Видео

I heard this drone doesn't come with a receiver is that true?

Hello ! I have almost the same setup, but can’t go more them 500mts. I have already checked the channels, and everything but can’t figure out what possible going out. Do you have some advices ?

I got the geprc baby croc and absolutely love it! The flight time is insane! I did all kinds of little finicky mods to it and it really is one of my favourite quads, awesome to explore and scope around!

1:19 the bug😱

Hey im looking forward on getting this woth two 1800mah 95c 4s batteries with the radiomaster pocket and the eachine800d goggles with the hawkeye mini thumb 4k fro fpv drones the only thing i dont know is how fast it can go and how long will it fly with the battery i mentioned.

I build myself a 3" toothpick, that can fly decent with a 2s 18650 battery and I got 31min flight time, and I can even use it with a 450mah 4s for hard freestyle

How max min flight did you get?

I built my 4S 3000mAh pack using a $10 spot welder from AliX. The nickel plates don't even get worm during the flight so I guess it works OK.

A tip for getting GPS lock faster: connect the FC to a powerbank using a USB cable, that should power the GPS on but not the VTX. PS. You seem to get a lot of motor static in your video. What capacitor did you use?

Hmm, seeing those videos I need to get back to the FPV stuff, havent flown since 2 years.... too bad. I wasnt good at all in piloting FPV drones, but since my first drone was a Eachine Tyro 129 (bought 2 of them) which are 7inch copter, I liked the bigger copters.

😜🤙

I'm working on my Rekon 5 doing the same thing. It's a wiring problem.

Another 4" build but with heavier frame and more powerful motors . With molicel p42 21700 . Get good 20mins too and still a decent 140ish km/h top speed . It's the sweet spot .

crocodile baby with 1404 2900kv motors with 4x2.5 2blade props i get 20min with a 1300mah 3s lipo no acro. its slow and light perfect for my long range things. i have a 3s liion and 4s too but never tested them down to 3V. i would try to find the lipo sweetspot, its more fun with less weight, and more mah is always an option

Did you install GPS on the drone for this flight?

Nice! l Love these custom li-ion batteries! I made a 4s 4200mah pack for my 5" race quad, and get 22-24 minutes consistently flying pretty normal (dji 2305 2400kv motor with snail 5048 props.) I don't go crazy hard, but wasn't easy on the battery either. My worst flight was about 18 minutes when I was trying to push it. You certainly felt the extra weight and were down to about 2/3 power, but the flight time was so nice! I also made a 4s 10,000mah battery for the drone, which was a brick, but I got 34 minutes without any modifications.

I'm using the same homemade packs on my flywoo explorer and they are working great! It's really nice to not be using lipo batteries that swell up no matter how well you treat them.

How is your baby ape?

I'm starting to wonder if mounting the fpv antenna off of the nose and pointing it downward might be better for flying long range. That way nothing is blocking it while flying away or flying back home. It seems to work for my protocol antenna so why not the fpv one as well? 🤔

not sure if you know but carbon dust it worse than asbestos when sanding it creates microscopic hooks which get permanently lodged in your lungs. I was taught to wear a positive pressure mask when doing any carbon prep i was learning to make air-frame structures.

What are the odds man. I just received the very same 1504 2300KV motors just last week to build a 4" LR quad too lol.

I built two 4" LR quads a couple of years ago. They still work great!

I HAVE BUILD 5 INCH AND FLY GREAT ❤❤❤

Bro. Same. Moblite7. Insta360 go. And I'm thinking of getting the Runcam thumb pro.

Nice build man! You got a like and a sub from me 🤙🏼

Very nice build! I like you sharing your thoughts 😊 Almost all the time I'm doing the same: cheap parts on one side and expensive were it is needed. Flies great Your setup 😮😍

I have the DarwinFPV FoldApe 4 which uses these motors. I get about 15 min flight time on a 3s 850 mah battery. The motors apparently are DJI motors actually just rebranded.

How do you like the motors? I have the Darwin baby ape 2 with them on it was thinking about upgrading them weak magnets

Nice flying man!

Nice build ! Great job :)

Hope you do great 😊

Awesome videos buddy. I think I’ve watched all your fpv videos over the last two days!! I myself just got the baby ape pro v2 as well. I’ve only flown it on 2s and it’s tons of fun. I’m waiting to go to an open field to rip it on 3s. How long have you had the baby ape now? And is everything still working fine? I think you should really do a long term review of it since it seems like you have flown it for a while now. And your video style is really nice. I think I’m also on one of the WhatsApp groups with you, as I also know henno and a few of the other guys. Made 99% of my fpv purchases from there!

Using the Darwin 850 mah batteries I can get a good 6 min cruising around...😉

aio board 35amp is so the wrong kind of fc/esc for a 5inch long range

How to setup vtx power through switch?

I use the apex 4" as my long ranger . Actually it does everything . Heavier build but it's tough . Using bigger motors and 21700 li-ions it's 20min flyer with great top speeds too . ( around 140km/h on liions and 160kms on lipo )

Wow, so beautiful. Keep up the good work and God bless you and your family and America 🇺🇸

Hi, I think you forgot the 50ohm SMA terminator, is that a silicone protector? I have that same antenna and can reach that range with 200mw or 400mw with full clear picture.

Nice build sir, i too am building a 4 inch long range drone from the frame up but i am using the flywoo Explorer LR 4 frame and I am going to be using Arducopter instead. Please make more videos about your long distance drone

Use both a patch and a lollipop antenna and use steadyview x on diversity. You will be impressed what the cobra x goggles can do. That’s what I use and at 400 mw I fly the largest part of my neighbourhood.

I was at the golden gate in the free state after Clarens the other day and the scenery was beating beautiful. Something like this video and I can assure you I’m going back there for some fpv exploring. Thanks for sharing man.

Beautiful!

Nice job Adin. Very good flying and flight time for a 4" analog quad!

Hey Adin, thanks for sharing this journey. I’m also gaining a love for long rage quads lately.

What camera mount did you use? I have the Babyape pro v2 and I want to put an Insta360 go 2 on it, but I cannot find a mount that will work.

Stock motors ? I bought the 5000kv motors to swap out. Will I ever do It? lol. Prob take me a bit. Looks great tho.