Видео

Sewms like the biggest problem was the compressor rods hitting the top. Harbor freight has spring compressor for 39$. May get one and just cut the length down some. Should be good.

Was going to throw out my blower but this really came in clutch

Thank you!!! 👍👍👍👍

👍👍👍

Hello there,my w220 blows super hot when i select temperature after 17-18 on display and to have cold i must select LO!!no way to have middle temperature in the car…any ideas?thanks

after seeing this video I repaired the thermistor in my 04' S500 after years of paying for diagnostics and it never actually being fixed. upon removing the housing it was visually apparent and an obvious blockage of dust and debris on what remained of the temp sensor. the repair was simple, part was stupid cheap, and the proper operation of the W220 climate controls are absolutely dependent upon this one component. with 250,000 miles on the car, this was by far, the least expensive major repair. endless gratitude, thank you for posting the video.

Thank you very much!

Dreams like some preventative maintenance is to spray some electrical cleaner into that port once a year to remove dirt

Thank you. I have the same issue exactly. I checked the part, exactly as you did(without Breaking the clips 😏). And yes, one wire was broken. I'm going to fix this at the shop tomorrow or whenever I get back there. Thank you so much.

I had the same issue but my sensor(thermistor) was so bad that I couldn’t solder anything to it and honestly wouldn’t want. So after googling I’ve found that you can buy thermistor and replace it with the existing one that’s bad. Just search on ebay for “ NTC Thermistor temperature sensor bead 10k 1% 3950 “ make sure it has all these spec in order to work correctly Thanks for video!

Cabin temperature sensor since I have 4 zone u should have 2 or 4 I don't remember their location but this is your problem it can't detect cabin temperature to adjust to anything other than full hot or cold find and replace these sensors

Thank You. I had got quoted $500 to troubleshoot by mechanic. Never would have known if not for your video. Fixed mine in 2 hours.

Ностальгия)

Rear seeal

Makes the truck look so much better

thanks brother i just fixed mine worked like a charm saved $460. idk why mercedes got so cheap why couldnt they do a thick wiring or something like we just did, i know so they can charge us $460 but tnx to your help i fixed mine now it blows cold air on 72 thank you.

I’m doing this now and the temp sensor is crumbling. May have to look for another sensor later.

What did you do with the excess brake fluid. Did u pour it back in

Thanks for the video. I just did my 18 raptor this weekend, passenger side was easy, driver side not so much. I used a 2x4 across the engine bay from the hood bracket to the front just over the radiator to use the ratchet strap to hold the spring from sliding down. There was just too many wiring sensors in the way. I didn't want to damage any of them. I also took of the air box to pass the the strap through directly over the spring. A little more work but I didn't damage any wiring or sensors. I also used the shankly spring compressors along with 1 regular compressor that I rented at auto zone to be safe. Worked out perfectly

Hairy as shit! Big balls

Subscribe my RUclips channel multy car information and modify raping full

How’s the truck holding up? What’s the mileage right now? And how’s the reliability? I’m planning to buy the 2019 and keep hearing about transmission issues camphaser issues, truck catching fire etc.

RomkaTheMan - Very well done. $360 is what I paid in 2011 to replace the Overhead Control Panel on my W220, and I was happy doing that. I read about the MB dealership repair quote: ~$1800.

Good job

I commend you for trying something new and thinking outside of the box but I wouldn’t have done it. I have a 18’ Raptor and a GTR. I won’t cut corners on my expensive vehicles. It would have sucked if something broke or the compressors popped off and damaged your $70+k truck..... Glad it worked out for you though!!

Thank you for all hard work. Thank you, all the best from Florida

Awesome info. I need description of the capacitor between these two wires, would you please?

What size collar did you use?

Thank you very much for this video. My AC went out last night and I noticed it was cold only on Low setting. I found this tutorial and removed the circuit board as described and found one of the wires broken exactly like shown in your video. I didn’t replace them as shown in the video, I soldered it where it was broken and reassembled and it works perfectly. It now reads the interior temperature. When I press the RES button for 5 seconds and scroll up to NR 01 the interior temperature is displayed, before I repaired it indicated zero degrees. The entire repair was 20 minutes, thanks again for sharing. Without this video I was going to the dealer to repair.

I pulled down the console above the rearview mirror. fixed the sensor. But now there is no power to that console AT ALL. NOTHING WORKS. Checked all the fuses and all fuses are good. What did I miss and what went wrong? Did I burn the whole board? Thanks for your help.

wonderful video. I HATE those little fans. had a Volvo that the little fan was making SOOOOO much noice. NOw the same little fan makes some noise in my Mercedes. Now I am gonna use a can of air to blow the dust off without opening it. Hope it would stop the noise.

Thank you!!!

I have a 200 S430 and all of a sudden the blower did not come on anymore. for 2-3 days then all of a suuden it came on then no more and then on one more time.

Did you see a change in performance? I just had my icon leveling kit installed 1.75 inch lift... I feel like I lost power and have a lag when I step on the gas ... any thoughts?

Is it available for the gen 1 ?

Great work

Did you unplug the battery before doing this? I bought a brand new unit at the dealer because I didn't want to run the risk of it buzzing later on but don't know if I need to kill the batt first. Thanks!

So tremendously helpful. This video is very well done.

thanks for the video! i noticed there's quite a bit of rust - just wondering, where in the country do you live and how long have you had the car when you filmed the video?

What's the oem size of the rotors that came on this truck

Great video. Thanks, saved me lots of testing and searching time. Easy fix (when you are good with circuit board level soldering).

hey I followed your video and did find same sensor wires are broken, how ever mine is broken by the sensor and sodering is not an option. do you know if you can replace the whole thing or the sensor it self? Thanks

Thank for your time making the video.

I just fixed my S430 Thank you so very much!

Good job thanks

Where was your jack point at the front of the vehicle? Great Video! Thanks

this is a great video. thanks for making and sharing.

thanks excellent thanks bro but i have some problem with my 2001 s500L right side duct blowing cold air and driver side duct blowing hot air and same thing happing with the rear ac plz help me.

I never comment on these, but this was fantastically helpful and allowed me to do the repair, start to finish, in 20 minutes. the break in my wire looked exactly like the one in your video. Thank you for taking the time to put this video.

Major thumbs UP!!!