Видео

If you were closer to me You'd be the goto after a vid like this. Thank you.

Your link above doesn't work

niemand anders als dass er verrückt war und eine schlechte Nachahmung von Shemp darstellt

Laughable, the comparison with the pick up truck. That’s what’s wrong with America today. Everyone has to have heated seats, heated steering wheel…. Everyone is over financed and completely irresponsible with their spending. People used to pay cash for everything, live within there means. Now you are talking about tricked out tractors 😅 I guess we need to keep up with the neighbors even with tractors.

Which is more use the 4 in1 or high dump? I need a bucket but can only afford 1. Im a landscaper. Have a small 5.5t truck which need to tip into. Thinking 4 in1 is more uses and can drop dirt over the side by opening the bucket?

The problem with a three point hitch is that it maintains angle between the tractor and the planter (implement). So you guys adjusted that top arm, but as soon as the terrain changes, that upper arm needs to be adjusted again. For instance, if the front wheel of the tractor runs over a clod or a rock, it lifts the front of the tractor. The result is that the press wheel gets pushed into the ground. If the front of the tractor makes a dip, it would elevate the press wheel ..... and you lose your drive system because that wheel isn't in contact with the ground. All of this is a disadvantage for 3 point systems. Ideally, you use 3 point implements that don't touch the ground, like a sprayer.

Bobcat doesn’t have a diesel model lol 😂

Thanks looks super easy to remove can you do a back hoe video I fight the unit take it off and especially putting it back on

I am a new subscriber to your RUclips channel. And I watched your whole video and it was very important for Haybale.

What engine is powering that tractor,sounds super cool

What is that attachment?

Harley Rake?

Insuring a Tractor is a scam. You already on the hook to pay the loan if you default, buying insurance is a way to subject you to legalized extortion, all insurance that is "required" is legalized extortion. The only way this stops is stop buying items that require insurance. They pray on the poor and middle class, rich people do not pay insurance, they put money in an acct and make interest for it, as long as they can show theres money in an acct that covers the cost of whats required they dont pay....but YOU do.

Is 819 at 24in on the fork, full extension, full height? If so what’s the comfortable work load? Thanks.

Very well done

I have an NS6010 with fully loaded tires and lifting a 2000 pallet lifted my rear wheels off the ground. How much ballast was on the back?

I don't like how floppy that hood is when its raised, looks like weak hinges on back side of it

nice

🤮🤮🤮 I hate Echo, but I would take that over Ego 🤮🤮🤮

That was perfect

I don't see any brush. You look up the word brush and you will find the word scrub vegetation. Then look up scrub vegetation and you will find what real brush actually is. That ain't brush. In fact, you actually bypassed the real brush and didn't cut it. That rotary cutter/brush hog is completely out of adjustment. How could I tell? The key was you were dragging all kinds of crap in the front corner of the hog but what iced it was at about 12:26 to 40 and beyond watch the brush hog tail wheel. Notice how its wobbly and going all over the place. That's a dead give away that there isn't enough weight on the tail wheel of the brush hog. The upper link is too tight for sure but the brush hog rear height may be out of adjustment too once you get the front up. If you tell me all that is adjusted exactly right and is a characteristic of that brush hog, I wouldn't own it. It absolutely shouldn't do that in a little bit of wet grass but you did the video in the wet to promote the flail mower over the brush hog anyway. Of course it would have been better for the mower if the grass was dryer but it still should not do what it did. I personally do not want the rear of my brush hog to be 4-5 inches higher than the front. That's wrong. You'll get a much better cut down around 2 inches higher. I'm 65 and I've been sitting in front a brush hog and sickle mower since before I could legally drive a car on the highway. Been there done that. I love watching salesmen try to be tricky dicky.

Just like mine ❤

I bought a Covington one row. Works good in my stoney soil.

Probably need something other than a lawn mower to run it

Looks like junk to me..

Could do without al the dam music

Just like Kubota, another Bobcat built mower.

Skip to 10:58 to miss the endless gab.

Both videos have 760i title.

OMG!! The insanity of it all….. 😂😂😂. Well that’s 23 min and 4 seconds of my life that I will never get back……….

Any chance we could get a video on leveling the deck? I can tell you it ain't easy.

I've heard that this can be installed on a rx7320

I need one… I’ll be the sales rep if I can have one for free

Awesome video with some great shots on the comparison of the two implements. There were many variables as you mentioned out in that field on the performance of both. However, in my opinion height of cut is one variable that was overlooked and not mentioned. Clearly the height of cut on the flail was set much lower to the ground than the rotary cutter.

I would get one if they had a mid mount mower still

Super 👍💪

Sounds like a jet engine.

I'm looking to get a tractor but have barely any credit. Is it possible to get financing with 50% down and no credit history

Nice. Thanks. Engineering with maintenance for the end-user in mind. - CK2620 -

I purchased a Kioti w cab which is fantastic and went through DLL to finance. Simple process but their website is absolutely pathetic!

The advantage of a gear drive Tractor is reliable consistent ground speed. This blends well with application of broadcasting fertilizers, seedling and even herbicides. If A given setting on a pto driven herbicide spray applicator applies X gallons of spray per hour and the crop requirements are Y per linear distance of Z then the ground speed of W must be consistently controlled to deliver the required amount. There's lots of mathematical charts and tables published by the manufacturers of the equipment and also the USDA. Nowadays the GPS and computer controls do all of the work for the Farmer.

Nicely done!

What is the top speed in low gear? I see high is listed at 10.7 mph

I really appreciate these videos guys. Thank you!

Great advice

where can I buy this bucket? Link? for a 755i

You should have shown it running to get an idea of how loud it operates

what 4-in-1 bucket is this? Who makes it?

Thank You

I have one and didn’t know this was possible!