Видео

do not understand i know why i do what i do i can answer you ?

Great review! It is clear that Rhino is listening to your feedback and incorporating improvements. I thoroughly enjoy playing with my Rhino. Thanks for the review.

you chalk ever time

I absolutely loved your review. Fantastic work my friend. 😊

A higher percentage of times but especially with radial type pins or the Mezz wavy in particular , or even a metal joint that squeaks or is tight in general but not always you should take a fresh paper towel ,fold it 4 times and wet it with rubbing alcohol. Then I place it in a dry paper towel and squeeze it. Then i wash my hands in cold water and dry them on another ptowel and keep that to keep hands from drying and cracking.the skin. then i take the moistened ptowel w rub alcohol and use all 8 sides by twisting the clean corners and cleaning the threads real good. Alot of times black stuff will come out. From there I'll manuever the edges and sides by folding the ptowel over to keep clean sides and retwist the ptowel to continue as many times as it takes until the bore threads are clean and sterile. Then I 'll take a fresh side of ptowel and clean the pin real good. Always switching sides to not rub the dirt back in. Then in many but not all cases depending on circumstances, I might break out some carnuba cue wax . I use chem pack with the brown lid. And rub some on the pin threads . Keep fresh ptowel w rub alcohol ready to clean edges of cue and shaft handy! Then twist slowly on the mezz pin or any wood to wood pin that is too tight. Unless the pin is a mini radial. Then you might want it to be tighter because the threads are too short possibly. The mezz wavy pin was too tight. The newer wavy 2 pin is slightly thinner and the shaft threads are phenolic on this later itineration. The original wavy the threads were tighter than a young european girl in the 80s in franfurt. So you twist the shaft down until it catches sometimes. Then stop and back the shaft out a little. Don't force it! If it keeps catching back the pin off and apply a little at a time of carnuba ,then keep rethreading it. After a bit of that where you have to apply carnuba the threads will loosen up to however tight or loose you want. But if it's too loose your shaft can come loose easier. you just want to leave a thin invisible film of carnuba round to coat the pin and shaft threads. then i take a jewelers screwdriver and gently ever so lightly clean any remaining carnuba out of the bore hole and pin areas like the top of the pin with no threads and bore hole on shaft using rub alcohol with fresh ptowel sides. So as not to rub dirt or carnuba back in or over the surfaces. I clean the bore hole real good and even dip the rub alc into the hole edges to sterilize and clean all surfaces around the joints. Most guys don't understand that they need to clean the joint sections of their cue. You'll either develop the knowledge or make tons of mistakes and maybe never learn things. We all have to be told everything we learn minus a little we might engineer at various rates of time in the learning process.

I think they need to offer different shaft diameters as well.

Speaking of synthetic tips,you really need to be trying the new bulletproof recoil synthetic playing tip.I absolutely love mine,and I’ve installed a few of them now,and everyone seems to really like them.

Great and informative video as always. Good job my friend. Do you prefere the Rhino cue over your JFlowers Dante? The radial pin gives you a better feedback in the butt of your cue, because of the large pin size in combination with the tight fitting. Even my Mezz with a tight united joint, does not transfer the feedback as good as a wavy or radial pin. THX and best wishes. Thomas

The mezz united and wavy joints are the "bees knees". I've had a mezz cue with the united joint for 20 years and it fits the same as when I bought it.

Could you do a review of the new bulletproof recoil tip? It's a synthetic playing tip.

This video was great. Coming back to pool after being away for a while. Always loved big 3/8 x 10 joints and a good stiff hit. Looks like they are not as popular these days. I found my favorite player has quite a wobble in it now. Always had weakness for buying cues. Considered a Predator Aspire (looks, price point, LD shaft, brand power?) but the small radial pin makes me nervous as well as the fact that Predator doesn't use it in any other cue. Saw the Rhino advert on FB. I was like wow price is great. Looks nice (I love wrapless cues). I don't care much about traditional materials (had cuetec back in the day, but the sticky shaft turned out to be a no go). Anyway, rambling post. Thanks for the great review. The Rhino may be right for me.

Loved the review! Went ahead and ordered their cue. Definitely glad to hear these great results! 🎱

Great video and I agree on joint tightness. Have a Huebler I picked up in the mid 70's that had the white joint collars that would crack if you broke with them. Never broke with mine! Local cue maker mentioned that the joint material on those cues was from old cue balls!

