Видео

I’m not sure what it’s called exactly but it comes with the Behind-the-head hearing protection from Peltor and Safariland.

Take note on how you are racking the slide, most people try to pull back with just their support hand which is difficult. What I like to do is push outward with the hand gripping the pistol while my other hand is gripping slide and only slightly pulling back. Something like 75% push with dominant hand and 25% pinch & pull with your support hand. If you struggle with that, make sure you are doing this relatively close to your body, the further your arms are extended out the more difficult it becomes. I have helped many people with this and it seems to do the trick. I hope my explanation was good enough and maybe I’ll do a quick little video in the future on the subject. P.s. I’m also a big fan of Vickers Tactical Slide Racker it is awesome and makes racking your pistol much easier.

Thank you! I appreciate it!

It says “Reduce Recoil” as in felt recoil not weight. On the back of the package it states “same factory weight spring.” I agree with staying stock, I’ve never had an issue with OEM.

I haven’t had any issues with mine so far but I’ll definitely keep an eye out.

I just went back to the OEM recoil spring and guiderod, haven’t had any issues.

I was thinking of trying one, I just need to find someone that makes them for the little G42.

Honestly, the weight difference is negligible and adds little benefit. Over-priced “snake-oil” if you ask me.

I run lots of different ammo through my G42. I really like Freedom Munitions for your basic range ammo and then for specialty self-defense I run whatever high quality hollow-points I can find but I prefer Speer Gold Dot.

@@ShortStackSurvival I asked because mine will not feed any hollow points consistently. Hornady critical defense so far will run flawlessly and ball ammo. Anything else,se is a crap shoot 😩

@@ShortStackSurvival I just read my question and Cuddos to you for translating lol

@@ROOSTER-ql5fs That sucks, I’ve had pistols with feeding issues before and I polished the feed ramp with Flitz and a soft dremmel, works flawlessly now. I think sometimes there are tiny imperfections that can catch the tip of a bullet, especially hollow-points. If that doesn’t work, take a look at your magazine, could be a follower or spring issue. And if that doesn’t cut it, sometimes pistols just don’t like certain specialty ammo, I’d go with what it likes and buy a bunch of it so you don’t run out! I’ve had good luck with Hornady and Federal HST, but I can’t say I’ve shot more than a magazine or so worth of each due to the expense.

You’re welcome! And yes I do still use it and love it, definitely one of my favorite upgrades. I bought another one to try on larger frames Glocks but haven’t gotten around to installing it yet. They are pretty affordable, so I say give it a try and if you don’t like it, you can go back to OEM.

@@ShortStackSurvival thank you so much for the reply and information.

Omg that’s awesome! Thanks for subscribing, I’m super excited to have you!

Thank you! I really want to get a Gallow Tech cabinet in the future, they look badass and USA made is my jam. I will say the SecureIt safe has been holding up well for me, but every time I look at it I think C-H-I-N-A and get annoyed lol.

Because the Glock store stated it was a simple upgrade that was same as factory springs weight, no mention of other modifications needed. Just drop in and go.

lol! Thanks haha!

You’re welcome!!

Yes, I know. Specifically for the G42, It is sold as a captured spring/Rod package (only one spring weight option) and states same as factory spring weight. Just wanted people to be aware that this claim is obviously untrue and that there are potential consequences when deviating from OEM.

Awesome! I’m glad I could help!

It was super uncomfortable for me and I did not feel as if it concealed any better with it on. That being said, everyone is different so maybe others would love it.

Gallowtech does offer cabinets, although their website leaves something to be desired and can be difficult to navigate. If I were to do it all again, I would buy either of these cabinets : www.gallowtech.com/wcab-74-26-15-1.aspx www.gallowtech.com/ultimate-weapon-cabinet-package-3.aspx

@@ShortStackSurvival I can dig it. I've got an Answer 12 already which has been great thus far. I need a separate room for my goals girl! :D

@@chris4883-e9f Omg me too! I would love to have a dedicated gun room and have some of my favorites displayed. Alas, for now my safes do the trick.

@@ShortStackSurvival I'm not big on gun walls either unless they are secure too. <Sigh>, someday.

@@chris4883-e9f I agree, behind a locked door is a must. I think the heavy vault doors are a bit overkill for me, but I’d have a quality lock on it for sure.

Have you had non-stainless steel items go bad?

You’re welcome. I definitely think your money is best spent elsewhere, like ammo or a training course. I bet if we did a blind test most would not notice as huge a difference as they think they do. My guess is after spending well over $100 people want to believe it gives them an incredible benefit. I know my video has been controversial and even unpopular to some, but I’m just sharing my experience. It’s as if these “upgrades” are a religion and to state otherwise is ballistic blasphemy.

