Видео

sorry...

The previous owner had damaged the panel by putting a handle on the side panel, so the panel had to be polished, putty-filled, and painted to make this repair. The buttons will eventually turn yellow in the dark from the ABS, which will spoil the appearance, so we took the initiative and painted the entire panel. I have a hard time taking care of plastic parts when maintaining old machines...

Yes! This one. ruclips.net/video/8R3UbteNxJA/видео.html

eBay. replacing a common parallel 8080 bus LCD with various adjustments to fit the machine.

I think that there were a lot of Korg's AI sound sources that were used all the way from M1 in terms of waveforms. 01/W was a milestone in the M1 series, and X3/2 was a step forward by reducing the sampling rate to 32 kHz to save memory and other costs, and by changing the keyboard from Yamaha's FS keyboard to a FATAR keyboard. I think that X3/2 is an enhancement of the M1 series while reducing costs. On a personal note, my first synth was the X3, so I have a deep attachment to it. Also, I have a deep attachment to these two models, as 01/W was the model that got me started in synthesizer repair. Translated with www.DeepL.com/Translator (free version)

Technics! In other words, it is a Panasonic product, which was manufactured in Japan, but was never released in Japan and was reimported from the US more than a decade ago.

@@fmori_synth cool to know. thanks

All of the phrases were improvised by me and played on the spot from tones that sounded right. Thank you.

why are you hating on keyboards?

@@g-starthefirst I’m not , I just don’t like the Xp 50

I've gone from the JV-1080/XP-50 to a sound source that is “very normal and can do anything”. Compared to the previous models, the JV-1080/XP-50 certainly feels more mature. The keyboard was not semi-weighted, and compared to the later XP-80, the machine looked mediocre in terms of playability and visibility, and I agree with you. However, this machine was certainly a turning point for Roland synthesizers in terms of both software and hardware, and I think it is an important machine in the history of Roland. Well, the XP-80 (as long as the keys are in working order!) I like the XP-80 better, though! Translated with www.DeepL.com/Translator (free version)

I have purchased a bus compatible LCD on eBay, but I cannot put it on as is, remove the inverter circuit, change each resistance value, adjust the contrast voltage, etc. Therefore, a little bit of knowledge is required to replace it.

ありがとうございます。演奏的にはゲームミュージックと久石譲さんの曲集を独学で練習してた感じです。影響を受けて演奏をコピーして、、、みたいなことはやったことありません。T-SQUAREはよく聞いていたので和泉さんの演奏は好きでしたけどね。

ありがとうございます。音量100%にすると割れるのは仕様みたいですね。 修理結果でどうなったか、どういう状態なのかは中を見てみないとわかりません… 電解液の腐食でパターン断裂がよく起こりますので、そういうところを念入りに確認されてみると良いかと思います

ご親切にありがとうございました！ 基盤パターンの断裂ですか…！コンデンサ・オペアンプ類替えても変わらなかった理屈が分かります。 感謝します！

Right now I am too busy repairing other models and working at my day job as an electrician to make a video, but I will try to find time to make a video before it sells out.

Thank You!

The D-70 is one of my favorite models, but the weights are peeling and the velocity sensor board has been removed. There is also the problem of the connection where the film board is thermo-compressed to the substrate peeling off, so it is difficult to find a unit with a keybed that works perfectly properly even in Japan. In Japan, people say, “This is not an LA synth,” but I personally like this machine very much. I would like to acquire the skills to repair the keybed as well. Translated with www.DeepL.com/Translator (free version)

It was reasonably well distributed in Japan, but there are not many machines in existence in Japan because of the problem of the glue attaching the weights on the back of the keyboard melting and destroying the keybed.

Japanese people have become so poor that even if they sell it for the equivalent of $400 in Japan, it will not sell at all and they will cry....

ruclips.net/video/MwcdAmxd5pY/видео.htmlsi=pM-o-uZMK3ea5mFG

The one I replaced is an 8-bit 8080-bus LCD with LED backlighting, and I always get it from eBay, from a company called BuyDisplay. However, even if you buy this display, you cannot replace it as-is; you will need to transplant the display harness, remove the original inorganic EL inverter circuit, match the contrast adjustment voltage and change the constant value of the current limiting resistor for the backlight, and many other things.

We apologize. I do not know. I am a Windows user who has been using the Cakewalk series for decades and have never used any other sequencer or DAW.

Thank you!

Although this machine was entrusted to me for repair and is not mine, it was convenient to be able to handle Radias with a single M3. M3 itself is also rarely seen in Japan.

What is the brand of this black keyboard?

Thank You! I'm glad to hear that because I've done everything on my own and I've had almost nothing to say so.

no. all sounds is factory presets.

I think so too. I especially like the KARMA function and lose track of time when I play it.

@@fmori_synth how's the key action on these? I can buy one for 200$ and am really seeking a good 88 keybed board

JD-800の53.Pianoですけど色んなソフト音源、それこそRolandCloudのJD-800も含めてですけど個人的に一番似てるっていうか弾いてて小室さんの感じ出しやすいのはJV-80/90/1000のA.Piano 1Tx4 っていうプリセットパッチなんですよ。波形の構成とかは違うのかもしれませんけど。ソフト化されてないマシンなんで殆ど知られてないんですよねぇ

Sorry for the late reply. I think I was using channel aftertouch on the TRINITY pro I was using on the master to control the feedback level.

Tout est dans les préréglages d'usine, vous savez ?