Great review! Enjoy your content 👍

I currently shoot with the Rhino 12.8 connected to a Konllen (Jflowers) butt. I do not like the Rhino Nebula butt. It's bumpy, unattractive, and slightly more butt heavy. I don't know about the Retro and perhaps the Retro resolves all those issues. The Rhino shaft is very good and I choose it over my Cynergy. However, I just shot with my Cynergy the other day and there are things I miss about that stick. Conclusion: There is no perfect stick.

Winner winner chicken dinner. :-)

Recently bought the Rhino Retro Pale Moon Ebony Wrapless. The shaft sounds hollow - its seems as though it hasn't been filled with foam. Is this normal for Rhino shafts? Has anyone had a similar issue?

Why a 9/10 ball rack with 8ball?!?? Your a real rocket surgeon

Looking to purchase the rhino retro cue. Hoping to see a review video on the cue! Definitely looking forward to checking out a review on their newer cues. Definitely got a new subscriber. Enjoyed the video!

Not everyone arrives to the party at the same time. I've been playing with longer cues for over 20 years. In fact one gentleman challenged weather I could use a longer cue or not..............he lost. My main cue is 61 inches. My experience is a players height has nothing to do with it. Standard was 58 inches many cues came in at 56 & 57 inches. Today it's literally whatever works for you. The weight can be adjusted to exactly what s smaller cue is. I recommend using a custom cue maker. Peace.

You potted the 8 before all the other solids, you lost the rack bud.

Isn't it the guy from old series of impractical jokers. Or is it just me imagining it

Who's had the opportunity to play with the new Retro Cues from Rhino? What do you think of the 'Time Crystal' tip that comes with those Cues?

too long!! cramp that up to 15 minutes vid

Did you catch the Kansas city open?

Nice shooting, bro. 😊

Nice shot. :-)

I think playing with a hard break tip really gets your break focused and dialed in. Less effort into powering the ball and more concentration into the hit can have powerful results. I'd like to try that cue!

I bought my buddy a rhino break stick and it's great cue. I really like it, it's really great for the money and feels good. Freaking the but is odd but works for breaking.

How do you like the Cadien tip on the SMO?

Ever tried the new crown shaft? If yes, what do you think of it in terms of feel and deflection?

On my playing cue I have a standard lucasi low deflection shaft wondering if it would be worth it as an upgrade?

I'm getting more and more comfortable with the Rhino Billiards Komet Breaker With the Bulletproof Tip. At first I found it really hard to control the cue ball off the break. It's getting better. My playing cue is the Dante 2 with the SMO carbon fiber shaft from JFlowers. jflowerscues.com/ref/HereAfter_Billiards/

How does it compare to JFlowers cue?

Well they come with 30inch shaft now :))))

At 17.33 I didn't hear a word...

Good billiards. But also makes me want to watch Bloodsport again. Damn good movie.

Pause it at 11:17. What're you doin there bud? Lol jk jk

Thank You very Much for your Time & Lessons 🪄🎱🫡

I Subscribed Your are What i Call a Wise Teacher🫡✊🏿🙌🏿 🪄🎱

Be advised. I ordered a cue from their website. I believe it came from Florida. I won't say the name of the seller. I received a totally different cue and they wouldn't do anything to help. So I went and bought a Whyte's Raw Carbon fiber shaft. I have 4 different joints for it that allow me to use on 4 different cue brands(joints). It is worth every penny and makes my previous Jflowers Cue pretty much useless. And I really like it. Never again with Jflowers.

Hey brother, I subbed probably 6 months ago or so. Love your content! Went back to watch some of your 3+ year old vids. Can't waith to watch a few of these on the practice table. Thank you.

Still remember your stun run-through tutorial... that is usually the first shot I go to warming up on a new table or in a new place.you got a good center ball, my dude!

how i wish ican have that caiden cue tip😂😂

Using the closest known diamond bank line( 10-5 in this case ) tip of inside English

I'm curious. What's the answer? There's nothing in comments.

I guessed right, because I guessed the end of the pattern correctly, nice game

Rhino Unboxing : ruclips.net/video/uAMKr1mhg_w/видео.html Rhino Review : ruclips.net/video/AXYtYt9Ntxo/видео.html

The reason you have to draw the ball on more distant shots is because the ball has lost its spin off the tangent and has started to roll more forward.

Nobody:... Pocket: "Hawk Tuah" 🤣