Thank you! I will say I have heard with the larger pistols you can get various spring weights that will accommodate the ammo you shoot and potentially have no issues. When you modify your pistol from stock, it isn’t always for the better or can have some unintended consequences. That being said, you can try it for your pistol but just keep an eye out for the problems that I’ve had. I enjoy shooting stock pistols but sometimes you are just itching to switch it up, I totally get it. Whatever you choose to do, just know when you’re rolling with a 40 SW it makes the 9mm boys jealous.

@@ShortStackSurvival I just hate modifying unless it’s 100%, I’m sure you agree. Stock Glocks have always just worked for me. Only a limp wrist could maybe jam up a Glock. Besides that it’s 100%. All these other companies just suck compared to Glock in my eyes. Glocks are simple, robust, and reliable. Grip angel is the only downer, but I got use to it very quickly lol

Glocks are very reliable, I love them. They are one of the best pistols out there, second only to the S&W M&P in my humble opinion. I think most people would benefit from buying ammo and shooting more rather than buying expensive upgrades that potentially impact dependability.

OMG! That’s a Brilliant idea! Thank you!

You’re welcome! This is just my experience with it, but I have gotten just as many people saying they had the same issue as the ones who said it worked flawlessly for them. I think OEM is the way to go.

Sounds like some people have tricks to make it work properly, but I just don’t think it’s worth it. Did you go back to OEM with no issues?

lol!

Thank you! I understand where you are coming from, you gotta make purchases that make sense for you. All I want is for companies to be upfront about where their stuff is made, and not try and hide behind “American Based Company.”

Thank you!

Lmao!!!🤣

It has worked very well for me thus far.

Yeah it really does suck. I would recommend checking out Gallowtech, they have some cabinets that are similar and made in USA.

@@ShortStackSurvival Thanks you Rock ! Good content though !

@@danielharper3250 Thank you!

Yep, I did a full length video showing that it was the spring weight. Glock store only sells one assembly for the G42 and they claimed it was same as factory spring weight. I just wanted people to know that the spring weight is in fact not the same as factory and they should consider that if purchasing.

lol! If only I could.

You’re welcome! And yes if I can do it with extreme difficulty, just about anyone can!

They are pretty good, especially for the money. I also like the DeSantis Superfly pocket holster it works great and I’ve been using it for almost 4 years now with my bodyguard with no issues.

G42 is one of my favorite little pistols they work very well and don’t feel like you have a 5lbs brick in your pants. Love all the upgrades you’ve done! I bought a few ETS magazines and they seem to be doing just fine but I don’t have a ton of rounds on them yet.

It’s a gen 5 man lol

Ok awesome! This was with the Glock store brand recoil spring and guide-rod? I definitely want to get my new G42 out and try it again.

Yes. GLOCK store tungsten rod recoil assembly

@@rickgarlington114 ok thanks! I really appreciate the information!

Yes, let me know if you notice anything! I didn’t realize it was happening until I reviewed the video footage. I’ve heard that their recoil springs and guiderod work well in full size G19, G17 etc. So this may be a G42 specific issue.

Thanks! That’s good to know. I actually picked up another G42 and it is stock so I can definitely test the theory and see if there were any issues due to the slide racker. I personally haven’t had any issues with the OEM recoil spring and guiderod but it’s worth testing the theory.

During filming at the range, the G42 was actually having the same issue. I did not notice until I reviewed the footage. After sending the videos to a gunsmith and talking to other avid shooters, we all agreed that this was absolutely a design flaw and potentially dangerous condition which is why I wanted to share my experience with others. Everyone is free to use or disregard the information as they see fit. It is important to me to be very up-front with my viewers and not withhold information especially if might be unpopular. As long as people are aware and can make an educated decision or at least keep an eye on it when they begin modifying their pistols then I would say mission accomplished. Thank you for taking the time to reply and share your concerns.

This issue does not happen with the original spring and guide-rod, but I suppose you never know. I did buy another G42 recently but haven’t tried this guiderod with it yet but I would venture to say it would have the same results considering that the spring weight is lighter than OEM. There is a lot of feedback from this video so I was thinking of doing a follow up video to address the many questions that people have regarding this issue.

Haha well not all of us are so gifted. I love tinkering with guns and gear but I definitely ride the struggle bus from time to time.

@@ShortStackSurvival I also will say, I've done it to 43x and 19, and that's when the struggle was real, lol 😂

@@snip_king428 I’m in good company then! Someone suggested to squeeze the magazine on the sides next time and then the baseplate will come out easier. Lessons learned for next time.

Thank you, I really appreciate it! I wonder what caliber they would use to get it smaller? Maybe a 25 ACP?

Thank you! I really appreciate it!

I definitely think you’re onto something here. I usually keep my pistols close to stock, but I’ve heard so many good things about “upgrading” all these components so I figured I’d give it a try. Honestly, I think the average person should keep it as close to OEM as possible.

lol!

You’re welcome! Thanks for watching.

Need some coffee? Or a nice hot cup of STF-up?

They are LA Police Gear Terrain Flex. They are awesome, affordable and have the extra pockets that come in super handy.