Видео

@@williamtarr9758 that’s awesome!

@diznylnd it wasn't to bad took me and hour or 2 to do both tails now have the smaller ones to do tomorrow

@@williamtarr9758 yes! 👍

@@lucidfk7 I didn’t change the reverse bulbs. 😉

@@maxortega1890 I don’t sorry. You can find them on eBay and Amazon.

@@diznylnd yea haha im tryna find them and I can’t I like your civic! I have a blacked out one and I’m rocking a casale duckbill but I’m just tryna clear clear the tails

if you still needed them

@@lucidfk7yea still looking for em do you have a link?

@@howa08 hello 👋. No extra noise that we have ever noticed and we long haul the truck from CA to AZ twice a month in summer. We also have a sunroof so don’t know if that would make ours a bit more noisy than a slick roof. We haven’t noticed any change. Hope that helps.

@@ducebigalow8834 you have to have the power and ground connected. You can decide if you also want it to be a turn signal but you must also tap that wire. Hope that makes sense.

@diznylnd hi thanks for replying. I was trying the turn signal first but did not connect the ground to anything. I'm guessing I need to connect the ground as well. I wanted to ensure it all worked prior to remove the rear garnish and fish the wires up.

Do you have to disconnect the battery.

@@gaziali6125 hello 👋. I don’t have the part # but you can look up Honda Access led dome light and find it!

Found it but mine didn’t come with a ground wire. Any idea where I can get the ground wire?

If you watched the video you would know lol. It shows the whole process of how to make them! :>)

@@fastlane2914 thank you!!! I appreciate it!

@@diznylnd👌👌 one question though, is there no way you can remove the air guides for reinstall, rather than cutting them off? Incase you want to go back to oem

Very nice! Thanks for watching the video and the comment!

Thanks 🙏

I didn’t say anyone else needed to use this oil, It’s what I choose to use. Thanks for commenting your opinion though. 👍

Hi 👋. I don’t recall disconnecting a washer fluid line, so I guess it would still put fluid out. I’ve never used the rear wiper so I don’t have a definitive answer. Hope that kind of helps. 😉

@@diznylndHey! Super late response haha. I'm just about to install this lol. Were there any issues if you took the car to a car wash? Hopefully not...

I don’t have the seat anymore. Sorry

Yay for new car parts! Good luck with the install!! Just give yourself ample time so you don’t feel rushed 😊. Have a good weekend.

@@diznylnd did you flash a tune right away for the intercooler? I have a flash pro and I plan a n uploading a phearable tune just not sure if I’ll be able to get it all done the same day ?

Thank you!

You’re welcome! Thanks for the support!!!

Thank you 😊

Definitely very time consuming! Good luck on the project if you decide to do it! Thanks for the view and the comment! 😊

Haha. I don’t ever want to do them again, so much tedious work! Definitely worth it though! Good luck on yours if you do decide to go forward with it ! Thanks for the kind comment, I appreciate the support 😊

Yes. It comes with the OEM set in the packaging

Thanks ! Hope it goes well!

but to remove the console and install the seat

As long as the seats didn’t have arm rests attached it should in theory work just the same!

Omg lol. 🤷🏻‍♀️

Of course!!! Glad it is helping people out. I just did it again with and 2004 Expy and fitted in the Navigator console removing the jump seat. Turned out great!

@@diznylnd nice!! I saw a video where you changed the license plate lights to led on the white Navigator. What size bulb and brand did you use?

Thank you so much. I appreciate it!

Thank you 😊. I really appreciate the feedback and support.

Thank you 😊. I really appreciate the feedback and support!

Thank you 😊. I put them up on the screen in the video so you could look up the tools I used all purchased on Amazon!

Hello 👋. I love it. I just did my second oil change with it at 6000 miles on the car! Honda OEM filter again!

@@diznylnd So now you have v300 power in the engine And you will put 8100 power next? Am i say right?

Hi 👋. I purchased it on eBay ! Thanks for watching.

Thank you so much for the kind words! We love the clearance lights! The OEM set is perfect! Good luck with the installation.

Hi 👋. Thank you for the kind words I really appreciate it!!! 😊

Hi! Yes you can pull it from the outside, I just didn’t want to risk marking my paint 😉

I was looking at the bumper from inside to see if I can remove the panel tabs from inside. Actually for the Si model, we have mufflers sitting on both sides blocking some access. For your Type R, you have that shield that you removed first. Will figure something out 😅

No, I don’t have the seat anymore. Sorry

Hello, it’s just a soft cover I ordered on Amazon!

@@diznylnd Awesome! thank you, and I’ve ordered the Access dome light 👍😃

I bought a second set so that if I messed up it wasn’t my set on the car.

Hello 👋. Mine has been modified to be red so it matches the interior of the car! Someone on the Honda civic x gen forum modified them!

Thank you!!! 😊

If you keep all your parts I would assume you could just try and pop the delete piece back out and then re install the motor and wiper arm etc. no damage is done to the car or parts from removing them. At least not in my case. Hope that helps.

Thank you. I am new to the track day game, and just got a new-to-me '21 CTR. For me, mods are prolly a year or two away. In what order would you do what mods to improve what is already the world's fastest front wheel drive production car?

It sounds like your describing the screws possibly being stripped. You’d have to pull out the light and then see are they just stripped in the housing or the actual trunk lid. Hope that helps

@@diznylnd thank you for sucu prompt response. The lid it self has one screw that it is loose however the lid is firmly attached so I can't get the screws out neither the entire housing lid it self ☹️

Hi 👋. Mine didn’t have blind spot assist, not sure if Canadian or European markets did…

Hi 👋. If you are talking about the little clear tube part I plastic welded the top and bottom to the lights shell. Hope that makes sense!