Видео

Well done, Heli Guy.

Glad you love it! Get that prop sorted!

You can fly that bird on a 120amp ESC? I was just reading your setup.

They killed this!! Skee-Phi 🩷💚🖤💛

Had to revisit and see the bruhs in the video! This stroll is still cold! 06!

i built in the motor from INFUSION 180 in this helicopter and all metall upgrades. will be absolutely great..but is enorm much work...

I like the paint scheme on your 3 blade 700. Very nice doesn't look like every other bird out there.

What settings in the ar6335 did you use? I updated mine, and the performance is just horrible. Might just go with the 180cfx firmware and flip the receiver

Hi, thanks for showing output without the smart battery, it's more than enough for me. Could you please tell me, how did you wire the ESC and what receiver you used? Is it ESC straight to channel 1 or do you have to connect anything else?

Awesome job of flying that little beast, I just picked one up today and hope to try it out tomorrow. Looks like a very nice flying field, lots of trees to help protect from the wind.

Do you still work for Horizon?

I miss my goblin 500 and 570. Guh why did I ever sell them. Kick me in the balls for doing so !

Nice flying! Awesome build.

Excellent video. My question is, why did you remove the ferret ring? It's my understanding that it's purpose is to remove electronic noise. By removing the ring noise would be introduced to the receiver which will cause erratic behavior. Just my take...Thanks for the video.

Microheli also has a nice little motor for their 250 size helicopter kit which you can purchase separate. It's 3600kv and has the correct bolt hole spacing and has a 2mm shaft. In fact any of the align 250 motors will also work and their pinions have the same gear mesh of 4 mod. as the 180! 😉

They also sell pinions for a 2.3 mm shaft with the same mod. as stock pinion.

The leopard 3400kv brushless motor is a wicked little beast and it's motor mount holes are in the same position!

Hey bud I have a 180 and still a beginner flyer any tips to getting better at 3d flying or were to start with , I can do flips, rolls etc hover in all orientations still practicing inverted, gyro set up etc would be great nice channel

and the flight?

BEAST!!!!!!+

Great video, thank you! I’m learning to fly helis on a Blade 230 S V2. I want to go bigger but not so big it’s intimidating! Would you recommend the 330S or this 360? Thank you

Nice man. My fusion 180 needs repair. My trio 180 cfx is now my goto basher. Neat flying.

Fusion 180. Top little bird. Nice flying bud.

Awesome little heli. What batteries are you guys using? I use both 200mah and 280mah eflite, but it bogs down when I'm pushing it hard.

Booyah! lol

The 180 looks amazing as a trio!

Nice flying!

and came through

3:05 - 3:20, love the synchronisation. That was so much fun to watch. Thanks for sharing guys. 👍

what camera do you use for this ? thank you

sick

This video makes me wanna try this but that's just insane what you can do with that machine. Great job man!

Moral of the story: read the manual

Thank you very much will ck it again will let you know

You have to put the lipo very far forward this model is very tail heavy I run a thunder power 1800 barely fits I'm stressing out my grommets any ideas

Nice flying!!! What rotor speed are you running?

What battery are you using on your stock fusion 180?

Hi FlyThe Skies! Do you have a video of how you modded this to be 3-blades? I checked the main shaft of the 180 CFX and found it to be different than the 180 Fusion. Does the swash plate from the CFX Trio fit the Fusion 180? Really interested in doing this.

I've crashed all my choppers into the bush in front of my house. Can I do tricks with this one tomorrow? Why is my Dx6i all jittery? Maybe it's not me? Can anyone tell me why it's always windy at my house? Thanks! I've also crashed my Fimi A3 twice, also not my fault.

You really changed this heli. Horizon should really pay attention to this video. I have the stock fus180 and you really have me wanting to upgrade. That motor never bogged down hardly any and it's also pulling that belt. EXCELLENT JOB MY FRIEND.......PLUS I LOVE SEEING MORE OF 'US' IN THE HOBBY!

I got the same receiver on my 330s, I’m trying to use channel 6 for extra servo on a scale application, on my ix 12 I check channel assignments, but it showing channel 6 as pitch. What can I do to use channel 6 witch is an empt port?

Could you share your basic radio set up numbers for the 360 CFX? I just hauled out the one I bought a few years ago but never flew. Back into it now but the heli is acting weird in the tail. Used the rudder set up numbers from the manual. Have a Spectrum 7s. Thanks!

So freaking dope..WOW that looks sharp as hell man.

I miss the old 130 x. Mannn that thing flew great..it was so light and tail held so perfectly once you mechanically fix vibration issue.

Nice review! I had an mCPx BL version 1 and it has the most flight time out of any machine I have ever owned. It was a great training heli for my Trex500 doing casual and sloppy 3D, and was easy and cheap to use in terms of battery, crash damage + repairs, and access to space where I could fly it. That is the real reason to own an mCPX -- the ability to take it to any park with a modest about of space, and operate it safely. Anything 200/250 and up, will be less safe for a casual park setting and turn a few too many heads about what kind of machine is around them and if they should be worried if it's heading in their direction. With that being said, this heli really is as finicky as you said and it's a constant work to tune it or adjust it in some way to get it to fly the way you want it and that just ends up eating so much time and energy. If you are fine investing in this, that's ok. But if your intent is to really use better helis, let this one fly a bit sloppy and don't fall into the trap of trying to make it perfect. Lastly, the SMART features are cool and if you're squarely in Blade heli land, all of their newer stuff will probably integrate nicely with it. However, as an owner of Nano CPX (x2), Nano S2, mCPX BL, and Trex150x who's done a lot of repairs, adjustments, and some mods, the only SMART feature that matters is the ability to trigger a warning on battery voltage instead of relying on a timer. The other data is just "ok cool, I can see this" and you literally do nothing with it because it's not like you're swapping out your ESC for another option, or configuring a governor to manage the load very differently. Most stuff you should be optimizing on these things by sight, hearing, and flight feel then leave it alone unless you're just so in love you need to make one of these things fly perfectly.

Wow I'm definitely getting the 230s motor for my 180 asap

awesome flight! What do you have your gyro set to on TX?

WOW!!! I need this motor in my fusion 180 ASAP!!!

I have done this conversion also. I did it exactly the same and no cutting on frames needed. It 's not hard to do. I am using a 10T pinion. I have about 15-20 flights so far and like he said the motor is very cool. Much more power than stock motor. I am running the stock two blade setup and will be putting a three blade head on soon.