago and he had no idea what direction they planned on going with those repairs. It may not help but I’d be willing to say EVENTUALLY they will do you right. Their customer service has always been great but this R500 deal has been a debacle.

@@TrinityWild you absolutely got that right. Let’s hope with the price we all paid, something is done and soon.

If I hear anything more I will certainly let you know.

As long as you have the right size field point there should be no problem. Only issue issues I had was getting that broadhead out that I shot from point blank range. Lol. I shoot the Axis 4mm and the new 10x and I haven’t had any problems at all.

Gray and silver? I kind of like that idea. I’ve got to get a crossbow string for a guy and I may do that just to see how I like it.

God is good, all the time. ‼️

My pleasure. Thanks for watching.

Thank you.

That’s what I ended up doing. I ended up going back to the Kuiu color from last year too.